PG_UPGRADE(1)           PostgreSQL 9.3.2 Documentation           PG_UPGRADE(1)



NAME
       pg_upgrade - upgrade a PostgreSQL server instance

SYNOPSIS
       pg_upgrade -b oldbindir -B newbindir -d olddatadir -D newdatadir
                  [option...]

DESCRIPTION
       pg_upgrade (formerly called pg_migrator) allows data stored in
       PostgreSQL data files to be upgraded to a later PostgreSQL major
       version without the data dump/reload typically required for major
       version upgrades, e.g. from 8.4.7 to the current major release of
       PostgreSQL. It is not required for minor version upgrades, e.g. from
       9.0.1 to 9.0.4.

       Major PostgreSQL releases regularly add new features that often change
       the layout of the system tables, but the internal data storage format
       rarely changes.  pg_upgrade uses this fact to perform rapid upgrades by
       creating new system tables and simply reusing the old user data files.
       If a future major release ever changes the data storage format in a way
       that makes the old data format unreadable, pg_upgrade will not be
       usable for such upgrades. (The community will attempt to avoid such
       situations.)

       pg_upgrade does its best to make sure the old and new clusters are
       binary-compatible, e.g. by checking for compatible compile-time
       settings, including 32/64-bit binaries. It is important that any
       external modules are also binary compatible, though this cannot be
       checked by pg_upgrade.

       pg_upgrade supports upgrades from 8.3.X and later to the current major
       release of PostgreSQL, including snapshot and alpha releases.

OPTIONS
       pg_upgrade accepts the following command-line arguments:

       -b old_bindir, --old-bindir=old_bindir
           the old PostgreSQL executable directory; environment variable
           PGBINOLD

       -B new_bindir, --new-bindir=new_bindir
           the new PostgreSQL executable directory; environment variable
           PGBINNEW

       -c, --check
           check clusters only, don't change any data

       -d old_datadir, --old-datadir=old_datadir
           the old cluster data directory; environment variable PGDATAOLD

       -D new_datadir, --new-datadir=new_datadir
           the new cluster data directory; environment variable PGDATANEW

       -j, --jobs
           number of simultaneous processes or threads to use

       -k, --link
           use hard links instead of copying files to the new cluster (use
           junction points on Windows)

       -o options, --old-options options
           options to be passed directly to the old postgres command

       -O options, --new-options options
           options to be passed directly to the new postgres command

       -p old_port_number, --old-port=old_portnum
           the old cluster port number; environment variable PGPORTOLD

       -P new_port_number, --new-port=new_portnum
           the new cluster port number; environment variable PGPORTNEW

       -r, --retain
           retain SQL and log files even after successful completion

       -u user_name, --user=user_name
           cluster's super user name; environment variable PGUSER

       -v, --verbose
           enable verbose internal logging

       -V, --version
           display version information, then exit

       -?, -h, --help
           show help, then exit

USAGE
       These are the steps to perform an upgrade with pg_upgrade:

        1. Optionally move the old cluster: If you are using a
           version-specific installation directory, e.g.  /opt/PostgreSQL/9.1,
           you do not need to move the old cluster. The graphical installers
           all use version-specific installation directories.

           If your installation directory is not version-specific, e.g.
           /usr/local/pgsql, it is necessary to move the current PostgreSQL
           install directory so it does not interfere with the new PostgreSQL
           installation. Once the current PostgreSQL server is shut down, it
           is safe to rename the PostgreSQL installation directory; assuming
           the old directory is /usr/local/pgsql, you can do:

               mv /usr/local/pgsql /usr/local/pgsql.old

           to rename the directory.

        2. For source installs, build the new version: Build the new
           PostgreSQL source with configure flags that are compatible with the
           old cluster.  pg_upgrade will check pg_controldata to make sure all
           settings are compatible before starting the upgrade.

        3. Install the new PostgreSQL binaries: Install the new server's
           binaries and support files.

           For source installs, if you wish to install the new server in a
           custom location, use the prefix variable:

               gmake prefix=/usr/local/pgsql.new install

        4. Install pg_upgrade and pg_upgrade_support: Install the pg_upgrade
           binary and pg_upgrade_support library in the new PostgreSQL
           installation.

        5. Initialize the new PostgreSQL cluster: Initialize the new cluster
           using initdb. Again, use compatible initdb flags that match the old
           cluster. Many prebuilt installers do this step automatically. There
           is no need to start the new cluster.

        6. Install custom shared object files: Install any custom shared
           object files (or DLLs) used by the old cluster into the new
           cluster, e.g.  pgcrypto.so, whether they are from contrib or some
           other source. Do not install the schema definitions, e.g.
           pgcrypto.sql, because these will be upgraded from the old cluster.

        7. Adjust authentication: pg_upgrade will connect to the old and new
           servers several times, so you might want to set authentication to
           trust or peer in pg_hba.conf, or if using md5 authentication, use a
           ~/.pgpass file (see Section 31.15, "The Password File", in the
           documentation).

        8. Stop both servers: Make sure both database servers are stopped
           using, on Unix, e.g.:

               pg_ctl -D /opt/PostgreSQL/8.4 stop
               pg_ctl -D /opt/PostgreSQL/9.0 stop

           or on Windows, using the proper service names:

               NET STOP postgresql-8.4
               NET STOP postgresql-9.0

           or

               NET STOP pgsql-8.3  (PostgreSQL 8.3 and older used a different service name)

        9. Run pg_upgrade: Always run the pg_upgrade binary of the new server,
           not the old one.  pg_upgrade requires the specification of the old
           and new cluster's data and executable (bin) directories. You can
           also specify user and port values, and whether you want the data
           linked instead of copied (the default).

           If you use link mode, the upgrade will be much faster (no file
           copying) and use less disk space, but you will not be able to
           access your old cluster once you start the new cluster after the
           upgrade. Link mode also requires that the old and new cluster data
           directories be in the same file system. (Tablespaces and pg_xlog
           can be on different file systems.) See pg_upgrade --help for a full
           list of options.

           The --jobs option allows multiple CPU cores to be used for
           copying/linking of files and to dump and reload database schemas in
           parallel; a good place to start is the maximum of the number of CPU
           cores and tablespaces. This option can dramatically reduce the time
           to upgrade a multi-database server running on a multiprocessor
           machine.

           For Windows users, you must be logged into an administrative
           account, and then start a shell as the postgres user and set the
           proper path:

               RUNAS /USER:postgres "CMD.EXE"
               SET PATH=%PATH%;C:\Program Files\PostgreSQL\9.0\bin;

           and then run pg_upgrade with quoted directories, e.g.:

               pg_upgrade.exe
                       --old-datadir "C:/Program Files/PostgreSQL/8.4/data"
                       --new-datadir "C:/Program Files/PostgreSQL/9.0/data"
                       --old-bindir "C:/Program Files/PostgreSQL/8.4/bin"
                       --new-bindir "C:/Program Files/PostgreSQL/9.0/bin"

           Once started, pg_upgrade will verify the two clusters are
           compatible and then do the upgrade. You can use pg_upgrade --check
           to perform only the checks, even if the old server is still
           running.  pg_upgrade --check will also outline any manual
           adjustments you will need to make after the upgrade. If you are
           going to be using link mode, you should use the --link option with
           --check to enable link-mode-specific checks.  pg_upgrade requires
           write permission in the current directory.

           Obviously, no one should be accessing the clusters during the
           upgrade.  pg_upgrade defaults to running servers on port 50432 to
           avoid unintended client connections. You can use the same port
           number for both clusters when doing an upgrade because the old and
           new clusters will not be running at the same time. However, when
           checking an old running server, the old and new port numbers must
           be different.

           If an error occurs while restoring the database schema, pg_upgrade
           will exit and you will have to revert to the old cluster as
           outlined in Step 14 below. To try pg_upgrade again, you will need
           to modify the old cluster so the pg_upgrade schema restore
           succeeds. If the problem is a contrib module, you might need to
           uninstall the contrib module from the old cluster and install it in
           the new cluster after the upgrade, assuming the module is not being
           used to store user data.

        10. Restore pg_hba.conf: If you modified pg_hba.conf to use trust,
           restore its original authentication settings. It might also be
           necessary to adjust other configurations files in the new cluster
           to match the old cluster, e.g.  postgresql.conf.

        11. Post-Upgrade processing: If any post-upgrade processing is
           required, pg_upgrade will issue warnings as it completes. It will
           also generate script files that must be run by the administrator.
           The script files will connect to each database that needs
           post-upgrade processing. Each script should be run using:

               psql --username postgres --file script.sql postgres

           The scripts can be run in any order and can be deleted once they
           have been run.

               Caution
               In general it is unsafe to access tables referenced in rebuild
               scripts until the rebuild scripts have run to completion; doing
               so could yield incorrect results or poor performance. Tables
               not referenced in rebuild scripts can be accessed immediately.

        12. Statistics: Because optimizer statistics are not transferred by
           pg_upgrade, you will be instructed to run a command to regenerate
           that information at the end of the upgrade. You might need to set
           connection parameters to match your new cluster.

        13. Delete old cluster: Once you are satisfied with the upgrade, you
           can delete the old cluster's data directories by running the script
           mentioned when pg_upgrade completes. You can also delete the old
           installation directories (e.g.  bin, share).

        14. Reverting to old cluster: If, after running pg_upgrade, you wish
           to revert to the old cluster, there are several options:

           o   If you ran pg_upgrade with --check, no modifications were made
               to the old cluster and you can re-use it anytime.

           o   If you ran pg_upgrade with --link, the data files are shared
               between the old and new cluster. If you started the new
               cluster, the new server has written to those shared files and
               it is unsafe to use the old cluster.

           o   If you ran pg_upgrade without --link or did not start the new
               server, the old cluster was not modified except that, if
               linking started, a .old suffix was appended to
               $PGDATA/global/pg_control. To reuse the old cluster, possibly
               remove the .old suffix from $PGDATA/global/pg_control; you can
               then restart the old cluster.


NOTES
       pg_upgrade does not support upgrading of databases containing these
       reg* OID-referencing system data types: regproc, regprocedure, regoper,
       regoperator, regconfig, and regdictionary. (regtype can be upgraded.)

       All failure, rebuild, and reindex cases will be reported by pg_upgrade
       if they affect your installation; post-upgrade scripts to rebuild
       tables and indexes will be generated automatically. If you are trying
       to automate the upgrade of many clusters, you should find that clusters
       with identical database schemas require the same post-upgrade steps for
       all cluster upgrades; this is because the post-upgrade steps are based
       on the database schemas, and not user data.

       For deployment testing, create a schema-only copy of the old cluster,
       insert dummy data, and upgrade that.

       If you are upgrading a pre-PostgreSQL 9.2 cluster that uses a
       configuration-file-only directory, you must pass the real data
       directory location to pg_upgrade, and pass the configuration directory
       location to the server, e.g.  -d /real-data-directory -o '-D
       /configuration-directory'.

       If using a pre-9.1 old server that is using a non-default Unix-domain
       socket directory or a default that differs from the default of the new
       cluster, set PGHOST to point to the old server's socket location. (This
       is not relevant on Windows.)

       A Log-Shipping Standby Server (Section 25.2, "Log-Shipping Standby
       Servers", in the documentation) cannot be upgraded because the server
       must allow writes. The simplest way is to upgrade the primary and use
       rsync to rebuild the standbys. You can run rsync while the primary is
       down, or as part of a base backup (Section 24.3.2, "Making a Base
       Backup", in the documentation) which overwrites the old standby
       cluster.

       If you want to use link mode and you do not want your old cluster to be
       modified when the new cluster is started, make a copy of the old
       cluster and upgrade that in link mode. To make a valid copy of the old
       cluster, use rsync to create a dirty copy of the old cluster while the
       server is running, then shut down the old server and run rsync again to
       update the copy with any changes to make it consistent. You might want
       to exclude some files, e.g.  postmaster.pid, as documented in Section
       24.3.3, "Making a Base Backup Using the Low Level API", in the
       documentation.

   Limitations in Upgrading from PostgreSQL 8.3
       Upgrading from PostgreSQL 8.3 has additional restrictions not present
       when upgrading from later PostgreSQL releases. For example, pg_upgrade
       will not work for upgrading from 8.3 if a user column is defined as:

       o   a tsquery data type

       o   data type name and is not the first column

       You must drop any such columns and upgrade them manually.

       pg_upgrade will not work if the ltree contrib module is installed in a
       database.

       pg_upgrade will require a table rebuild if:

       o   a user column is of data type tsvector

       pg_upgrade will require a reindex if:

       o   an index is of type hash or GIN

       o   an index uses bpchar_pattern_ops

       Also, the default datetime storage format changed to integer after
       PostgreSQL 8.3. pg_upgrade will check that the datetime storage format
       used by the old and new clusters match. Make sure your new cluster is
       built with the configure flag --disable-integer-datetimes.

       For Windows users, note that due to different integer datetimes
       settings used by the graphical installer and the MSI installer, it is
       only possible to upgrade from version 8.3 of the installer distribution
       to version 8.4 or later of the installer distribution. It is not
       possible to upgrade from the MSI installer to the new graphical
       installer.

SEE ALSO
       initdb(1), pg_ctl(1), pg_dump(1), postgres(1)



PostgreSQL 9.3.2                     2013                        PG_UPGRADE(1)
