Contents

# 호환성

Specifies compatibility settings for text documents. These options help in fine-tuning LibreOffice when importing Microsoft Word documents.

이 명령을 사용하려면...

Open a text document, choose LibreOffice - PreferencesTools - Options - LibreOffice Writer - Compatibility.

여기서 지정한 일부 설정은 현재 문서에만 적용되며 각 문서마다 따로 지정해야 합니다.

### Add spacing between paragraphs and tables

In LibreOffice Writer, paragraph spacing is defined differently than in Microsoft Word documents. If you have defined spacing between two paragraphs or tables, spacing is also added in the corresponding Word documents.

Specifies whether to add Microsoft Word-compatible spacing between paragraphs and tables in LibreOffice Writer text documents.

### Add paragraph and table spacing at top of first page and page breaks

Specifies whether paragraph spacing at the top of a page will also be effective at the beginning of a page or column if the paragraph is positioned on the first page of the document. The same applies for a page break.

If you import a Word document, the spaces are automatically added during the conversion.

### Use OpenOffice.org 1.1 tab stop formatting

Specifies how to align text at tab stops beyond the right margin, how to handle decimal tab stops, and how to handle tab stops close to a line break. If this check box is not selected, tab stops are handled in the same way as in other Office applications.

현재 버전의 Writer로 생성한 텍스트 문서는 새 탭 스톱 핸들링이 기본값으로 사용됩니다. 반면 StarOffice 8 이나 OpenOffice.org 2.0 이전 버전의 Writer에서 생성한 텍스트 문서에는 이전 버전의 탭 스톱 핸들링이 적용됩니다.

### 텍스트 줄 사이에 선행 공백을 추가하지 않음

사용하는 글꼴에 추가 선행 속성이 포함되어 있어도 텍스트 줄 사이에 선행 공백을 추가하지 않도록 지정합니다.

현재 버전의 Writer로 생성한 텍스트 문서는 기본값으로 선행 공백이 사용됩니다. 반면 StarOffice 8 이나 OpenOffice.org 2.0 이전 버전의 Writer에서 생성한 텍스트 문서에는 선행 공백이 사용되지 않습니다.

### Use OpenOffice.org 1.1 line spacing

이 옵션을 사용하지 않으면 텍스트 줄의 서식을 비례 줄 간격으로 설정하는 새로운 프로세스가 적용됩니다. 옵션을 사용하면 텍스트 줄의 서식을 비례 줄 간격으로 설정하는 이전 방법이 적용됩니다.

현재 버전의 Writer로 생성한 텍스트 문서와 최신 버전의 MS Word에서는 새 프로세스가 사용됩니다. 반면 StarOffice 8 이나 OpenOffice.org 2.0 이전 버전의 Writer에서 생성한 텍스트 문서에는 예전 프로세스가 사용되지 않습니다.

### 테이블 셀의 아래쪽에 단락 및 테이블 간격 추가

표 셀의 마지막 단락을 포함하여 각 단락에 아래쪽 간격을 추가하도록 지정합니다.

If the option is off, table cells will be formatted as in Writer versions prior to StarOffice 8 or OpenOffice.org 2.0. If the option is on, an alternative method of formatting table cells will be applied. The option is on by default for new documents created with LibreOffice and for documents imported from Microsoft Word format.

### Use OpenOffice.org 1.1 object positioning

위쪽 및 아래쪽 단락 간격을 기준으로 문자나 단락에 고정된 부동 개체의 위치를 계산하는 방법을 지정합니다.

이 옵션을 설정하면 부동 개체가 StarOffice 8 또는 OpenOffice.org 2.0 이전의 Writer 버전에서처럼 배치됩니다. 이 옵션을 해제하면 부동 개체는 Microsoft Word에서 사용된 방법과 유사한 다른 방법을 사용하여 배치됩니다.

The option will be set to off for new documents. For Writer documents created by a version prior to OpenOffice.org 2.0 the option is on.

### StarSuite 6.0/7 개체 주위에 텍스트 배치 사용

By default, page header and footer content, as well as footnote and endnote content, does not wrap around floating screen objects. This behavior mirrors how Microsoft Word handles these objects. To enable text wrapping around floating screen objects in headers/footers or footnotes/endnotes, turn on this option.

If the option is off, which is the default setting, the new text wrapping will be applied.

### 개체 위치 지정 시 배치 스타일 고려

문자나 단락에 고정된 부동 개체를 배치하는 복합 과정이 동작하는 방식을 지정합니다. StarOffice 8 이나 OpenOffice.org 2.0 이전의 Writer 버전에서는 반복적인 과정이 사용되지만, 현재 버전에서는 Microsoft Word의 동일 과정과 유사한 간단한 과정이 사용됩니다.

이 옵션을 해제하면 개체 위치를 지정하는 LibreOffice 반복 프로세스가 사용됩니다. 이 옵션을 설정하면 Microsoft Word 문서와의 호환성을 보장하기 위해 새로운 단순 프로세스가 사용됩니다.

### Justify lines with a manual line break in justified paragraphs

활성화되면 Writer는 정렬된 문 안에서 Shift + Enter로 끝나는 줄의 단어 사이에 공백을 추가합니다. 비활성화되면, 줄을 정렬하기 위하여 단어 사이 공백을 확장하지 않습니다.

.odt 텍스트 문서에 대하여 이 설정은 기본으로 켜져 있습니다. 이 설정은.odt 텍스트 문서 형식된 문서와 함께 저장되고 로드됩니다. 이 설정은 예전. sxw 텍스트 문서에서는 저장되지 않으며, 따라서 .sxw 텍스트 문서에 대해서는 꺼집니다.

### Protect form (no longer protects whole document. Insert write protected section instead)

When importing forms from Microsoft Word, the document content outside of form controls is locked and can only be imported as read-only. This setting allows you to edit the document by enclosing the form controls in protected sections.

### Word-compatible trailing blanks

Ensure trailing spaces and their highlighting are compatible with Microsoft Word. This option is enabled by default for imported Microsoft Word formats (.doc, .docx, .rtf). For ODF files, the option is disabled by default.

### Tolerate white lines that may appear in PDF page backgrounds

Use LibreOffice 4.3 anchoring paint order and tolerate white lines that may appear in PDF page backgrounds created from legacy documents.

### Hide paragraphs of mail merge fields with empty value when generating merged documents

When this setting is active, database fields that expand to empty values are treated as hidden paragraph fields. The option is enabled by default and is automatically applied to non-ODF documents (to ensure compatibility with other office suites). For existing ODT documents, the option remains disabled if the setting was not previously configured, preserving the layout of legacy documents.

### Render non-breaking spaces (NBSP) as standard-space-width (off for fixed size)

When this option is enabled (opt-in for both old and new documents), non-breaking space character will no longer be strictly fixed in width. When disabled, the NBSP character has always the width of a standard space (U+0020) on the given line. This change is only noticeable when the paragraph is justified.

Additionally, when non-printable characters are displayed, a tilde (~) or degree symbol (°) will now appear in place of a non-breaking space (NBSP), as the gray field alone is often not visible.

### Do not add an extra space after number in footnotes / endnotes with hanging first line

This option removes extra spacing between the footnote number and its text when the paragraph has a hanging indent, such as in Microsoft Word.

### Set tabstops relative to indent of paragraph

This setting makes all paragraph tab positions relative to left page margin, not to the indent of the paragraph.

### Allow tabs to extend beyond the right margin

When this option is enabled, paragraph tab stops can extend beyond the right margin. When disabled, tab stops beyond the right margin are ignored.

### Do not mirror drawing objects anchored in paragraphs with an RTL writing direction

Writer automatically mirrors drawing objects anchored in right-to-left (RTL) paragraphs, whereas Microsoft Word does not. When this option is enabled (intended for DOCX files), Writer will not automatically mirror the position of drawing objects simply because they are anchored in an RTL text node.

### Render endnotes at the end of document inline, rather than on a separate page

By default, Writer places endnotes on one or more separate endnote pages, while Microsoft Word positions them inline at the end of the document, immediately following the body text. This setting creates a dedicated section at the layout level and places the endnotes within that section, effectively making them inline.

### Use Word-compatible font metrics for text grid and Asian text

Whenever Microsoft Word uses a CJK font to lay out text, it applies an extra multiplier to the line height. This behavior depends solely on the font file itself—it does not matter whether the font is set as the East Asian font or if the text contains any CJK characters. The only determining factor is whether the font identifies itself as a CJK font.

If the font reports coverage for any of the following code pages, the line height multiplier is applied:

- CP932 (JIS/Japan)

- CP936 (Simplified Chinese)

- CP949 (Korean Wansung encoding)

- CP950 (Traditional Chinese)

Writer would respect the original font metrics when laying out DOC/DOCX files. This change makes Writer try to emulate Microsoft Word behavior instead, subject to a compatibility flag.

### Make whitespace character height not affect line height

Remove space and tab characters height value from line height calculation. This setting is enabled by default in Microsoft Word document file formats.

### Underline Word-compatible trailing blanks

Microsoft Word’s Underline Trailing Spaces compatibility option. Previously, the feature behaved as if this option was always enabled, while in Word it is disabled by default.

### Adjust spaces to half the width of ideographic spaces, using Word-compatible rules

When enabled, Writer adjusts the width of certain normal space characters to one half the width of a CJK ideographic space. This adjustment is only applied to leading and trailing spaces, multiple sequential spaces, and spaces between CJK characters.

This flag is enabled automatically when importing DOCX files with the w:balanceSingleByteDoubleByteWidth option enabled and also when importing DOC files with the fDntBlnSbDbWid compatibility flag unset.

### Adjust line heights to grid height in table

For CJK text documents using a CJK Text Grid, the number of lines per page and the number of characters per line are specified in the page style. Typically, adjusting the number of lines per page also impacts tables. This compatibility option disables that behavior, ensuring tables remain unaffected by the grid lines per page setting. The option was introduced to match a similar feature in Microsoft Word, allowing these documents to be rendered accurately.

### Ignore paragraph directions for list label alignment

Writer now applies list label direction, ensuring that start and end label alignment match start and end paragraph alignment. When this option is enabled, Writer ignores paragraph direction for list labels, always using left-to-right alignment.

In order to preserve the layout of existing documents, this flag is enabled automatically when loading an ODF created with earlier versions of LibreOffice.

## 기본값으로 사용

Click to use the current settings on this tab page as the default for further sessions with LibreOffice.

공장 기본값은 다음과 같이 설정됩니다. 다른 옵션은 모두 비활성화되고 다음 옵션만 활성화됩니다.

1. Add spacing between paragraphs and tables

2. Add paragraph and table spacing at top of first page and page breaks

3. 테이블 셀의 아래쪽에 단락 및 테이블 간격 추가

4. Justify lines with manual line breaks in justified paragraphs

5. Hide paragraph of mail merge fields with empty values when generating merged documents.

6. Set tab stops relative to indent of paragraphs

Please support us!