Config::IniFiles - A module for reading .ini-style configuration files. use Config::IniFiles; my $cfg = new Config::IniFiles( -file => "/path/configfile.ini" ); print "The value is " . $cfg->val( 'Section', 'Parameter' ) . "." if $cfg->val( 'Section', 'Parameter' ); Config::IniFiles provides a way to have readable configuration files outside your Perl script. Configurations can be imported (inherited, stacked,...), sections can be grouped, and settings can be accessed from a tied hash. INI files consist of a number of sections, each preceded with the section name in square brackets. The first non-blank character of the line indicating a section must be a left bracket and the last non-blank character of a line indicating a section must be a right bracket. The characters making up the section name can be any symbols at all. However section names must be unique. Parameters are specified in each section as Name=Value. Any spaces around the equals sign will be ignored, and the value extends to the end of the line. Parameter names are localized to the namespace of the section, but must be unique within a section. [section] Parameter=Value Both the hash mark (#) and the semicolon (;) are comment characters. by default (this can be changed by configuration) Lines that begin with either of these characters will be ignored. Any amount of whitespace may precede the comment character. Multi-line or multi-valued parameters may also be defined ala UNIX "here document" syntax: Parameter=<<EOT value/line 1 value/line 2 EOT You may use any string you want in place of "EOT". Note that what follows the "<<" and what appears at the end of the text MUST match exactly, including any trailing whitespace. As a configuration option (default is off), continuation lines can be allowed: [Section] Parameter=this parameter \ spreads across \ a few lines Get a new Config::IniFiles object with the new method: $cfg = Config::IniFiles->new( -file => "/path/configfile.ini" ); $cfg = new Config::IniFiles -file => "/path/configfile.ini"; Optional named parameters may be specified after the configuration file name. See the new in the METHODS section, below. Values from the config file are fetched with the val method: $value = $cfg->val('Section', 'Parameter'); If you want a multi-line/value field returned as an array, just specify an array as the receiver: @values = $cfg->val('Section', 'Parameter');

new ( [-option=>value ...] )
Returns a new configuration object (or "undef" if the configuration file has an error). One Config::IniFiles object is required per configuration file. The following named parameters are available: Specifies a file to load the parameters from. This 'file' may actually be any of the following things: 1) a simple filehandle, such as STDIN 2) a filehandle glob, such as *CONFIG 3) a reference to a glob, such as \*CONFIG 4) an IO::File object 5) the pathname of a file If this option is not specified, (i.e. you are creating a config file from scratch) you must specify a target file using SetFileName in order to save the parameters. Specifies a section to be used for default values. For example, if you look up the "permissions" parameter in the "users" section, but there is none, Config::IniFiles will look to your default section for a "permissions" value before returning undef. Set -reloadwarn => 1 to enable a warning message (output to STDERR) whenever the config file is reloaded. The reload message is of the form: PID <PID> reloading config file <file> at YYYY.MM.DD HH:MM:SS Default behavior is to not warn (i.e. -reloadwarn => 0). Set -nocase => 1 to handle the config file in a case-insensitive manner (case in values is preserved, however). By default, config files are case-sensitive (i.e., a section named 'Test' is not the same as a section named 'test'). Note that there is an added overhead for turning off case sensitivity. Set -allowcontinue => 1 to enable continuation lines in the config file. i.e. if a line ends with a backslash "\", then the following line is appended to the parameter value, dropping the backslash and the newline character(s). Default behavior is to keep a trailing backslash "\" as a parameter value. Note that continuation cannot be mixed with the "here" value syntax. This allows you to import or inherit existing setting from another Config::IniFiles object. When importing settings from another object, sections with the same name will be merged and parameters that are defined in both the imported object and the -file will take the value of given in the -file. If a -default section is also given on this call, and it does not coincide with the default of the imported object, the new default section will be used instead. If no -default section is given, then the default of the imported object will be used. The default comment character is "#". You may change this by specifying this option to an arbitrary character, except alphanumeric characters and square brackets and the "equal" sign. Allowed default comment characters are "#" and ";". By specifying this option you may enlarge or narrow this range to a set of characters (concatenating them to a string). Note that the character specified by -commentchar (see above) is always part of the allowed comment characters. Note: The given string is evaluated as a character class (i.e.: like "/[chars]/"). Set -allowcode => 1 allows to use perl hooks within a ini configuration file. Such perl hooks enable you to call a perl sub or to access an environment variable from within an ini file to set a parameter: [EXAMPLE] logfile1=sub{ $ENV{'LOGFILE'}; } logfile2=sub{ logfile(); } heredoc=<<EOT sub{ $ENV{'LOGFILE'}; } sub{ logfile(); } <<EOT Default behaviour is to allow perl code.

setval ($section, $parameter, $value, [ $value2, ... ])
Sets the value of parameter $parameter in section $section to $value (or to a set of values). See below for methods to write the new configuration back out to a file. You may not set a parameter that didn't exist in the original configuration file. setval will return undef if this is attempted. See newval below to do this. Otherwise, it returns 1.

newval($section, $parameter, $value [, $value2, ...])
Assignes a new value, $value (or set of values) to the parameter $parameter in section $section in the configuration file.

delval($section, $parameter)
Deletes the specified parameter from the configuration file

ReadConfig
Forces the configuration file to be re-read. Returns undef if the file can not be opened, no filename was defined (with the "-file" option) when the object was constructed, or an error occurred while reading. If an error occurs while parsing the INI file the @Config::IniFiles::errors array will contain messages that might help you figure out where the problem is in the file.

Sections
Returns an array containing section names in the configuration file. If the nocase option was turned on when the config object was created, the section names will be returned in lowercase.

SectionExists ( $sect_name )
Returns 1 if the specified section exists in the INI file, 0 otherwise (undefined if section_name is not defined).

AddSection ( $sect_name )
Ensures that the named section exists in the INI file. If the section already exists, nothing is done. In this case, the "new" section will possibly contain data already. If you really need to have a new section with no parameters in it, check that the name that you're adding isn't in the list of sections already.

DeleteSection ( $sect_name )
Completely removes the entire section from the configuration.

Parameters ($sect_name)
Returns an array containing the parameters contained in the specified section.

Groups
Returns an array containing the names of available groups. Groups are specified in the config file as new sections of the form [GroupName MemberName] This is useful for building up lists. Note that parameters within a "member" section are referenced normally (i.e., the section name is still "Groupname Membername", including the space) - the concept of Groups is to aid people building more complex configuration files.

SetGroupMember ( $sect )
Makes sure that the specified section is a member of the appropriate group. Only intended for use in newval.

RemoveGroupMember ( $sect )
Makes sure that the specified section is no longer a member of the appropriate group. Only intended for use in DeleteSection.

GroupMembers ($group)
Returns an array containing the members of specified $group. Each element of the array is a section name. For example, given the sections [Group Element 1] ... [Group Element 2] ... GroupMembers would return ("Group Element 1", "Group Element 2").

SetWriteMode ($mode)
Sets the mode (permissions) to use when writing the INI file. $mode must be a string representation of the octal mode.

GetWriteMode ($mode)
Gets the current mode (permissions) to use when writing the INI file. $mode is a string representation of the octal mode.

WriteConfig ($filename)
Writes out a new copy of the configuration file. A temporary file (ending in '-new') is written out and then renamed to the specified filename. Also see BUGS below. Returns true on success, "undef" on failure.

RewriteConfig
Same as WriteConfig, but specifies that the original configuration file should be rewritten.

GetFileName
Returns the filename associated with this INI file. If no filename has been specified, returns undef.

SetFileName ($filename)
If you created the Config::IniFiles object without initialising from a file, or if you just want to change the name of the file to use for ReadConfig/RewriteConfig from now on, use this method. Returns $filename if that was a valid name, undef otherwise.

SetSectionComment($section, @comment)
Sets the comment for section $section to the lines contained in @comment. Each comment line will be prepended with the comment charcter (default is "#") if it doesn't already have a comment character (ie: if the line does not start with whitespace followed by an allowed comment character, default is "#" and ";"). To clear a section comment, use DeleteSectionComment ($section)

GetSectionComment ($section)
Returns a list of lines, being the comment attached to section $section. In scalar context, returns a string containing the lines of the comment separated by newlines. The lines are presented as-is, with whatever comment character was originally used on that line.

DeleteSectionComment ($section)
Removes the comment for the specified section.

SetParameterComment ($section, $parameter, @comment)
Sets the comment attached to a particular parameter. Any line of @comment that does not have a comment character will be prepended with one. See "SetSectionComment($section, @comment)" above

GetParameterComment ($section, $parameter)
Gets the comment attached to a parameter.

DeleteParameterComment ($section, $parmeter)
Deletes the comment attached to a parameter.

GetParameterEOT ($section, $parameter)
Accessor method for the EOT text (in fact, style) of the specified parameter. If any text is used as an EOT mark, this will be returned. If the parameter was not recorded using HERE style multiple lines, GetParameterEOT returns undef.

SetParameterEOT ($section, $EOT)
Accessor method for the EOT text for the specified parameter. Sets the HERE style marker text to the value $EOT. Once the EOT text is set, that parameter will be saved in HERE style. To un-set the EOT text, use DeleteParameterEOT ($section, $parameter).

DeleteParameterEOT ($section, $parmeter)
Removes the EOT marker for the given section and parameter. When writing a configuration file, if no EOT marker is defined then "EOT" is used.

Delete
Deletes the entire configuration file in memory.

tie %ini, 'Config::IniFiles', (-file=>$filename, [-option=>value ...] )
Using "tie", you can tie a hash to a Config::IniFiles object. This creates a new object which you can access through your hash, so you use this instead of the new method. This actually creates a hash of hashes to access the values in the INI file. The options you provide through "tie" are the same as given for the new method, above. Here's an example: use Config::IniFiles; my %ini tie %ini, 'Config::IniFiles', ( -file => "/path/configfile.ini" ); print "We have $ini{Section}{Parameter}." if $ini{Section}{Parameter}; Accessing and using the hash works just like accessing a regular hash and many of the object methods are made available through the hash interface. For those methods that do not coincide with the hash paradigm, you can use the Perl "tied" function to get at the underlying object tied to the hash and call methods on that object. For example, to write the hash out to a new ini file, you would do something like this: tied( %ini )->WriteConfig( "/newpath/newconfig.ini" ) || die "Could not write settings to new file.";

$val = $ini{$section}{$parameter}
Returns the value of $parameter in $section. Because of limitations in Perl's tie implementation, multiline values accessed through a hash will always be returned as a single value with each line joined by the default line separator ($\). To break them apart you can simple do this: @lines = split( "$\", $ini{section}{multi_line_parameter} );

$ini{$section}{$parameter} = $value;
Sets the value of $parameter in $section to $value. To set a multiline or multiv-alue parameter just assign an array reference to the hash entry, like this: $ini{$section}{$parameter} = [$value1, $value2, ...]; If the parameter did not exist in the original file, it will be created. However, Perl does not seem to extend autovivification to tied hashes. That means that if you try to say $ini{new_section}{new_paramters} = $val; and the section 'new_section' does not exist, then Perl won't properly create it. In order to work around this you will need to create a hash reference in that section and then assign the parameter value. Something like this should do nicely: $ini{new_section} = {}; $ini{new_section}{new_paramters} = $val;

%hash = %{$ini{$section}}
Using the tie interface, you can copy whole sections of the ini file into another hash. Note that this makes a copy of the entire section. The new hash in no longer tied to the ini file, In particular, this means -default and -nocase settings will not apply to %hash.

$ini{$section} = {}; %{$ini{$section}} = %parameters;
Through the hash interface, you have the ability to replace the entire section with a new set of parameters. This call will fail, however, if the argument passed in NOT a hash reference. You must use both lines, as shown above so that Perl recognizes the section as a hash reference context before COPYing over the values from your %parameters hash.

delete $ini{$section}{$parameter}
When tied to a hash, you can use the Perl "delete" function to completely remove a parameter from a section.

delete $ini{$section}
The tied interface also allows you to delete an entire section from the ini file using the Perl "delete" function.

%ini = ();
If you really want to delete all the items in the ini file, this will do it. Of course, the changes won't be written to the actual file unless you call RewriteConfig on the object tied to the hash.

Parameter names
When tied to a hash, you use the Perl "keys" and "each" functions to iteratively list the parameters ("keys") or parameters and their values ("each") in a given section. You can also use the Perl "exists" function to see if a parameter is defined in a given section. Note that none of these will return parameter names that are part if the default section (if set), although accessing an unknown parameter in the specified section will return a value from the default section if there is one.

Section names
When tied to a hash, you use the Perl "keys" and "each" functions to iteratively list the sections in the ini file. You can also use the Perl "exists" function to see if a section is defined in the file.

@Config::IniFiles::errors
Contains a list of errors encountered while parsing the configuration file. If the new method returns undef, check the value of this to find out what's wrong. This value is reset each time a config file is read. The output from [Re]WriteConfig/OutputConfig might not be as pretty as it can be. Comments are tied to whatever was immediately below them. And case is not preserved for Section and Parameter names if the -nocase option was used. No locking is done by [Re]WriteConfig. When writing servers, take care that only the parent ever calls this, and consider making your own backup. Note that this is only a reference for the package maintainers - one of the upcoming revisions to this package will include a total clean up of the data structure. $iniconf->{cf} = "config_file_name" ->{startup_settings} = \%orginal_object_parameters ->{firstload} = 0 ->{nocase} = 0 ->{reloadwarn} = 0 ->{sects} = \@sections ->{sCMT}{$sect} = \@comment_lines ->{group}{$group} = \@group_members ->{parms}{$sect} = \@section_parms ->{EOT}{$sect}{$parm} = "end of text string" ->{pCMT}{$sect}{$parm} = \@comment_lines ->{v}{$sect}{$parm} = $value OR \@values The original code was written by Scott Hutton. Then handled for a time by Rich Bowen (thanks!), It is now managed by Jeremy Wadsack, with many contributions from various other people. In particular, special thanks go to (in roughly chronological order): Bernie Cosell, Alan Young, Alex Satrapa, Mike Blazer, Wilbert van de Pieterman, Steve Campbell, Robert Konigsberg, Scott Dellinger, R. Bernstein, Daniel Winkelmann, Pires Claudio, Adrian Phillips, Marek Rouchal, Luc St Louis, Adam Fischler, Kay Röpke, Matt Wilson, Raviraj Murdeshwar and Slaven Rezic, Florian Pfaff Geez, that's a lot of people. And apologies to the folks who were missed. If you want someone to bug about this, that would be: Jeremy Wadsack <dgsupport at wadsack-allen dot com> If you want more information, or want to participate, go to: http://sourceforge.net/projects/config-inifiles/ Please send bug reports to config-inifiles-bugs@lists.sourceforge.net Development discussion occurs on the mailing list config-inifiles-dev@lists.sourceforge.net, which you can subscribe to by going to the project web site (link above). This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. $Log: IniFiles.pm,v $ Revision 2.38 2003/05/14 01:30:32 wadg - fixed RewriteConfig and ReadConfig to work with open file handles - added a test to ensure that blank files throw no warnings - added a test for error messages from malformed lines Revision 2.37 2003/01/31 23:00:35 wadg Updated t/07misc test 4 to remove warning Revision 2.36 2002/12/18 01:43:11 wadg - Improved error message when an invalid line is encountered in INI file - Fixed bug 649220; importing a non-file-based object into a file one no longer destroys the original object Revision 2.33 2002/11/12 14:48:16 grail Addresses feature request - [ 403496 ] A simple change will allow support on more platforms Revision 2.32 2002/11/12 14:15:44 grail Addresses bug - [225971] Respect Read-Only Permissions of File System Revision 2.31 2002/10/29 01:45:47 grail [ 540867 ] Add GetFileName method Revision 2.30 2002/10/15 18:51:07 wadg Patched to stopwarnings about utf8 usage. Revision 2.29 2002/08/15 21:33:58 wadg - Support for UTF Byte-Order-Mark (Raviraj Murdeshwar) - Made tests portable to Mac (p. kent) - Made file parsing portable for s390/EBCDIC, etc. (Adam Fischler) - Fixed import bug with Perl 5.8.0 (Marek Rouchal) - Fixed precedence bug in WriteConfig (Luc St Louis) - Fixed broken group detection in SetGroupMember and RemoveGroupMember (Kay Röpke) - Added line continuation character (/) support (Marek Rouchal) - Added configurable comment character support (Marek Rouchal) Revision 2.28 2002/07/04 03:56:05 grail Changes for resolving bug 447532 - _section::FETCH should return array ref for multiline values. Revision 2.27 2001/12/20 16:03:49 wadg - Fixed bug introduced in new valid file check where ';' comments in first lines were not considered valid - Rearranged some tests to put them in the proper files (case and -default) - Added more comment test to cover more cases - Fixed first two comments tests which weren't doing anything Revision 2.26 2001/12/19 22:20:50 wadg #481513 Recognize badly formatted files Revision 2.25 2001/12/12 20:44:48 wadg Update to bring CVS version in synch Revision 2.24 2001/12/07 10:03:06 wadg 222444 Ability to load from arbitrary source Revision 2.23 2001/12/07 09:35:06 wadg Forgot to include updates t/test.ini Revision 2.22 2001/12/06 16:52:39 wadg Fixed bugs 482353,233372. Updated doc for new mgr. Revision 2.21 2001/08/14 01:49:06 wadg Bug fix: multiple blank lines counted as one Patched README change log to include recent updates Revision 2.20 2001/06/07 02:49:52 grail - Added checks for method parameters being defined - fixed some regexes to make them stricter - Fixed greps to make them consistent through the code (also a vain attempt to help my editors do syntax colouring properly) - Added AddSection method, replaced chunk of ReadConfig with AddSection - Added case handling stuff to more methods - Added RemoveGroupMember - Made variable names more consistent through OO methods - Restored Unix EOLs Revision 2.19 2001/04/04 23:33:40 wadg Fixed case sensitivity bug Revision 2.18 2001/03/30 04:41:08 rbowen Small documentation change in IniFiles.pm - pod2* was choking on misplaces =item tags. And I regenerated the README The main reason for this release is that the MANIFEST in the 2.17 version was missing one of the new test suite files, and that is included in this re-release. Revision 2.17 2001/03/21 21:05:12 wadg Documentation edits Revision 2.16 2001/03/21 19:59:09 wadg 410327 -default not in original; 233255 substring parameters Revision 2.15 2001/01/30 11:46:48 rbowen Very minor documentation bug fixed. Revision 2.14 2001/01/08 18:02:32 wadg [Bug #127325] Fixed proken import; changelog; moved Revision 2.13 2000/12/18 07:14:41 wadg [Bugs# 122441,122437] Alien EOLs and OO delete method Revision 2.12 2000/12/18 04:59:37 wadg [Bug #125524] Writing multiline of 2 with tied hash Revision 2.11 2000/12/16 12:53:13 grail [BUG #122455] Problem with File Permissions Revision 2.10 2000/12/13 17:40:18 rbowen Updated version number so that CPAN will stop being angry with us. Revision 1.18 2000/12/08 00:45:35 grail Change as requested by Jeremy Wadsack, for Bug 123146 Revision 1.17 2000/12/07 15:32:36 grail Further patch to duplicate sections bug, and replacement of repeated values handling code. Revision 1.14 2000/11/29 11:26:03 grail Updates for task 22401 (no more reloadsig) and 22402 (Group and GroupMember doco) Revision 1.13 2000/11/28 12:41:42 grail Added test for being able to add sections with wierd names like section|version2 Revision 1.11 2000/11/24 21:20:11 rbowen Resolved SourceForge bug #122445 - a parameter should be split from its value on the first = sign encountered, not on the last one. Added test suite to test this, and put test case in test.ini Revision 1.10 2000/11/24 20:40:58 rbowen Updated MANIFEST to have file list of new files in t/ Updated IniFiles.pm to have mention of sourceforge addresses, rather than rcbowen.com addresses Regenerated README from IniFiles.pm Revision 1.9 2000/11/23 05:08:08 grail Fixed documentation for bug 122443 - Check that INI files can be created from scratch. Revision 1.1.1.1 2000/11/10 03:04:01 rbowen Initial checkin of the Config::IniFiles source to SourceForge Revision 1.8 2000/10/17 01:52:55 rbowen Patch from Jeremy. Fixed "defined" warnings. Revision 1.7 2000/09/21 11:19:17 rbowen Mostly documentation changes. I moved the change log into the POD rather than having it in a separate Changes file. This allows people to see the changes in the Readme before they download the module. Now I just need to make sure I remember to regenerate the Readme every time I do a commit. 1.6 September 19, 2000 by JW, AS * Applied several patches submitted to me by Jeremy and Alex. * Changed version number to the CVS version number, so that I won't have to think about changing it ever again. Big version change should not be taken as a huge leap forward. 0.12 September 13, 2000 by JW/WADG * Added documentation to clarify autovivification issues when creating new sections * Fixed version number (Oops!) 0.11 September 13, 2000 by JW/WADG * Applied patch to Group and GroupMembers functions to return empty list when no groups are present (submitted by John Bass, Sep 13) 0.10 September 13, 2000 by JW/WADG * Fixed reference in POD to ReWriteFile. changes to RewriteConfig * Applied patch for failed open bug submitted by Mordechai T. Abzug Aug 18 * Doc'd behavior of failed open * Removed planned SIG testing from test.pl as SIGs have been removed * Applied patch from Thibault Deflers to fix bug in parameter list when a parameter value is undef 0.09 Hey! Where's the change log for 0.09? 0.08 2000-07-30 Adrian Phillips <adrianp@powertech.no> * test.pl: Fixed some tests which use $\, and made those that try to check a non existant val check against ! defined. * IniFiles.pm: hopefully fixed use of $\ when this is unset (problems found when running tests with -w). Similar problem with $/ which can be undefined and trying to return a val which does not exist. Modified val docs section to indicate a undef return when this occurs. 0.07 Looks like we missed a change log for 0.07. Bummer. 0.06 Sun Jun 25, 2000 by Daniel Winkelmann * Patch for uninitialized value bug in newval and setval 0.05 Sun Jun 18, 2000 by RBOW * Added something to shut up -w on VERSIONS * Removed unused variables 0.04 Thu Jun 15 - Fri Jun 16, 2000 by JW/WADG * Added support for -import option on ->new * Added support for tying a hash * Edited POD for grammer, clarity and updates * Updated test.pl file * Fixed bug in multiline/single line output * Fixed bug in default handling with tie interface * Added bugs to test.pl for regression * Fixed bug in {group} vs. {groups} property (first is valid) * Fixed return value for empty {sects} or {parms}{$sect} in Sections and Parameters methods 0.03 Thu Jun 15, 2000 by RBOW * Modifications to permit 'use strict', and to get 'make test' working again. 0.02 Tue Jun 13, 2000 by RBOW * Fixed bug reported by Bernie Cosell - Sections, Parameters, and GroupMembers return undef if there are no sections, parameters, or group members. These functions now return () if the particular value is undefined. * Added some contributed documentation, from Alex Satrapa, explaining how the internal data structure works. * Set up a project on SourceForge. (Not a change, but worth noting). * Added Groups method to return a list of section groups. 0.01 Mon Jun 12, 2000 by RBOW Some general code cleanup, in preparation for changes to come. Put up Majordomo mailing list and sent invitation to various people to join it.