PV(1)

NAME
pv - monitor the progress of data through a pipe

SYNOPSIS
pv [OPTION] [FILE]...
pv [-h|-V]

DESCRIPTION
pv allows a user to see the progress of data through a pipeline, by giving information such as time elapsed, percentage completed (with progress bar), current throughput rate, total data transferred, and ETA. To use it, insert it in a pipeline between two processes, with the appropriate options. Its standard input will be passed through to its standard output and progress will be shown on standard error. pv will copy each supplied FILE in turn to standard output (- means standard input), or if no FILEs are specified just standard input is copied. This is the same behaviour as cat(1). A simple example to watch how quickly a file is transferred using nc(1):
    pv file | nc -w 1 somewhere.com 3000
A similar example, transferring a file from another process and passing the expected size to pv:
    cat file | pv -s 12345 | nc -w 1 somewhere.com 3000
A more complicated example using numeric output to feed into the dialog(1) program for a full-screen progress display:

    (tar cf - . \
    | pv -n -s $(du -sb . | awk '{print $1}') \
    | gzip -9 > out.tgz) 2>&1 \
    | dialog --gauge 'Progress' 7 70
Taking an image of a disk, skipping errors:
    pv -EE /dev/sda > disk-image.img
Writing an image back to a disk:
    pv disk-image.img > /dev/sda
Zeroing a disk:
    pv < /dev/zero > /dev/sda
Note that if the input size cannot be calculated, and the output is a block device, then the size of the block device will be used and pv will automatically stop at that size as if -S had been given.

OPTIONS
pv takes many options, which are divided into display switches, output modifiers, and general options.

DISPLAY SWITCHES
If no display switches are specified, pv behaves as if -p, -t, -e, -r, and -b had been given (i.e. everything except average rate is switched on). Otherwise, only those display types that are explicitly switched on will be shown.

-p, --progress
    Turn the progress bar on. If standard input is not a file and no size was given (with the -s modifier), the progress bar cannot indicate how close to completion the transfer is, so it will just move left and right to indicate that data is moving.

-t, --timer
    Turn the timer on. This will display the total elapsed time that pv has been running for.

-e, --eta
    Turn the ETA timer on. This will attempt to guess, based on previous transfer rates and the total data size, how long it will be before completion. This option will have no effect if the total data size cannot be determined.

-r, --rate
    Turn the rate counter on. This will display the current rate of data transfer.

-a, --average-rate
    Turn the average rate counter on. This will display the average rate of data transfer so far.

-b, --bytes
    Turn the total byte counter on. This will display the total amount of data transferred so far.

-F, --format FORMAT
    Ignore the options -p, -t, -e, -r, -a, and -b, and instead use the format string FORMAT to determine the output format. See the FORMATTING section below.

-n, --numeric
    Numeric output. Instead of giving a visual indication of progress, pv will give an integer percentage, one per line, on standard error, suitable for piping (via convoluted redirection) into dialog(1). Note that -f is not required if -n is being used.

    Note that if --numeric is in use, then adding --bytes will cause the number of bytes processed so far to be output instead of a percentage; if --line-mode is also in use, then instead of bytes or a percentage, the number of lines so far is output. And finally, if --timer is also in use, then each output line is prefixed with the elapsed time so far, as a decimal number of seconds.

-q, --quiet
    No output. Useful if the -L option is being used on its own to just limit the transfer rate of a pipe.

OUTPUT MODIFIERS

-W, --wait
    Wait until the first byte has been transferred before showing any progress information or calculating any ETAs. Useful if the program you are piping to or from requires extra information before it starts, eg piping data into gpg(1) or mcrypt(1) which require a passphrase before data can be processed.

-s SIZE, --size SIZE
    Assume the total amount of data to be transferred is SIZE bytes when calculating percentages and ETAs. The same suffixes of "k", "m" etc can be used as with -L.

-l, --line-mode
    Instead of counting bytes, count lines (newline characters). The progress bar will only move when a new line is found, and the value passed to the -s option will be interpreted as a line count.

-0, --null
    Count lines as null terminated. This option implies --line-mode.

-i SEC, --interval SEC
    Wait SEC seconds between updates. The default is to update every second. Note that this can be a decimal such as 0.1.

-w WIDTH, --width WIDTH
    Assume the terminal is WIDTH characters wide, instead of trying to work it out (or assuming 80 if it cannot be guessed).

-H HEIGHT, --height HEIGHT
    Assume the terminal is HEIGHT rows high, instead of trying to work it out (or assuming 25 if it cannot be guessed).

-N NAME, --name NAME
    Prefix the output information with NAME. Useful in conjunction with -c if you have a complicated pipeline and you want to be able to tell different parts of it apart.

-f, --force
    Force output. Normally, pv will not output any visual display if standard error is not a terminal. This option forces it to do so.

-c, --cursor
    Use cursor positioning escape sequences instead of just using carriage returns. This is useful in conjunction with -N (name) if you are using multiple pv invocations in a single, long, pipeline.

DATA TRANSFER MODIFIERS

-L RATE, --rate-limit RATE
    Limit the transfer to a maximum of RATE bytes per second. A suffix of "k", "m", "g", or "t" can be added to denote kilobytes (*1024), megabytes, and so on.

-B BYTES, --buffer-size BYTES
    Use a transfer buffer size of BYTES bytes. A suffix of "k", "m", "g", or "t" can be added to denote kilobytes (*1024), megabytes, and so on. The default buffer size is the block size of the input file's filesystem multiplied by 32 (512kb max), or 400kb if the block size cannot be determined.

-E, --skip-errors
    Ignore read errors by attempting to skip past the offending sections. The corresponding parts of the output will be null bytes. At first only a few bytes will be skipped, but if there are many errors in a row then the skips will move up to chunks of 512. This is intended to be similar to dd conv=sync,noerror but has not been as thoroughly tested.

    Specify -E twice to only report a read error once per file, instead of reporting each byte range skipped.

-S, --stop-at-size
    If a size was specified with -s, stop transferring data once that many bytes have been written, instead of continuing to the end of input.

-R PID, --remote PID
    If PID is an instance of pv that is already running, -R PID will cause that instance to act as though it had been given this instance's command line instead. For example, if pv -L 123k is running with process ID 9876, then running pv -R 9876 -L 321k will cause it to start using a rate limit of 321k instead of 123k. Note that some options cannot be changed while running, such as -c, -l, -f, -E, and -S.

GENERAL OPTIONS

-P FILE, --pidfile FILE
    Save the process ID of pv in FILE. The file will be truncated if it already exists, and will be removed when pv exits. While pv is running, it will contain a single number - the process ID of pv - followed by a newline.

-h, --help
    Print a usage message on standard output and exit successfully.

-V, --version
    Print version information on standard output and exit successfully.

FORMATTING
If the -F option is given, then the output format is determined by the given format string. Within that string, the following sequences can be used:

%p  Progress bar. Expands to fill the remaining space. Should only be specified once. Equivalent to -p.

%t  Elapsed time. Equivalent to -t.

%e  ETA. Equivalent to -e.

%r  Current data transfer rate. Equivalent to -r.

%a  Average data transfer rate. Equivalent to -a.

%b  Bytes transferred so far (or lines if -l was specified). Equivalent to -b.

%N  Name prefix given by -N. Padded to 9 characters with spaces, and suffixed with :.

%%  A single %.

The format string equivalent of turning on all display switches is `%N %b %t %r %a %p %e'.

EXIT STATUS
An exit status of 1 indicates a problem with the -R or -P options. Any other exit status is a bitmask of the following:

2   One or more files could not be accessed, stat(2)ed, or opened.

4   An input file was the same as the output file.

8   Internal error with closing a file or moving to the next file.

16  There was an error while transferring data from one or more input files.

32  A signal was caught that caused an early exit.

64  Memory allocation failed. A zero exit status indicates no problems.

AUTHORS
Andrew Wood <andrew.wood@ivarch.com>
http://www.ivarch.com/ Kevin Coyner <kcoyner@debian.org>
(Debian package maintainer) Jakub Hrozek <jhrozek@redhat.com>
(Fedora package maintainer) Cedric Delfosse <cedric@debian.org>
(previous Debian package maintainer) Eduardo Aguiar <eduardo.oliveira@sondabrasil.com.br>
(provided Portuguese [Brazilian] translation) Stephane Lacasse <stephane@gorfou.ca>
(provided French translation)
http://gorfou.ca/ Marcos Kreinacke <public@kreinacke.com>
(provided German translation) Bartosz Fenski <fenio@o2.pl>
(provided Polish translation, along with Krystian Zubel)
http://skawina.eu.org/ Joshua Jensen
(reported RPM installation bug) Boris Folgmann
(reported cursor handling bug)
http://www.folgmann.com/en/ Mathias Gumz
(reported NLS bug) Daniel Roethlisberger
(submitted patch to use lockfiles for -c if terminal locking fails) Adam Buchbinder
(lots of help with a Cygwin port of -c) Mark Tomich
(suggested -B option)
http://metuchen.dyndns.org Gert Menke
(reported bug when piping to dd with a large input buffer size) Ville Herva <Ville.Herva@iki.fi>
(informative bug report about rate limiting performance) Elias Pipping
(patch to compile properly on Darwin 9; potential NULL deref report) Patrick Collison
(similar patch for OS X) Boris Lohner
(reported problem that -L does not complain if given non-numeric value) Sebastian Kayser
(supplied testing for SIGPIPE, demonstrated internationalisation problem) Laszlo Ersek
(reported shared memory leak on SIGINT with -c)
http://phptest11.atw.hu/ Phil Rutschman
(provided a patch for fully restoring terminal state on exit)
http://bandgap.rsnsoft.com/ Henry Precheur
(reporting and suggestions for --rate-limit bug when rate is under 10)
http://henry.precheur.org/ E. Rosten
(supplied patch for block buffering in line mode)
http://mi.eng.cam.ac.uk/~er258/ Kjetil Torgrim Homme
(reported compilation error with default CFLAGS on non-GCC compilers) Alexandre de Verteuil
(reported bug in OS X build and supplied test environment to fix in) Martin Baum
(supplied patch to return nonzero exit status if terminated by signal) Sam Nelson
(supplied patch to fix trailing slash on DESTDIR)
http://www.siliconfuture.net/ Daniel Pape
(reported Cygwin installation problem due to DESTDIR) Henry Gebhardt <hsggebhardt@googlemail.com>
(supplied patches to improve SI prefixes and add --average-rate) Vladimir Kokarev
Alexander Leo
(reported that exit status did not reflect file errors) Thomas Rachel
(submitted patches for IEEE1541 (MiB suffixes), 1+e03 bug) Guillaume Marcais
(submitted speedup patch for line mode) Moritz Barsnick
(submitted patch for compile warning in size calculation) Pawel Piatek
(submitted RPM and patches for AIX) Sami Liedes
(submitted patch for --timer and --bytes with --numeric) Steven Willis
(reported problem with "-R" killing non-PV remote processes) Vladimir Pal, Vladimir Ermakov
(submitted patch which led to development of --format option) Peter Samuelson <peter@p12n.org>
(submitted patch to calculate size if stdout is a block device) Miguel Diaz
(much Cygwin help (and packaging), found narrow-terminal bug) Jim Salter
(commissioned work on the --skip-errors option)
http://ubuntuwiki.net Wouter Pronk
(reported build problem on SCO) Bryan Dongray
(provided patches for test scripts failing on older Red Hats)
http://www.dongrays.com Zev Weiss
(provided patch to fix splice() not using stdin)
http://www.bewilderbeest.net

BUGS
Known bugs:

*   The -c option does not work properly on Cygwin without cygserver running, if started near the bottom of the screen (IPC is needed to handle the terminal scrolling). To fix this, start cygserver before using pv -c.

*   The -R option is not available on Cygwin without cygserver running (SYSV IPC is needed). To fix this, start cygserver before running the instance of pv you want, at runtime, to change the parameters of.

If you find any other bugs, please contact the primary author, either by email or by using the contact form on the web site.

SEE ALSO
cat(1), dialog(1)

LICENSE
This is free software, distributed under the ARTISTIC 2.0 license.