GstAdapter

## GstAdapter GstAdapter — adapts incoming data on a sink pad into chunks of N bytes |

## Synopsis

    #include <gst/base/gstadapter.h>

    struct              GstAdapter;
    GstAdapter *        gst_adapter_new                     (void);
    void                gst_adapter_clear                   (GstAdapter *adapter);
    void                gst_adapter_push                    (GstAdapter *adapter,
                                                             GstBuffer *buf);
    const guint8 *      gst_adapter_peek                    (GstAdapter *adapter,
                                                             guint size);
    void                gst_adapter_copy                    (GstAdapter *adapter,
                                                             guint8 *dest,
                                                             guint offset,
                                                             guint size);
    void                gst_adapter_flush                   (GstAdapter *adapter,
                                                             guint flush);
    guint               gst_adapter_available               (GstAdapter *adapter);
    guint               gst_adapter_available_fast          (GstAdapter *adapter);
    guint8 *            gst_adapter_take                    (GstAdapter *adapter,
                                                             guint nbytes);
    GstBuffer *         gst_adapter_take_buffer             (GstAdapter *adapter,
                                                             guint nbytes);
    GList *             gst_adapter_take_list               (GstAdapter *adapter,
                                                             guint nbytes);
    GstClockTime        gst_adapter_prev_timestamp          (GstAdapter *adapter,
                                                             guint64 *distance);
    guint               gst_adapter_masked_scan_uint32      (GstAdapter *adapter,
                                                             guint32 mask,
                                                             guint32 pattern,
                                                             guint offset,
                                                             guint size);
    guint               gst_adapter_masked_scan_uint32_peek (GstAdapter *adapter,
                                                             guint32 mask,
                                                             guint32 pattern,
                                                             guint offset,
                                                             guint size,
                                                             guint32 *value);

## Object Hierarchy

      GObject
       +----GstAdapter

## Description

This class is for elements that receive buffers in an undesired size. While for example raw video contains one image per buffer, the same is not true for a lot of other formats, especially those that come directly from a file. So if you have undefined buffer sizes and require a specific size, this object is for you.

An adapter is created with `gst_adapter_new()`. It can be freed again with `g_object_unref()`.

The theory of operation is like this: All buffers received are put into the adapter using `gst_adapter_push()` and the data is then read back in chunks of the desired size using `gst_adapter_peek()`. After the data is processed, it is freed using `gst_adapter_flush()`.

Other methods such as `gst_adapter_take()` and `gst_adapter_take_buffer()` combine `gst_adapter_peek()` and `gst_adapter_flush()` in one method and are potentially more convenient for some use cases.

For example, a sink pad's chain function that needs to pass data to a library in 512-byte chunks could be implemented like this:

    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    21
    22
    23
    static GstFlowReturn
    sink_pad_chain (GstPad *pad, GstBuffer *buffer)
    {
      MyElement *this;
      GstAdapter *adapter;
      GstFlowReturn ret = GST_FLOW_OK;

      // will give the element an extra ref; remember to drop it
      this = MY_ELEMENT (gst_pad_get_parent (pad));
      adapter = this->adapter;

      // put buffer into adapter
      gst_adapter_push (adapter, buffer);
      // while we can read out 512 bytes, process them
      while (gst_adapter_available (adapter) >= 512 && ret == GST_FLOW_OK) {
        // use flowreturn as an error value
        ret = my_library_foo (gst_adapter_peek (adapter, 512));
        gst_adapter_flush (adapter, 512);
      }

      gst_object_unref (this);
      return ret;
    }

For another example, a simple element inside GStreamer that uses GstAdapter is the libvisual element.

An element using GstAdapter in its sink pad chain function should ensure that when the FLUSH_STOP event is received, that any queued data is cleared using `gst_adapter_clear()`. Data should also be cleared or processed on EOS and when changing state from GST_STATE_PAUSED to GST_STATE_READY.

Also check the GST_BUFFER_FLAG_DISCONT flag on the buffer. Some elements might need to clear the adapter after a discontinuity.

Since 0.10.24, the adapter will keep track of the timestamps of the buffers that were pushed. The last seen timestamp before the current position can be queried with `gst_adapter_prev_timestamp()`. This function can optionally return the amount of bytes between the start of the buffer that carried the timestamp and the current adapter position. The distance is useful when dealing with, for example, raw audio samples because it allows you to calculate the timestamp of the current adapter position by using the last seen timestamp and the amount of bytes since.

A last thing to note is that while GstAdapter is pretty optimized, merging buffers still might be an operation that requires a `malloc()` and `memcpy()` operation, and these operations are not the fastest. Because of this, some functions like `gst_adapter_available_fast()` are provided to help speed up such cases should you want to. To avoid repeated memory allocations, `gst_adapter_copy()` can be used to copy data into a (statically allocated) user provided buffer.

GstAdapter is not MT safe. All operations on an adapter must be serialized by the caller. This is not normally a problem, however, as the normal use case of GstAdapter is inside one pad's chain function, in which case access is serialized via the pad's STREAM_LOCK.

Note that `gst_adapter_push()` takes ownership of the buffer passed. Use `gst_buffer_ref()` before pushing it into the adapter if you still want to access the buffer later. The adapter will never modify the data in the buffer pushed in it.

Last reviewed on 2009-05-13 (0.10.24).

## Details

### struct GstAdapter

    struct GstAdapter;

The opaque GstAdapter data structure.

### gst_adapter_new ()

    GstAdapter *        gst_adapter_new                     (void);

Creates a new GstAdapter. Free with `g_object_unref()`.

Returns : | a new GstAdapter. [transfer full]

### gst_adapter_clear ()

    void                gst_adapter_clear                   (GstAdapter *adapter);

Removes all buffers from `adapter`.

`adapter` : | a GstAdapter

### gst_adapter_push ()

    void                gst_adapter_push                    (GstAdapter *adapter,
                                                             GstBuffer *buf);

Adds the data from `buf` to the data stored inside `adapter` and takes ownership of the buffer.

`adapter` : | a GstAdapter
`buf` : | a GstBuffer to add to queue in the adapter. [transfer full]

### gst_adapter_peek ()

    const guint8 *      gst_adapter_peek                    (GstAdapter *adapter,
                                                             guint size);

Gets the first `size` bytes stored in the `adapter`. The returned pointer is valid until the next function is called on the adapter.

Note that setting the returned pointer as the data of a GstBuffer is incorrect for general-purpose plugins. The reason is that if a downstream element stores the buffer so that it has access to it outside of the bounds of its chain function, the buffer will have an invalid data pointer after your element flushes the bytes. In that case you should use `gst_adapter_take()`, which returns a freshly-allocated buffer that you can set as GstBuffer malloc_data or the potentially more performant `gst_adapter_take_buffer()`.

Returns NULL if `size` bytes are not available.

`adapter` : | a GstAdapter
`size` : | the number of bytes to peek
Returns : | a pointer to the first `size` bytes of data, or NULL. [transfer none][array length=size]

### gst_adapter_copy ()

    void                gst_adapter_copy                    (GstAdapter *adapter,
                                                             guint8 *dest,
                                                             guint offset,
                                                             guint size);

Copies `size` bytes of data starting at `offset` out of the buffers contained in `GstAdapter` into an array `dest` provided by the caller.

The array `dest` should be large enough to contain `size` bytes. The user should check that the adapter has (`offset` + `size`) bytes available before calling this function.

`adapter` : | a GstAdapter
`dest` : | the memory to copy into. [out caller-allocates][array length=size]
`offset` : | the bytes offset in the adapter to start from
`size` : | the number of bytes to copy

Since 0.10.12

### gst_adapter_flush ()

    void                gst_adapter_flush                   (GstAdapter *adapter,
                                                             guint flush);

Flushes the first `flush` bytes in the `adapter`. The caller must ensure that at least this many bytes are available.

See also: `gst_adapter_peek()`.

`adapter` : | a GstAdapter
`flush` : | the number of bytes to flush

### gst_adapter_available ()

    guint               gst_adapter_available               (GstAdapter *adapter);

Gets the maximum amount of bytes available, that is it returns the maximum value that can be supplied to `gst_adapter_peek()` without that function returning NULL.

`adapter` : | a GstAdapter
Returns : | number of bytes available in `adapter`

### gst_adapter_available_fast ()

    guint               gst_adapter_available_fast          (GstAdapter *adapter);

Gets the maximum number of bytes that are immediately available without requiring any expensive operations (like copying the data into a temporary buffer).

`adapter` : | a GstAdapter
Returns : | number of bytes that are available in `adapter` without expensive operations

### gst_adapter_take ()

    guint8 *            gst_adapter_take                    (GstAdapter *adapter,
                                                             guint nbytes);

Returns a freshly allocated buffer containing the first `nbytes` bytes of the `adapter`. The returned bytes will be flushed from the adapter.

Caller owns returned value. g_free after usage.

Free-function: g_free

`adapter` : | a GstAdapter
`nbytes` : | the number of bytes to take
Returns : | oven-fresh hot data, or NULL if `nbytes` bytes are not available. [transfer full][array length=nbytes]

### gst_adapter_take_buffer ()

    GstBuffer *         gst_adapter_take_buffer             (GstAdapter *adapter,
                                                             guint nbytes);

Returns a GstBuffer containing the first `nbytes` bytes of the `adapter`. The returned bytes will be flushed from the adapter. This function is potentially more performant than `gst_adapter_take()` since it can reuse the memory in pushed buffers by subbuffering or merging.

Caller owns returned value. `gst_buffer_unref()` after usage.

Free-function: gst_buffer_unref

`adapter` : | a GstAdapter
`nbytes` : | the number of bytes to take
Returns : | a GstBuffer containing the first `nbytes` of the adapter, or NULL if `nbytes` bytes are not available. [transfer full]

Since 0.10.6

### gst_adapter_take_list ()

    GList *             gst_adapter_take_list               (GstAdapter *adapter,
                                                             guint nbytes);

Returns a GList of buffers containing the first `nbytes` bytes of the `adapter`. The returned bytes will be flushed from the adapter. When the caller can deal with individual buffers, this function is more performant because no memory should be copied.

Caller owns returned list and contained buffers. `gst_buffer_unref()` each buffer in the list before freeing the list after usage.

`adapter` : | a GstAdapter
`nbytes` : | the number of bytes to take
Returns : | a GList of buffers containing the first `nbytes` of the adapter, or NULL if `nbytes` bytes are not available. [element-type Gst.Buffer][transfer full]

Since 0.10.31

### gst_adapter_prev_timestamp ()

    GstClockTime        gst_adapter_prev_timestamp          (GstAdapter *adapter,
                                                             guint64 *distance);

Get the timestamp that was before the current byte in the adapter. When `distance` is given, the amount of bytes between the timestamp and the current position is returned.

The timestamp is reset to GST_CLOCK_TIME_NONE and the distance is set to 0 when the adapter is first created or when it is cleared. This also means that before the first byte with a timestamp is removed from the adapter, the timestamp and distance returned are GST_CLOCK_TIME_NONE and 0 respectively.

`adapter` : | a GstAdapter
`distance` : | pointer to location for distance, or NULL. [out][allow-none]
Returns : | The previously seen timestamp.

Since 0.10.24

### gst_adapter_masked_scan_uint32 ()

    guint               gst_adapter_masked_scan_uint32      (GstAdapter *adapter,
                                                             guint32 mask,
                                                             guint32 pattern,
                                                             guint offset,
                                                             guint size);

Scan for pattern `pattern` with applied mask `mask` in the adapter data, starting from offset `offset`.

The bytes in `pattern` and `mask` are interpreted left-to-right, regardless of endianness. All four bytes of the pattern must be present in the adapter for it to match, even if the first or last bytes are masked out.

It is an error to call this function without making sure that there is enough data (offset+size bytes) in the adapter.

This function calls `gst_adapter_masked_scan_uint32_peek()` passing NULL for value.

`adapter` : | a GstAdapter
`mask` : | mask to apply to data before matching against `pattern`
`pattern` : | pattern to match (after mask is applied)
`offset` : | offset into the adapter data from which to start scanning, returns the last scanned position.
`size` : | number of bytes to scan from offset
Returns : | offset of the first match, or -1 if no match was found. Example:
    // Assume the adapter contains 0x00 0x01 0x02 ... 0xfe 0xff
    gst_adapter_masked_scan_uint32 (adapter, 0xffffffff, 0x00010203, 0, 256);
    // -> returns 0
    gst_adapter_masked_scan_uint32 (adapter, 0xffffffff, 0x00010203, 1, 255);
    // -> returns -1
    gst_adapter_masked_scan_uint32 (adapter, 0xffffffff, 0x01020304, 1, 255);
    // -> returns 1
    gst_adapter_masked_scan_uint32 (adapter, 0xffff, 0x0001, 0, 256);
    // -> returns -1
    gst_adapter_masked_scan_uint32 (adapter, 0xffff, 0x0203, 0, 256);
    // -> returns 0
    gst_adapter_masked_scan_uint32 (adapter, 0xffff0000, 0x02030000, 0, 256);
    // -> returns 2
    gst_adapter_masked_scan_uint32 (adapter, 0xffff0000, 0x02030000, 0, 4);
    // -> returns -1

Since 0.10.24

### gst_adapter_masked_scan_uint32_peek ()

    guint               gst_adapter_masked_scan_uint32_peek (GstAdapter *adapter,
                                                             guint32 mask,
                                                             guint32 pattern,
                                                             guint offset,
                                                             guint size,
                                                             guint32 *value);

Scan for pattern `pattern` with applied mask `mask` in the adapter data, starting from offset `offset`. If a match is found, the value that matched is returned through `value`, otherwise `value` is left untouched.

The bytes in `pattern` and `mask` are interpreted left-to-right, regardless of endianness. All four bytes of the pattern must be present in the adapter for it to match, even if the first or last bytes are masked out.

It is an error to call this function without making sure that there is enough data (offset+size bytes) in the adapter.

`adapter` : | a GstAdapter
`mask` : | mask to apply to data before matching against `pattern`
`pattern` : | pattern to match (after mask is applied)
`offset` : | offset into the adapter data from which to start scanning, returns the last scanned position.
`size` : | number of bytes to scan from offset
`value` : | pointer to uint32 to return matching data
Returns : | offset of the first match, or -1 if no match was found.

Since 0.10.30