/* ircd-hybrid reference configuration file
 * Copyright (C) 2000-2014 Hybrid Development Team
 *
 * Written by ejb, wcampbel, db, leeh and others
 *
 * $Id: reference.conf 2731 2014-01-01 14:13:47Z michael $
 */

/*
 * ########################################################################
 * IMPORTANT NOTE:
 *
 * auth {} blocks MUST be specified in order of precedence.  The first one
 * that matches a user will be used.  So place spoofs first, then specials,
 * then general access.
 * ########################################################################
 *
 * Shell style (#), C++ style (//) and C style comments are supported.
 *
 * Files may be included by either:
 *        .include "filename"
 *        .include <filename>
 *
 * Times/durations are written as:
 *        12 hours 30 minutes 1 second
 *        
 * Valid units of time:
 *        year, month, week, day, hour, minute, second
 *
 * Valid units of size:
 *        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
 *
 * Sizes and times may be singular or plural.
 */


/*
 * serverinfo {}:  contains information about the server
 */
serverinfo {
	/*
	 * name: the name of this server. This cannot be changed at runtime.
	 */
	name = "hades.arpa";

	/*
	 * sid: a server's unique ID. This is three characters long and must
	 * be in the form [0-9][A-Z0-9][A-Z0-9]. The first character must be
	 * a digit, followed by 2 alpha-numerical letters.
	 *
	 * NOTE: The letters must be capitalized. This cannot be changed at runtime.
	 */
	sid = "0HY";

	/*
	 * description: the description of the server.
	 */
	description = "ircd-hybrid test server";

	/*
	 * network info: the name and description of the network this server
	 * is on. Shown in the 005 reply and used with serverhiding.
	 */
	network_name = "MyNet";
	network_desc = "This is My Network";

	/*
	 * hub: allow this server to act as a hub and have multiple servers
	 * connected to it.
	 */
	hub = no;

	/*
	 * vhost: the IP to bind to when we connect outward to ipv4 servers.
	 * This should be an ipv4 IP only, or "*" for INADDR_ANY.
	 */
#	vhost = "192.169.0.1";

	/*
	 * vhost6: the address to bind to when we make outgoing connections
	 * to IPv6 servers. This should be an IPv6 address, or "*" for INADDR_ANY.
	 */
#	vhost6 = "3ffe:80e8:546::2";

	/* max_clients: the maximum number of clients allowed to connect. */
	max_clients = 512;

	/*
	 * max_nick_length: only applies to local clients. Must be in the
	 * range of 9 to 30. Default is 9 if nothing else is specified.
	 */
	max_nick_length = 9;

	/*
	 * max_topic_length: only applies to topics set by local clients.
	 * Must be in the range of 80 to 300. Default is 80 if nothing
	 * else is specified.
	 */
	max_topic_length = 160;

	/*
	 * rsa_private_key_file: the path to the file containing the
	 * RSA key for cryptlink.
	 *
	 * Example commands to store a 2048 bit RSA key in rsa.key:
	 *
	 *	openssl genrsa -out rsa.key 2048
	 *	chown <ircd-user>.<ircd.group> rsa.key
	 *	chmod 0600 rsa.key
	 */
#	rsa_private_key_file = "/etc/ircd-hybrid/rsa.key";

	/*
	 * ssl_certificate_file: the path to the file containing our
	 * SSL certificate for encrypted client connection.
	 *
	 * This assumes your private RSA key is stored in rsa.key. You
	 * MUST have an RSA key in order to generate the certificate.
	 *
	 * Example command:
	 *
	 *	openssl req -new -days 365 -x509 -key rsa.key -out cert.pem
	 *
	 * See http://www.openssl.org/docs/HOWTO/certificates.txt
	 *
	 * Please use the following values when generating the cert
	 *
	 *	Organization Name: Network Name
	 *	Organization Unit Name: changme.someirc.net
	 *	Common Name: irc.someirc.net
	 *	E-mail: you@domain.com
	 */
#	ssl_certificate_file = "/etc/ircd-hybrid/cert.pem";

	/*
	 * ssl_dh_param_file:
	 *
	 * Path to the PEM encoded Diffie-Hellman parameter file.
	 * DH parameters are required when using ciphers with EDH
	 * (ephemeral Diffie-Hellman) key exchange.
	 *
	 * A DH parameter file can be created by running:
	 *
	 *	openssl dhparam -out dhparam.pem 1024
	 *
	 * Prime size must be at least 1024 bits. Further information
	 * regarding specific OpenSSL dhparam command-line options
	 * can be found in the OpenSSL manual.
	 */
#	ssl_dh_param_file = "/etc/ircd-hybrid/dhparam.pem";

	/*
	 * ssl_cipher_list:
	 *
	 * List of ciphers to support on _this_ server. Can be used to
	 * enforce specific ciphers for incoming SSL/TLS connections.
	 * If a client (which also includes incoming server connections) is not
	 * capable of using any of the ciphers listed here, the connection will
	 * simply be rejected.
	 *
	 * A list of supported ciphers by OpenSSL can be obtained by running:
	 *
	 *	openssl ciphers -ssl3 -tls1 -v
	 *
	 * Multiple ciphers are separated by colons. The order of preference is
	 * from left to right.
	 */
#	ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";

	/*
	 * ssl_server_method:
	 * ssl_client_method:
	 *
	 * SSL/TLS methods we provide for incoming (server method) and
	 * outgoing (client method) SSL/TLS connections.
	 * This can be either sslv3 for SSLv3, and/or tlsv1 for TLSv1.
	 */
#	ssl_server_method = tlsv1, sslv3;
#	ssl_client_method = tlsv1;
};

/*
 * admin {}:  contains admin information about the server
 */
admin {
	name = "Smurf target";
	description = "Main Server Administrator";
	email = "<syn@packets.r.us>";
};

/*
 * class {}:  contains information about classes for users
 */
class {
	/* name: the name of the class. */
	name = "users";

	/*
	 * ping_time: how often a client must reply to a PING from the
	 * server before they are dropped.
	 */
	ping_time = 90 seconds;

	/*
	 * number_per_ip: how many local users are allowed to connect
	 * from a single IP address  (optional)
	 */
	number_per_ip = 2;

	/*
	 * max_local: how many local users are allowed to connect
	 * from a single ident@host  (optional)
	 */
	max_local = 2;

	/*
	 * max_global: network-wide limit of users per ident@host  (optional)
	 */
	max_global = 10;

	/*
	 * max_number: the maximum number of users allowed in this class (optional)
	 */
	max_number = 100;

	/*
	 * the following lines are optional and allow you to define
	 * how many users can connect from one /NN subnet.
	 */
	cidr_bitlen_ipv4 = 24;
	cidr_bitlen_ipv6 = 120;
	number_per_cidr = 16;

	/*
	 * sendq: the amount of data allowed in a client's send queue before
	 * they are dropped.
	 */
	sendq = 100 kbytes;

	/*
	 * recvq: the amount of data allowed in a client's receive queue before
	 * they are dropped for flooding. Defaults to 2560 if the chosen
	 * value isn't within the range of 512 to 8000.
	 */
	recvq = 2560 bytes;
};

class {
	name = "opers";
	ping_time = 90 seconds;
	number_per_ip = 10;
	max_number = 100;
	sendq = 100 kbytes;

	/*
	 * min_idle: minimum idle time that is shown in /whois.
	 */
	min_idle = 3 hours;

	/*
	 * max_idle: maximum idle time that is shown in /whois.
	 */
	max_idle = 8 hours;

	/*
	 * flags:
	 *
	 * random_idle          - a fake idle time is set randomly between
	 *                        min_idle and max_idle
	 * hide_idle_from_opers - the fake idle time will also be shown to operators
	 */
	flags = random_idle, hide_idle_from_opers;
};

class {
	name = "server";
	ping_time = 90 seconds;

	/*
	 * connectfreq: only used in server classes. Specifies the delay
	 * between autoconnecting to servers.
	 */
	connectfreq = 5 minutes;

	/* max number: the number of servers to autoconnect to. */
	max_number = 1;

	/* sendq: servers need a higher sendq as they send more data. */
	sendq = 2 megabytes;
};

/*
 * motd {}: Allows the display of a different MOTD to a client
 * depending on its origin. Applies to local users only.
 */
motd {
	/*
	 * mask: multiple mask entries are permitted. Mask can either be
	 * a class name or a hostname.
	 */
	mask = "*.at";
	mask = "*.de";
	mask = "*.ch";

	/*
	 * file: path to the actual motd file.
	 */
	file = "/usr/local/ircd/etc/german.motd";
};

/*
 * listen {}:  contains information about the ports ircd listens on
 */
listen {
	/*
	 * port: the port to listen on. If no host is specified
	 * earlier in the listen {} block, it will listen on all available IPs.
	 *
	 * Ports are separated by commas; a range may be specified using ".."
	 */

	/* port: listen on all available IP addresses, ports 6665 to 6669 */
	port = 6665 .. 6669;

	/*
	 * Listen on 192.168.0.1/6697 with SSL enabled and hidden from STATS P
	 * unless you are an administrator.
	 *
	 * NOTE: The "flags" directive always has to come before "port".
	 *
	 * Currently available flags are:
	 *
	 *  ssl    - Port may only accept TLS/SSL connections
	 *  server - Only server connections are permitted
	 *  hidden - Port is hidden from /stats P, unless you're an admin
	 */
	flags = hidden, ssl;
	host = "192.168.0.1";
	port = 6697;

	/*
	 * host: set a specific IP address/host to listen on using the
	 * subsequent port definitions. This may be IPv4 or IPv6.
	 */
	host = "1.2.3.4";
	port = 7000, 7001;

	host = "3ffe:1234:a:b:c::d";
	port = 7002;
};

/*
 * auth {}:  allow users to connect to the ircd
 */
auth {
	/*
	 * user: the user@host allowed to connect. Multiple user
	 * lines are permitted within each auth block.
	 */
	user = "*@172.16.0.0/12";
	user = "*test@123D:B567:*";

	/* password: an optional password that is required to use this block */
	password = "letmein";

	/*
	 * encrypted: controls whether the auth password above has been
	 * encrypted.
	 */
	encrypted = yes;

	/*
	 * spoof: fake the user's host to this. This is free-form, just do
	 * everyone a favor and don't abuse it. ('=' prefix on /stats I)
	 */
	spoof = "I.still.hate.packets";

	/* class: the class the user is placed in */
	class = "opers";

	/*
	 * need_password - don't allow users who haven't supplied the correct
	 *                 password to connect using another auth{} block
	 *                 ('&' prefix on /stats I if disabled)
	 * need_ident    - require the user to have identd to connect ('+' prefix on /stats I)
	 * spoof_notice  - enable spoofing notification to admins
	 * exceed_limit  - allow a user to exceed class limits ('>' prefix on /stats I)
	 * kline_exempt  - exempt this user from k/glines ('^' prefix on /stats I)
	 * gline_exempt  - exempt this user from glines ('_' prefix on /stats I)
	 * resv_exempt   - exempt this user from resvs ('$' prefix on /stats I)
	 * no_tilde      - remove ~ from a user with no ident ('-' prefix on /stats I)
	 * can_flood     - allow this user to exceed flood limits ('|' prefix on /stats I)
	 * webirc        - enables WEBIRC authentication for web-based clients such as Mibbit
	 *                 ('<' prefix on /stats I)
	 */
	flags = need_password, spoof_notice, exceed_limit, kline_exempt,
		gline_exempt, resv_exempt, no_tilde, can_flood;
};

auth {
	/*
	 * redirect: the server and port to redirect a user to. A user does not
	 * have to obey the redirection; the ircd just suggests an alternative
	 * server for them.
	 */
	redirserv = "this.is.not.a.real.server";
	redirport = 6667;

	user = "*.server";

	/* class: a class is required even though it is not used */
	class = "users";
};

auth {
	user = "*@*";
	class = "users";
	flags = need_ident;
};

/*
 * operator {}:  defines ircd operators
 */
operator {
	/* name: the name of the oper */
	name = "sheep";

	/*
	 * user: the user@host required for this operator. Multiple
	 * user="" lines are supported.
	 */
	user = "*sheep@192.168.0.0/16";
	user = "*@127.0.0.0/8";

	/*
	 * password: the password required to oper. By default this will
	 * need to be encrypted by using the provided mkpasswd tool.
	 * Several password hash algorithms are available depending
	 * on your system's crypt() implementation. For example, a modern
	 * glibc already has support for the SHA-256/512 and MD5 encryption
	 * algorithms.
	 */
	password = "$5$x5zof8qe.Yc7/bPp$5zIg1Le2Lsgd4CvOjaD20pr5PmcfD7ha/9b2.TaUyG4";

	/*
	 * encrypted: controls whether the oper password above has been
	 * encrypted.
	 */
	encrypted = yes;

	/*
	 * rsa_public_key_file: the public key for this oper when using Challenge.
	 * A password should not be defined when this is used; see 
	 * doc/challenge.txt for more information.
	 */
#	rsa_public_key_file = "/etc/ircd-hybrid/oper.pub";

	/*
	 * ssl_certificate_fingerprint: enhances security by additionally checking
	 * the oper's client certificate fingerprint against the specified
	 * fingerprint below.
	 *
	 * Hint: your users can use the following command to obtain a SHA-256 hash
	 * of their ssl certificate:
	 *
	 *	openssl x509 -sha256 -noout -fingerprint -in cert.pem | sed -e 's/^.*=//;s/://g'
	 */
#	ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";

	/*
	 * ssl_connection_required: client must be connected over SSL/TLS
	 * in order to be able to use this oper{} block.
	 * Default is 'no' if nothing else is specified.
	 */
	ssl_connection_required = no;

	/* class: the class the oper joins when they successfully /oper */
	class = "opers";

	/*
	 * umodes: the default usermodes opers get when they /oper. If defined,
	 * it will override oper_umodes settings in general {}.
	 * Available usermodes:
	 *
	 * +b - bots         - See bot and drone flooding notices
	 * +c - cconn        - Client connection/quit notices
	 * +D - deaf         - Don't receive channel messages
	 * +d - debug        - See debugging notices
	 * +e - external     - See remote server connection and split notices
	 * +F - farconnect   - Remote client connection/quit notices
	 * +f - full         - See auth{} block full notices
	 * +G - softcallerid - Server Side Ignore for users not on your channels
	 * +g - callerid     - Server Side Ignore (for privmsgs etc)
	 * +H - hidden       - Hides operator status to other users
	 * +i - invisible    - Not shown in NAMES or WHO unless you share a channel
	 * +j - rej          - See rejected client notices
	 * +k - skill        - See server generated KILL messages
	 * +l - locops       - See LOCOPS messages
	 * +n - nchange      - See client nick changes
	 * +R - nononreg     - Only receive private messages from registered clients
	 * +s - servnotice   - See general server notices
	 * +u - unauth       - See unauthorized client notices
	 * +w - wallop       - See server generated WALLOPS
	 * +y - spy          - See LINKS, STATS, TRACE notices etc.
	 * +z - operwall     - See oper generated WALLOPS
	 */
	umodes = locops, servnotice, operwall, wallop;

	/*
	 * privileges: controls the activities and commands an oper is
	 * allowed to do on the server. All options default to no.
	 * Available options:
	 *
	 * module         - allows MODULE
	 * connect        - allows local CONNECT              | ('P' flag)
	 * connect:remote - allows remote CONNECT             | ('Q' flag)
	 * squit          - allows local SQUIT                | ('R' flag)
	 * squit:remote   - allows remote SQUIT               | ('S' flag)
	 * kill           - allows to KILL local clients      | ('N' flag)
	 * kill:remote    - allows remote users to be /KILL'd | ('O' flag)
	 * remoteban      - allows remote KLINE/UNKLINE       | ('B' flag)
	 * dline          - allows DLINE                      |
	 * undline        - allows UNDLINE                    |
	 * kline          - allows KLINE                      | ('K' flag)
	 * unkline        - allows UNKLINE                    | ('U' flag)
	 * gline          - allows GLINE                      | ('G' flag)
	 * xline          - allows XLINE                      | ('X' flag)
	 * locops         - allows LOCOPS                     |
	 * globops        - allows GLOBOPS                    |
	 * wallops        - allows WALLOPS                    |
	 * operwall       - allows OPERWALL                   | ('L' flag)
	 * rehash         - allows oper to REHASH config      | ('H' flag)
	 * die            - allows DIE                        | ('D' flag)
	 * restart        - allows RESTART                    |
	 * set            - allows SET                        |
	 * admin          - gives administrator privileges    | ('A' flag)
	 */
	flags = kill, kill:remote, connect, connect:remote, kline, unkline,
		xline, globops, restart, die, rehash, admin, operwall, module;
};

/*
 * service {}: specifies a server which may act as a network service
 *
 * NOTE: it is very important that every server on the network
 *       has the same service{} block.
 */
service {
	name = "service.someserver";
	name = "stats.someserver";
};

/*
 * connect {}: define a server to connect to
 */
connect {
	/* name: the name of the server */
	name = "irc.uplink.com";

	/*
	 * host: the host or IP address to connect to. If a hostname is used it
	 * must match the reverse DNS of the server.
	 */
	host = "192.168.0.1";

	/*
	 * vhost: the IP address to bind to when making outgoing connections to
	 * servers.
	 * serverinfo::vhost and serverinfo::vhost6 will be overridden
	 * by this directive.
	 */
	vhost = "192.168.0.2";

	/*
	 * passwords: the passwords to send (OLD C:) and accept (OLD N:).
	 * The remote server will have these passwords swapped.
	 */
	send_password = "password";
	accept_password = "anotherpassword";

	/*
	 * encrypted: controls whether the accept_password above has been
	 * encrypted.
	 */
	encrypted = no;

	/* port: the port to connect to this server on */
	port = 6666;

	/*
	 * hub_mask: the mask of servers that this server may hub. Multiple
	 * entries are permitted.
	 */
	hub_mask = "*";

	/*
	 * leaf_mask: the mask of servers this server may not hub. Multiple
	 * entries are permitted. Useful for forbidding EU -> US -> EU routes.
	 */
#	leaf_mask = "*.uk";

	/* class: the class this server is in */
	class = "server";

	/*
	 * ssl_cipher_list:
	 *
	 * List of ciphers that the server we are connecting to must support.
	 * If the server is not capable of using any of the ciphers listed below,
	 * the connection will simply be rejected.
	 * Can be used to enforce stronger ciphers, even though this option
	 * is not necessarily required to establish a SSL/TLS connection.
	 *
	 * Multiple ciphers are separated by colons. The order of preference
	 * is from left to right.
	 */
#	ssl_cipher_list = "DHE-RSA-AES256-SHA:AES256-SHA";

	/*
	 * ssl_certificate_fingerprint: enhances security by additionally checking
	 * the server's client certificate fingerprint against the specified
	 * fingerprint below.
	 */
#	ssl_certificate_fingerprint = "4C62287BA6776A89CD4F8FF10A62FFB35E79319F51AF6C62C674984974FCCB1D";

	/*
	 * autoconn   - controls whether we autoconnect to this server or not,
	 *              dependent on class limits. By default, this is disabled.
	 * ssl        - Initiates a TLS/SSL connection.
	 */
#	flags = autoconn, ssl;
};

connect {
	name = "ipv6.some.server";
	host = "3ffd:dead:beef::1";
	send_password = "password";
	accept_password = "password";
	port = 6666;

	/*
	 * aftype: controls whether the connection uses "ipv4" or "ipv6".
	 * Default is ipv4.
	 */
	aftype = ipv6;
	class = "server";
};

/*
 * cluster {}:  servers that share klines/unkline/xline/unxline/resv/unresv/locops
 * automatically
 */
cluster {
	/*
	 * name: the server to share with; this can take wildcards
	 *
	 * NOTE: only local actions will be clustered, meaning that if
	 *       the server receives a shared kline/unkline/etc, it
	 *       will not be propagated to clustered servers.
	 *
	 *       Remote servers are not necessarily required to accept
	 *       clustered lines, they need a shared{} for *THIS* server
	 *       in order to accept them.
	 */
	name = "*.arpa";

	/*
	 * type: list of what to share; options are as follows:
	 *      dline   - share dlines
	 *      undline - share undlines
	 *      kline   - share klines
	 *      unkline - share unklines
	 *      xline   - share xlines
	 *      unxline - share unxlines
	 *      resv    - share resvs
	 *      unresv  - share unresvs
	 *      locops  - share locops
	 *      all     - share all of the above (default)
	 */
	type = kline, unkline, locops, xline, resv;
};

/*
 * shared {}: users that are allowed to remote kline
 *
 * NOTE: This can effectively be used for remote klines.
 *       Please note that there is no password authentication
 *       for users setting remote klines. You must also be
 *       /oper'd in order to issue a remote kline.
 */
shared {
	/*
	 * name: the server the user must be connected to in order to set klines.
	 * If this is not specified, the user will be allowed to kline from all
	 * servers.
	 */
	name = "irc2.some.server";

	/*
	 * user: the user@host mask that is allowed to set klines. If this is
	 * not specified, all users on the server above will be allowed to set
	 * a remote kline.
	 */
	user = "oper@my.host.is.spoofed";

	/*
	 * type: list of what to share, options are as follows:
	 *      dline   - allow oper/server to dline
	 *      undline - allow oper/server to undline
	 *      kline   - allow oper/server to kline
	 *      unkline - allow oper/server to unkline
	 *      xline   - allow oper/server to xline
	 *      unxline - allow oper/server to unxline
	 *      resv    - allow oper/server to resv
	 *      unresv  - allow oper/server to unresv
	 *      locops  - allow oper/server to locops - only used for servers that cluster
	 *      all     - allow oper/server to do all of the above (default)
	 */
	type = kline, unkline, resv;
};

/*
 * kill {}:  users that are not allowed to connect
 * Oper issued klines will be added to the specified kline config
 */
kill {
	user = "bad@*.hacked.edu";
	reason = "Obviously hacked account";
};

/*
 * deny {}:  IP addresses that are not allowed to connect
 * (before DNS/ident lookup)
 * Oper issued dlines will be added to the specified dline config
 */
deny {
	ip = "10.0.1.0/24";
	reason = "Reconnecting vhosted bots";
};

/*
 * exempt {}:  IP addresses that are exempt from deny {} and Dlines
 */
exempt {
	ip = "192.168.0.0/16";
};

/*
 * resv {}:  nicks and channels users may not use/join
 */
resv { mask = "clone*"; reason = "Clone bots"; };
resv { mask = "ChanServ"; reason = "Reserved for services"; };
resv { mask = "NickServ"; reason = "Reserved for services"; };
resv { mask = "OperServ"; reason = "Reserved for services"; };
resv { mask = "MemoServ"; reason = "Reserved for services"; };
resv { mask = "BotServ"; reason = "Reserved for services"; };
resv { mask = "HelpServ"; reason = "Reserved for services"; };
resv { mask = "HostServ"; reason = "Reserved for services"; };
resv { mask = "StatServ"; reason = "Reserved for services"; };
resv { mask = "#*services*"; reason = "Reserved for services"; };

resv {
	/*
	 * mask: masks starting with a '#' are automatically considered
	 * as channel name masks.
	 */
	mask = "#helsinki";
	reason = "Channel is reserved for finnish inhabitants";

	/*
	 * exempt: can be either a ISO 3166 alpha-2 two letter country
	 * code, or a nick!user@host mask. CIDR is supported. Exempt
	 * entries can be stacked.
	 */
	exempt = "FI";
};

/*
 * gecos {}:  Used for banning users based on their "realname".
 */
gecos {
	name = "*sex*";
	reason = "Possible spambot";
};

gecos {
	name = "sub7server";
	reason = "Trojan drone";
};

/*
 * channel {}:  The channel block contains options pertaining to channels
 */
channel {
	/*
	 * disable_fake_channels: this option, if set to 'yes', will
	 * disallow clients from creating or joining channels that have one
	 * of the following ASCII characters in their name:
	 *
	 *   2 | bold
	 *   3 | mirc color
	 *  15 | plain text
	 *  22 | reverse
	 *  29 | italic
	 *  31 | underline
	 * 160 | non-breaking space
	 */
	disable_fake_channels = yes;

	/*
	 * knock_delay: The amount of time a user must wait between issuing
	 * the knock command.
	 */
	knock_delay = 5 minutes;

	/*
	 * knock_delay_channel: How often a knock to any specific channel
	 * is permitted, regardless of the user sending the knock.
	 */
	knock_delay_channel = 1 minute;

	/*
	 * max_chans_per_user: The maximum number of channels a user can
	 * join/be on.
	 */
	max_chans_per_user = 25;

	/*
	 * max_chans_per_oper: The maximum number of channels an oper can
	 * join/be on.
	 */
	max_chans_per_oper = 50;

	/* max_bans: maximum number of +b/e/I modes in a channel */
	max_bans = 100;

	/*
	 * how many joins in how many seconds constitute a flood. Use 0 to
	 * disable. +b opers will be notified (changeable via /set)
	 */
	join_flood_count = 16;
	join_flood_time = 8 seconds;

	/*
	 * The ircd will now check splitmode (whether a server is split from
	 * the network) every few seconds; this functionality is known as
	 * splitcode and is influenced by the options below.
	 *
	 * Either split users or split servers can activate splitmode, but
	 * both conditions must be met for the ircd to deactivate splitmode.
	 *
	 * You may force splitmode to be permanent by /quote set splitmode on
	 */

	/*
	 * default_split_user_count: when the usercount is lower than this level,
	 * consider ourselves split. This must be set for automatic splitmode.
	 */
	default_split_user_count = 0;

	/*
	 * default_split_server_count: when the servercount is lower than this,
	 * consider ourselves split. This must be set for automatic splitmode.
	 */
	default_split_server_count = 0;

	/* no_create_on_split: do not allow users to create channels on split. */
	no_create_on_split = yes;

	/* no_join_on_split: do not allow users to join channels on a split. */
	no_join_on_split = no;
};

/*
 * serverhide {}:  The serverhide block contains the options regarding
 * to server hiding
 */
serverhide {
	/*
	 * disable_remote_commands: disable users issuing commands
	 * on remote servers.
	 */
	disable_remote_commands = no;

	/*
	 * flatten_links: this option will show all servers in /links appear
	 * as though they are linked to this current server.
	 */
	flatten_links = no;

	/*
	 * links_delay: how often to update the links file when it is
	 * flattened.
	 */
	links_delay = 5 minutes;

	/*
	 * hidden: hide this server from a /links output on servers that
	 * support it. This allows hub servers to be hidden etc.
	 */
	hidden = no;

	/*
	 * hide_servers: hide remote servernames everywhere and instead use
	 * hidden_name and network_desc.
	 */
	hide_servers = no;

	/*
	 * hide_services: define this if you want to hide the location of
	 * services servers that are specified in the service{} block.
	 */
	hide_services = no;

	/*
	 * Use this as the servername users see if hide_servers = yes.
	 */
	hidden_name = "*.hidden.com";

	/*
	 * hide_server_ips: If this is disabled, opers will be unable to see
	 * servers' IP addresses and will be shown a masked IP address; admins
	 * will be shown the real IP address.
	 *
	 * If this is enabled, nobody can see a server's IP address.
	 * *This is a kludge*: it has the side effect of hiding the IP addresses
	 * everywhere, including logfiles.
	 *
	 * We recommend you leave this disabled, and just take care with who you
	 * give administrator privileges to.
	 */
	hide_server_ips = no;
};

/*
 * general {}:  The general block contains many of the options that were once
 * compiled in options in config.h
 */
general {
	/*
	 * cycle_on_host_change: sends a fake QUIT/JOIN combination
	 * when services change the hostname of a specific client.
	 */
	cycle_on_host_change = yes;

	/* services_name: servername of nick/channel services */
	services_name = "service.someserver";

	/* max_watch: maximum WATCH entries a client can have. */
	max_watch = 60;

	/* gline_enable: enable glines (network-wide temporary klines). */
	gline_enable = yes;

	/*
	 * gline_duration: the amount of time a gline will remain on your
	 * server before expiring.
	 */
	gline_duration = 1 day;

	/*
	 * gline_request_duration: how long a pending G-line can be around.
	 * 10 minutes should be plenty.
	 */
	gline_request_duration = 10 minutes;

	/*
	 * gline_min_cidr: the minimum required length of a CIDR bitmask
	 * for IPv4 based glines.
	 */
	gline_min_cidr = 16;

	/*
	 * gline_min_cidr6: the minimum required length of a CIDR bitmask
	 * for IPv6 based glines.
	 */
	gline_min_cidr6 = 48;

	/*
	 * Whether to automatically set mode +i on connecting users.
	 */
	invisible_on_connect = yes;

	/*
	 * kill_chase_time_limit: KILL chasing is a feature whereby a KILL
	 * issued for a user who has recently changed nickname will be applied
	 * automatically to the new nick. kill_chase_time_limit is the maximum
	 * time following a nickname change that this chasing will apply.
	 */
	kill_chase_time_limit = 90 seconds;

	/*
	 * hide_spoof_ips: if disabled, opers will be allowed to see the real
	 * IP address of spoofed users in /trace etc. If this is defined they
	 * will be shown a masked IP.
	 */
	hide_spoof_ips = yes;

	/*
	 * Ignore bogus timestamps from other servers. Yes, this will desync the
	 * network, but it will allow chanops to resync with a valid non TS 0
	 *
	 * This should be enabled network wide, or not at all.
	 */
	ignore_bogus_ts = no;

	/*
	 * disable_auth: completely disable ident lookups; if you enable this,
	 * be careful of what you set need_ident to in your auth {} blocks
	 */
	disable_auth = no;

	/*
	 * tkline_expire_notices: enables or disables temporary kline/xline
	 * expire notices.
	 */
	tkline_expire_notices = no;

	/*
	 * default_floodcount: the default value of floodcount that is configurable
	 * via /quote set floodcount. This is the number of lines a user
	 * may send to any other user/channel in one second.
	 */
	default_floodcount = 10;

	/*
	 * failed_oper_notice: send a notice to all opers on the server when
	 * someone tries to OPER and uses the wrong password, host or ident.
	 */
	failed_oper_notice = yes;

	/*
	 * dots_in_ident: the number of '.' characters permitted in an ident
	 * reply before the user is rejected.
	 */
	dots_in_ident = 2;

	/*
	 * min_nonwildcard: the minimum number of non-wildcard characters in
	 * k/d/g lines placed via the server. K-lines hand-placed are exempt from
	 * this limit.
	 * Wildcard chars: '.', ':', '*', '?', '@', '!'
	 */
	min_nonwildcard = 4;

	/*
	 * min_nonwildcard_simple: the minimum number of non-wildcard characters
	 * in gecos bans. Wildcard chars: '*', '?'
	 */
	min_nonwildcard_simple = 3;

	/* max_accept: maximum allowed /accept's for +g usermode. */
	max_accept = 20;

	/* anti_nick_flood: enable the nickflood control code. */
	anti_nick_flood = yes;

	/* nick flood: the number of nick changes allowed in the specified period */
	max_nick_time = 20 seconds;
	max_nick_changes = 5;

	/*
	 * anti_spam_exit_message_time: the minimum time a user must be connected
	 * before custom quit messages are allowed.
	 */
	anti_spam_exit_message_time = 5 minutes;

	/*
	 * ts delta: the time delta allowed between server clocks before
	 * a warning is given, or before the link is dropped. All servers
	 * should run ntpdate/rdate to keep clocks in sync
	 */
	ts_warn_delta = 30 seconds;
	ts_max_delta = 5 minutes;

	/*
	 * warn_no_nline: warn opers about servers that try to connect but
	 * for which we don't have a connect {} block. Twits with misconfigured
	 * servers can become really annoying with this enabled.
	 */
	warn_no_nline = yes;

	/*
	 * stats_e_disabled: set this to 'yes' to disable "STATS e" for both
	 * operators and administrators. Doing so is a good idea in case
	 * there are any exempted (exempt{}) server IPs you don't want to
	 * see leaked.
	 */
	stats_e_disabled = no;

	/* stats_o_oper only: make stats o (opers) oper only */
	stats_o_oper_only = yes;

	/* stats_P_oper_only: make stats P (ports) oper only */
	stats_P_oper_only = yes;

	/* stats_u_oper_only: make stats u (uptime) oper only */
	stats_u_oper_only = no;

	/*
	 * stats i oper only: make stats i (auth {}) oper only. Set to:
	 *     yes    - show users no auth blocks, made oper only.
	 *     masked - show users the first matching auth block
	 *     no     - show users all auth blocks.
	 */
	stats_i_oper_only = yes;

	/*
	 * stats_k_oper_only: make stats k/K (klines) oper only. Set to:
	 *     yes    - show users no auth blocks, made oper only
	 *     masked - show users the first matching auth block
	 *     no     - show users all auth blocks.
	 */
	stats_k_oper_only = yes;

	/*
	 * caller_id_wait: time between notifying a +g user that somebody
	 * is messaging them.
	 */
	caller_id_wait = 1 minute;

	/*
	 * opers_bypass_callerid: allows operators to bypass +g and message
	 * anyone who has it set (useful if you use services).
	 */
	opers_bypass_callerid = no;

	/*
	 * pace_wait_simple: minimum time required between use of less
	 * intensive commands
	 * (ADMIN, HELP, (L)USERS, VERSION, remote WHOIS)
	 */
	pace_wait_simple = 1 second;

	/*
	 * pace_wait: minimum time required between use of more intensive commands
	 * (AWAY, INFO, LINKS, MAP, MOTD, STATS, WHO, wildcard WHOIS, WHOWAS)
	 */
	pace_wait = 10 seconds;

	/*
	 * short_motd: send clients a notice telling them to read the MOTD
	 * instead of forcing an MOTD to clients who may simply ignore it.
	 */
	short_motd = no;

	/*
	 * ping_cookie: require clients to respond exactly to a ping command,
	 * can help block certain types of drones and FTP PASV mode spoofing.
	 */
	ping_cookie = no;

	/* no_oper_flood: increase flood limits for opers. */
	no_oper_flood = yes;

	/*
	 * true_no_oper_flood: completely eliminate flood limits for opers
	 * and for clients with can_flood = yes in their auth {} blocks.
	 */
	true_no_oper_flood = yes;

	/* oper_pass_resv: allow opers to over-ride RESVs on nicks/channels. */
	oper_pass_resv = yes;

	/* REMOVE ME. The following line checks that you have been reading. */
	havent_read_conf = 1;

	/*
	 * max_targets: the maximum number of targets in a single
	 * PRIVMSG/NOTICE. Set to 999 NOT 0 for unlimited.
	 */
	max_targets = 4;

	/*
	 * usermodes configurable: a list of usermodes for the options below
	 *
	 * +b - bots         - See bot and drone flooding notices
	 * +c - cconn        - Client connection/quit notices
	 * +D - deaf         - Don't receive channel messages
	 * +d - debug        - See debugging notices
	 * +e - external     - See remote server connection and split notices
	 * +F - farconnect   - Remote client connection/quit notices
	 * +f - full         - See auth{} block full notices
	 * +G - softcallerid - Server Side Ignore for users not on your channels
	 * +g - callerid     - Server Side Ignore (for privmsgs etc)
	 * +H - hidden       - Hides operator status to other users
	 * +i - invisible    - Not shown in NAMES or WHO unless you share a channel
	 * +j - rej          - See rejected client notices
	 * +k - skill        - See server generated KILL messages
	 * +l - locops       - See LOCOPS messages
	 * +n - nchange      - See client nick changes
	 * +R - nononreg     - Only receive private messages from registered clients
	 * +s - servnotice   - See general server notices
	 * +u - unauth       - See unauthorized client notices
	 * +w - wallop       - See server generated WALLOPS
	 * +y - spy          - See LINKS, STATS, TRACE notices etc.
	 * +z - operwall     - See oper generated WALLOPS
	 */

	/* oper_only_umodes: usermodes only opers may set */
	oper_only_umodes = bots, cconn, debug, full, hidden, skill,
                           nchange, rej, spy, external, operwall,
                           locops, unauth, farconnect;

	/* oper_umodes: default usermodes opers get when they /oper */
	oper_umodes = bots, locops, servnotice, operwall, wallop;

	/*
	 * use_egd: if your system does not have *random devices yet you
	 * want to use OpenSSL and encrypted links, enable this. Beware -
	 * EGD is *very* CPU intensive when gathering data for its pool.
	 */
#	use_egd = yes;

	/*
	 * egdpool_path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
	 * which automatically finds the path.
	 */
#	egdpool_path = "/var/run/egd-pool";

	/*
	 * throttle_time: the minimum amount of time required between
	 * connections from the same IP address. exempt {} blocks are excluded
	 * from this throttling.
	 * Offers protection against flooders who reconnect quickly.
	 * Set to 0 to disable.
	 */
	throttle_time = 10;
};

modules {
	/*
	 * path: other paths to search for modules specified below
	 * and in "/module load".
	 */
	path = "/usr/local/lib/ircd-hybrid/modules";
	path = "/usr/local/lib/ircd-hybrid/modules/autoload";

	/* module: the name of a module to load on startup/rehash. */
#	module = "some_module.la";
};

/*
 * log {}:  contains information about logfiles.
 */
log {
	/* Do you want to enable logging to ircd.log? */
	use_logging = yes;

	file {
		type = oper;
		name = "/usr/local/ircd/var/log/oper.log";
		size = unlimited;
	};

	file {
		type = user;
		name = "/usr/local/ircd/var/log/user.log";
		size = 50 megabytes;
	};

	file {
		type = kill;
		name = "/usr/local/ircd/var/log/kill.log";
		size = 50 megabytes;
	};

	file {
		type = kline;
		name = "/usr/local/ircd/var/log/kline.log";
		size = 50 megabytes;
	};

	file {
		type = dline;
		name = "/usr/local/ircd/var/log/dline.log";
		size = 50 megabytes;
	};

	file {
		type = gline;
		name = "/usr/local/ircd/var/log/gline.log";
		size = 50 megabytes;
	};

	file {
		type = xline;
		name = "/usr/local/ircd/var/log/xline.log";
		size = 50 megabytes;
	};

	file {
		type = resv;
		name = "/usr/local/ircd/var/log/resv.log";
		size = 50 megabytes;
	};

	file {
		type = debug;
		name = "/usr/local/ircd/var/log/debug.log";
		size = 50 megabytes;
	};
};
