stunnel - universal SSL tunnel stunnel [<filename>] | -fd n | -help | -version | -sockets stunnel [ [-install | -uninstall | -start | -stop] [-quiet] [<filename>] ] | -help | -version | -sockets The stunnel program is designed to work as SSL encryption wrapper between remote clients and local (inetd-startable) or remote servers. The concept is that having non-SSL aware daemons running on your system you can easily set them up to communicate with clients over secure SSL channels. stunnel can be used to add SSL functionality to commonly used Inetd daemons like POP-2, POP-3, and IMAP servers, to standalone daemons like NNTP, SMTP and HTTP, and in tunneling PPP over network sockets without changes to the source code. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) Use specified configuration file Read the config file from specified file descriptor Print stunnel help menu Print stunnel version and compile time defaults Print default socket options Install NT Service Uninstall NT Service Start NT Service Stop NT Service Don't display a message box when successfully installed or uninstalled NT service Each line of the configuration file can be either: an empty line (ignored) a comment starting with ';' (ignored) an 'option_name = option_value' pair '[service_name]' indicating a start of a service definition

GLOBAL OPTIONS
directory to chroot stunnel process chroot keeps stunnel in chrooted jail. CApath, CRLpath, pid and exec are located inside the jail and the patches have to be relative to the directory specified with chroot. To have libwrap (TCP Wrappers) control effective in a chrooted environment you also have to copy its configuration files (/etc/hosts.allow and /etc/hosts.deny) there. select data compression algorithm default: no compression debugging level Level is a one of the syslog level names or numbers emerg (0), alert (1), crit (2), err (3), warning (4), notice (5), info (6), or debug (7). All logs for the specified level and all levels numerically less than it will be shown. Use debug = debug or debug = 7 for greatest debugging output. The default is notice (5). The syslog facility 'daemon' will be used unless a facility name is supplied. (Facilities are not supported on Win32.) Case is ignored for both facilities and levels. path to Entropy Gathering Daemon socket Entropy Gathering Daemon socket to use to feed OpenSSL random number generator. (Available only if compiled with OpenSSL 0.9.5a or higher) select hardware engine default: software-only cryptography There's an example in 'EXAMPLES' section. control hardware engine Special commands "LOAD" and "INIT" can be used to load and initialize the engine cryptogaphic module. foreground mode Stay in foreground (don't fork) and log to stderr instead of via syslog (unless output is specified). default: background in daemon mode append log messages to a file instead of using syslog /dev/stdout device can be used to redirect log messages to the standard output (for example to log them with daemontools splogger). pid file location If the argument is empty, then no pid file will be created. pid path is relative to chroot directory if specified. bytes to read from random seed files Number of bytes of data read from random seed files. With SSL versions less than 0.9.5a, also determines how many bytes of data are considered sufficient to seed the PRNG. More recent OpenSSL versions have a builtin function to determine when sufficient randomness is available. path to file with random seed data The SSL library will use data from this file first to seed the random number generator. overwrite the random seed files with new random data default: yes use specified string as the service name On Unix: inetd mode service name for TCP Wrapper library. On NT/2000/XP: NT service name in the Control Panel. default: stunnel setgid() to groupname in daemon mode and clears all other groups setuid() to username in daemon mode Set an option on accept/local/remote socket The values for linger option are l_onof:l_linger. The values for time are tv_sec:tv_usec. Examples: socket = l:SO_LINGER=1:60 set one minute timeout for closing local socket socket = r:TCP_NODELAY=1 turn off the Nagle algorithm for remote sockets socket = r:SO_OOBINLINE=1 place out-of-band data directly into the receive data stream for remote sockets socket = a:SO_REUSEADDR=0 disable address reuse (enabled by default) socket = a:SO_BINDTODEVICE=lo only accept connections on loopback interface enable the taskbar icon default: yes

SERVICE-LEVEL OPTIONS
Each configuration section begins with service name in square brackets. The service name is used for libwrap (TCP Wrappers) access control and lets you distinguish stunnel services in your log files. Note that if you wish to run stunnel in inetd mode (where it is provided a network socket by a server such as inetd, xinetd, or tcpserver) then you should read the section entitled INETD MODE below. accept connections on specified host:port If no host specified, defaults to all IP addresses for the local host. Certificate Authority directory This is the directory in which stunnel will look for certificates when using the verify. Note that the certificates in this directory should be named XXXXXXXX.0 where XXXXXXXX is the hash value of the DER encoded subject of the cert (the first 4 bytes of the MD5 hash in least significant byte order). CApath path is relative to chroot directory if specified. Certificate Authority file This file contains multiple CA certificates, used with the verify. certificate chain PEM file name A PEM is always needed in server mode. Specifying this flag in client mode will use this certificate chain as a client side certificate chain. Using client side certs is optional. The certificates must be in PEM format and must be sorted starting with the certificate to the highest level (root CA). Select permitted SSL ciphers A colon delimited list of the ciphers to allow in the SSL connection. For example DES-CBC3-SHA:IDEA-CBC-MD5 client mode (remote service uses SSL) default: no (server mode) connect to remote host:port If no host specified, defaults to localhost. Certificate Revocation Lists directory This is the directory in which stunnel will look for CRLs when using the verify. Note that the CRLs in this directory should be named XXXXXXXX.0 where XXXXXXXX is the hash value of the CRL. CRLpath path is relative to chroot directory if specified. Certificate Revocation Lists file This file contains multiple CRLs, used with the verify. delay DNS lookup for 'connect' option select engine number to read private key The engines are numbered starting from 1. execute local inetd-type program exec path is relative to chroot directory if specified. arguments for exec including program name ($0) Quoting is currently not supported. Arguments are separated with arbitrary number of whitespaces. use IDENT (RFC 1413) username checking private key for certificate specified with cert option Private key is needed to authenticate certificate owner. Since this file should be kept secret it should only be readable to its owner. On Unix systems you can use the following command: chmod 600 keyfile default: value of cert option IP of the outgoing interface is used as source for remote connections. Use this option to bind a static local IP address, instead. select OCSP server for certificate verification specify OCSP server flag Several OCSPflag can be used to specify multiple flags. currently supported flags: NOCERTS, NOINTERN NOSIGS, NOCHAIN, NOVERIFY, NOEXPLICIT, NOCASIGN, NODELEGATED, NOCHECKS, TRUSTOTHER, RESPID_KEY, NOTIME OpenSSL library options The parameter is the OpenSSL option name as described in the SSL_CTX_set_options(3ssl) manual, but without SSL_OP_ prefix. Several options can be used to specify multiple options. For example for compatibility with erroneous Eudora SSL implementation the following option can be used: options = DONT_INSERT_EMPTY_FRAGMENTS application protocol to negotiate SSL currently supported: cifs, connect, imap, nntp, pop3, smtp authentication type for protocol negotiations currently supported: basic, NTLM Currently authentication type only applies to 'connect' protocol. default: basic destination address for protocol negotiations password for protocol negotiations username for protocol negotiations allocate pseudo terminal for 'exec' option reconnect a connect+exec section after it's disconnected default: no session cache timeout select version of SSL protocol Allowed options: all, SSLv2, SSLv3, TLSv1 time to wait for expected data time to wait for close_notify (set to 0 for buggy MSIE) time to wait to connect a remote host time to keep an idle connection transparent proxy mode Re-write address to appear as if wrapped daemon is connecting from the SSL client machine instead of the machine running stunnel. This option is only available in local mode (exec option) by LD_PRELOADing env.so shared library or in remote mode (connect option) on Linux 2.2 kernel compiled with transparent proxy option and then only in server mode. Note that this option will not combine with proxy mode (connect) unless the client's default route to the target machine lies through the host running stunnel, which cannot be localhost. verify peer certificate level 1 - verify peer certificate if present level 2 - verify peer certificate level 3 - verify peer with locally installed certificate default - no verify stunnel returns zero on success, non-zero on error. In order to provide SSL encapsulation to your local imapd service, use [imapd] accept = 993 exec = /usr/sbin/imapd execargs = imapd If you want to provide tunneling to your pppd daemon on port 2020, use something like [vpn] accept = 2020 exec = /usr/sbin/pppd execargs = pppd local pty = yes If you want to use stunnel in inetd mode to launch your imapd process, you'd use this stunnel.conf. Note there must be no [service_name] section. exec = /usr/sbin/imapd execargs = imapd Here is an example of advanced engine configuration to read private key from an OpenSC engine engine=dynamic engineCtrl=SO_PATH:/usr/lib/opensc/engine_pkcs11.so engineCtrl=ID:pkcs11 engineCtrl=LIST_ADD:1 engineCtrl=LOAD engineCtrl=MODULE_PATH:/usr/lib/pkcs11/opensc-pkcs11.so engineCtrl=INIT [service] engineNum=1 key=id_45 stunnel configuration file stunnel certificate and private key Option execargs does not support quoting. stunnel cannot be used for the FTP daemon because of the nature of the FTP protocol which utilizes multiple ports for data transfers. There are available SSL enabled versions of FTP and telnet daemons, however.

INETD MODE
The most common use of stunnel is to listen on a network port and establish communication with either a new port via the connect option, or a new program via the exec option. However there is a special case when you wish to have some other program accept incoming connections and launch stunnel, for example with inetd, xinetd, or tcpserver. For example, if you have the following line in inetd.conf: imaps stream tcp nowait root /usr/sbin/stunnel stunnel /etc/stunnel/imaps.conf In these cases, the inetd-style program is responsible for binding a network socket (imaps above) and handing it to stunnel when a connection is received. Thus you do not want stunnel to have any accept option. All the Service Level Options should be placed in the global options section, and no [service_name] section will be present. See the EXAMPLES section for example configurations.

CERTIFICATES
Each SSL enabled daemon needs to present a valid X.509 certificate to the peer. It also needs a private key to decrypt the incoming data. The easiest way to obtain a certificate and a key is to generate them with the free OpenSSL package. You can find more information on certificates generation on pages listed below. The order of contents of the .pem file is important. It should contain the unencrypted private key first, then a signed certificate (not certificate request). There should be also empty lines after certificate and private key. Plaintext certificate information appended on the top of generated certificate should be discarded. So the file should look like this: -----BEGIN RSA PRIVATE KEY----- [encoded key] -----END RSA PRIVATE KEY----- [empty line] -----BEGIN CERTIFICATE----- [encoded certificate] -----END CERTIFICATE----- [empty line]

RANDOMNESS
stunnel needs to seed the PRNG (pseudo random number generator) in order for SSL to use good randomness. The following sources are loaded in order until sufficient random data has been gathered: The file specified with the RNDfile flag. The file specified by the RANDFILE environment variable, if set. The file .rnd in your home directory, if RANDFILE not set. The file specified with '--with-random' at compile time. The contents of the screen if running on Windows. The egd socket specified with the EGD flag. The egd socket specified with '--with-egd-sock' at compile time. The /dev/urandom device. With recent (>=OpenSSL 0.9.5a) version of SSL it will stop loading random data automatically when sufficient entropy has been gathered. With previous versions it will continue to gather from all the above sources since no SSL function exists to tell when enough data is available. Note that on Windows machines that do not have console user interaction (mouse movements, creating windows, etc) the screen contents are not variable enough to be sufficient, and you should provide a random file for use with the RNDfile flag. Note that the file specified with the RNDfile flag should contain random data -- that means it should contain different information each time stunnel is run. This is handled automatically unless the RNDoverwrite flag is used. If you wish to update this file manually, the openssl rand command in recent versions of OpenSSL, would be useful. One important note -- if /dev/urandom is available, OpenSSL has a habit of seeding the PRNG with it even when checking the random state, so on systems with /dev/urandom you're likely to use it even though it's listed at the very bottom of the list above. This isn't stunnel's behaviour, it's OpenSSLs. access control facility for internet services internet 'super-server' stunnel homepage stunnel Frequently Asked Questions OpenSSL project website <Michal.Trojnara@mirt.net>