socat(1)

NAME
socat - Multipurpose relay (SOcket CAT)

SYNOPSIS
socat [options] <address> <address>
socat -V
socat -h[h[h]] | -?[?[?]]
filan
procan

DESCRIPTION

Socat is a command line based utility that establishes two bidirectional byte streams and transfers data between them. Because the streams can be constructed from a large set of different types of data sinks and sources (see address types), and because lots of address options may be applied to the streams, socat can be used for many different purposes. It might be one of the tools that one `has already needed'.

Filan is a utility that prints information about its active file descriptors to stdout. It has been written for debugging socat, but might be useful for other purposes too. Use the -h option to find more infos.

Procan is a utility that prints information about process parameters to stdout. It has been written to better understand some UNIX process properties and for debugging socat, but might be useful for other purposes too.

The life cycle of a socat instance typically consists of four phases.

In the init phase, the command line options are parsed and logging is initialized.

During the open phase, socat opens the first address and afterwards the second address. These steps are usually blocking; thus, especially for complex address types like socks, connection requests or authentication dialogs must be completed before the next step is started.

In the transfer phase, socat watches both streams' read and write file descriptors via select(), and, when data is available on one side and can be written to the other side, socat reads it, performs newline character conversions if required, and writes the data to the write file descriptor of the other stream, then continues waiting for more data in both directions.

When one of the streams effectively reaches EOF, the closing phase begins. Socat transfers the EOF condition to the other stream, i.e. tries to shutdown only its write stream, giving it a chance to terminate gracefully. For a defined time socat continues to transfer data in the other direction, but then closes all remaining channels and terminates.

OPTIONS

Socat provides some command line options that modify the behaviour of the program. They have nothing to do with so called address options that are used as parts of address specifications.

-V  Print version and available feature information to stdout, and exit.

-h | -?
    Print a help text to stdout describing command line options and available address types, and exit.

-hh | -??
    Like -h, plus a list of the short names of all available address options. Some options are platform dependend, so this output is helpful for checking the particular implementation.

-hhh | -???
    Like -hh, plus a list of all available address option names.

-d  Without this option, only fatal and error messages are generated; applying this option also prints warning messages. See DIAGNOSTICS for more information.

-d -d
    Prints fatal, error, warning, and notice messages.

-d -d -d
    Prints fatal, error, warning, notice, and info messages.

-d -d -d -d
    Prints fatal, error, warning, notice, info, and debug messages.

-D  Logs information about file descriptors before starting the transfer phase.

-ly[<facility>]
    Writes messages to syslog instead of stderr; severity as defined with -d option. With optional <facility>, the syslog type can be selected, default is "daemon".

-lf <logfile>
    Writes messages to <logfile> [filename] instead of stderr.

-ls Writes messages to stderr (this is the default).

-lp<progname>
    Overrides the program name printed in error messages.

-lu Extends the timestamp of error messages to microsecond resolution. Does not work when logging to syslog.

-lm[<facility>]
    Mixed log mode. During startup messages are printed to stderr; when socat starts the transfer phase loop or daemon mode (i.e. after opening all streams and before starting data transfer, or, with listening sockets with fork option, before the first accept call), it switches logging to syslog. With optional <facility>, the syslog type can be selected, default is "daemon".

-lh Adds hostname to log messages. Uses the value from environment variable HOSTNAME or the value retrieved with uname() if HOSTNAME is not set.

-v  Writes the transferred data not only to their target streams, but also to stderr. The output format is text with some conversions for readability, and prefixed with "> " or "< " indicating flow directions.

-x  Writes the transferred data not only to their target streams, but also to stderr. The output format is hexadecimal, prefixed with "> " or "< " indicating flow directions. Can be combined with -v.

-b<size>
    Sets the data transfer block <size> [size_t]. At most <size> bytes are transferred per step. Default is 8192 bytes.

-s  By default, socat terminates when an error occurred to prevent the process from running when some option could not be applied. With this option, socat is sloppy with errors and tries to continue. Even with this option, socat will exit on fatals, and will abort connection attempts when security checks failed.

-t<timeout>
    When one channel has reached EOF, the write part of the other channel is shut down. Then, socat waits <timeout> [timeval] seconds before terminating. Default is 0.5 seconds. This timeout only applies to addresses where write and read part can be closed independently. When during the timeout intervall the read part gives EOF, socat terminates without awaiting the timeout.

-T<timeout>
    Total inactivity timeout: when socat is already in the transfer loop and nothing has happened for <timeout> [timeval] seconds (no data arrived, no interrupt occurred...) then it terminates. Useful with protocols like UDP that cannot transfer EOF.

-u  Uses unidirectional mode. The first address is only used for reading, and the second address is only used for writing.

-U  Uses unidirectional mode in reverse direction. The first address is only used for writing, and the second address is only used for reading.

-g  During address option parsing, don't check if the option is considered useful in the given address environment. Use it if you want to force, e.g., appliance of a socket option to a serial device.

-L<lockfile>
    If lockfile exists, exits with error. If lockfile does not exist, creates it and continues, unlinks lockfile on exit.

-W<lockfile>
    If lockfile exists, waits until it disappears. When lockfile does not exist, creates it and continues, unlinks lockfile on exit.

-4  Use IP version 4 in case that the addresses do not implicitly or explicitly specify a version; this is the default.

-6  Use IP version 6 in case that the addresses do not implicitly or explicitly specify a version.

ADDRESS SPECIFICATIONS

With the address command line arguments, the user gives socat instructions and the necessary information for establishing the byte streams.

An address specification usually consists of an address type keyword, zero or more required address parameters separated by ':' from the keyword and from each other, and zero or more address options separated by ','.

The keyword specifies the address type (e.g., TCP4, OPEN, EXEC). For some keywords there exist synonyms ('-' for STDIO, TCP for TCP4). Keywords are case insensitive. For a few special address types, the keyword may be omitted: Address specifications starting with a number are assumed to be FD (raw file descriptor) addresses; if a '/' is found before the first ':' or ',', GOPEN (generic file open) is assumed.

The required number and type of address parameters depend on the address type. E.g., TCP4 requires a server specification (name or address), and a port specification (number or service name).

Zero or more address options may be given with each address. They influence the address in some ways. Options consist of an option keyword or an option keyword and a value, separated by '='. Option keywords are case insensitive. For filtering the options that are useful with an address type, each option is member of one option group. For each address type there is a set of option groups allowed. Only options belonging to one of these address groups may be used (except with option -g).

Address specifications following the above schema are also called single address specifications. Two single addresses can be combined with "!!" to form a dual type address for one channel. Here, the first address is used by socat for reading data, and the second address for writing data. There is no way to specify an option only once for being applied to both single addresses.

Usually, addresses are opened in read/write mode. When an address is part of a dual address specification, or when option -u or -U is used, an address might be used only for reading or for writing. Considering this is important with some address types.

With socat version 1.5.0 and higher, the lexical analysis tries to handle quotes and parenthesis meaningfully and allows escaping of special characters. If one of the characters ( { [ ' is found, the corresponding closing character - ) } ] ' - is looked for; they may also be nested. Within these constructs, socats special characters and strings : , !! are not handled specially. All those characters and strings can be escaped with \ or within ""

ADDRESS TYPES

This section describes the available address types with their keywords, parameters, and semantics.

CREATE:<filename>
    Opens <filename> with creat() and uses the file descriptor for writing. This address type requires write-only context, because a file opened with creat cannot be read from. <filename> must be a valid existing or not existing path. If <filename> is a named pipe, creat() might block; if <filename> refers to a socket, this is an error.
    Option groups: FD,REG,NAMED
    Useful options: mode, user, group, unlink-early, unlink-late, append
    See also: OPEN, GOPEN

EXEC:<command-line>
    Forks a sub process that establishes communication with its parent process and invokes the specified program with execvp(). <command-line> is a simple command with arguments separated by single spaces. If the program name contains a '/', the part after the last '/' is taken as ARGV[0]. If the program name is a relative path, the execvp() semantics for finding the program via $PATH apply. After successful program start, socat writes data to stdin of the process and reads from its stdout using a UNIX domain socket generated by socketpair() per default.
    Option groups: FD,SOCKET,EXEC,FORK,TERMIOS
    Useful options: path, fdin, fdout, chroot, su, su-d, nofork, pty, stderr, ctty, setsid, pipes, login, sigint, sigquit
    See also: SYSTEM

FD:<fdnum>
    Uses the file descriptor <fdnum>. It must already exist as valid UN*X file descriptor.
    Option groups: FD (TERMIOS,REG,SOCKET)
    See also: STDIO, STDIN, STDOUT, STDERR

GOPEN:<filename>
    (Generic open) This address type tries to handle any file system entry except directories usefully. <filename> may be a relative or absolute path. If it already exists, its type is checked. In case of a UNIX domain socket, socat connects; if connecting fails, socat assumes a datagram socket and uses sendto() calls. If the entry is not a socket, socat opens it applying the O_APPEND flag. If it does not exist, it is opened with flag O_CREAT as a regular file.
    Option groups: FD,REG,SOCKET,NAMED,OPEN
    See also: OPEN, CREATE, UNIX-CONNECT

IP-SENDTO:<host>:<protocol>
    Opens a raw IP socket. Depending on host specification or option pf, IP procotol version 4 or 6 is used. It uses <protocol> to send packets to <host> [IP address] and receives packets from host, ignores packets from other hosts. Protocol 255 uses the raw socket with the IP header being part of the data.
    Option groups: FD,SOCKET,IP4,IP6
    Useful options: pf, ttl, broadcast
    See also: IP4-SENDTO, IP6-SENDTO, IP-RECVFROM, IP-RECV, UDP-SENDTO UNIX-SENDTO

IP4-SENDTO:<host>:<protocol>
    Like IP-SENDTO, but always uses IPv4.
    Option groups: FD,SOCKET,IP4

IP6-SENDTO:<host>:<protocol>
    Like IP-SENDTO, but always uses IPv6.
    Option groups: FD,SOCKET,IP6

IP-RECVFROM:<protocol>
    Opens a raw IP socket of <protocol>. Depending on option pf, IP procotol version 4 or 6 is used. It receives one packet from an unspecified peer and may send one or more answer packets to that peer. This mode is particularly useful with fork option where each arriving packet - from arbitrary peers - is handled by its own sub process. This allows a behaviour similar to typical UDP based servers like ntpd or named. This address works well with IP-SENDTO address peers (see above). Protocol 255 uses the raw socket with the IP header being part of the data.
    Option groups: FD,SOCKET,IP4,IP6,CHILD,RANGE
    Useful options: pf, fork, range, ttl, broadcast
    See also: IP4-RECVFROM, IP6-RECVFROM, IP-SENDTO, IP-RECV, UDP-RECVFROM, UNIX-RECVFROM

IP4-RECVFROM:<protocol>
    Like IP-RECVFROM, but always uses IPv4.
    Option groups: FD,SOCKET,IP4,CHILD,RANGE

IP6-RECVFROM:<protocol>
    Like IP-RECVFROM, but always uses IPv6.
    Option groups: FD,SOCKET,IP6,CHILD,RANGE

IP-RECV:<protocol>
    Opens a raw IP socket of <protocol>. Depending on option pf, IP procotol version 4 or 6 is used. It receives packets from multiple unspecified peers and merges the data. No replies are possible. It can be, e.g., addressed by socat IP-SENDTO address peers. Protocol 255 uses the raw socket with the IP header being part of the data.
    Option groups: FD,SOCKET,IP4,IP6,RANGE
    Useful options: pf, range
    See also: IP4-RECV, IP6-RECV, IP-SENDTO, IP-RECVFROM, UDP-RECV, UNIX-RECV

IP4-RECV:<protocol>
    Like IP-RECV, but always uses IPv4.
    Option groups: FD,SOCKET,IP4,RANGE

IP6-RECV:<protocol>
    Like IP-RECV, but always uses IPv6.
    Option groups: FD,SOCKET,IP6,RANGE

OPEN:<filename>
    Opens <filename> using the open() system call. This operation fails on UNIX domain sockets.
    Note: This address type is rarly useful in bidirectional mode.
    Option groups: FD,REG,NAMED,OPEN
    Useful options: creat, excl, noatime, nofollow, append, rdonly, wronly, lock, readbytes, ignoreeof
    See also: CREATE, GOPEN, UNIX-CONNECT

OPENSSL:<host>:<port>
    Tries to establish a SSL connection to <port> [TCP service] on <host> [IP address] using TCP/IP version 4 or 6 depending on address specification, name resolution, or option pf.
    NOTE: The server certificate is only checked for validity against cafile or capath, but not for match with the server's name or its IP address!
    Option groups: FD,SOCKET,IP4,IP6,TCP,OPENSSL,RETRY
    Useful options: cipher, method, verify, cafile, capath, certificate, bind, pf, connect-timeout, sourceport, retry
    See also: OPENSSL-LISTEN, TCP

OPENSSL-LISTEN:<port>
    Listens on tcp <port> [TCP service]. The IP version is 4 or the one specified with pf. When a connection is accepted, this address behaves as SSL server.
    Note: You probably want to use the certificate option with this address.
    NOTE: Without verify option, the client certificate is not checked. Even with verify option, the client certificate is only checked for validity against cafile or capath, but not for match with the client's name or its IP address!
    Option groups: FD,SOCKET,IP4,IP6,TCP,LISTEN,OPENSSL,CHILD,RANGE,RETRY
    Useful options: pf, cipher, method, verify, cafile, capath, certificate, fork, bind, range, tcpwrap, su, reuseaddr, retry
    See also: OPENSSL, TCP

PIPE:<filename>
    If <filename> already exists, it is opened. If is does not exist, a named pipe is created and opened. Beginning with socat version 1.4.3, the named pipe is removed when the address is closed (but see option unlink-close
    Note: When a pipe is used for both reading and writing, it works as echo service.
    Note: When a pipe is used for both reading and writing, and socat tries to write more bytes than the pipe can buffer (Linux 2.4: 2048 bytes), socat might block. Consider using socat option, e.g., -b 2048
    Option groups: FD,NAMED,OPEN
    Useful options: rdonly, nonblock, group, user, mode, unlink-early
    See also: unnamed pipe

PIPE
    Creates an unnamed pipe and uses it for reading and writing. It works as an echo, because everything written to it appeares immediately as read data.
    Note: When socat tries to write more bytes than the pipe can queue (Linux 2.4: 2048 bytes), socat might block. Consider, e.g., using option -b 2048
    Option groups: FD
    See also: named pipe

PROXY:<proxy>:<hostname>:<port>
    Connects to an HTTP proxy server on port 8080 using TCP/IP version 4 or 6 depending on address specification, name resolution, or option pf, and sends a CONNECT request for hostname:port. If the proxy grants access and succeeds to connect to the target, data transfer between socat and the target can start. Note that the traffic need not be HTTP but can be an arbitrary protocol.
    Option groups: FD,SOCKET,IP4,IP6,TCP,HTTP,RETRY
    Useful options: proxyport, ignorecr, proxyauth, resolve, crnl, bind, connect-timeout, mss, sourceport, retry
    See also: SOCKS, TCP

PTY Generates a pseudo terminal (pty) and uses its master side. Another process may open the pty's slave side using it like a serial line or terminal. If both the ptmx and the openpty mechanisms are available, ptmx is used (POSIX).
    Option groups: FD,NAMED,PTY,TERMIOS
    Useful options: link, openpty, wait-slave, mode, user, group
    See also: UNIX-LISTEN, PIPE, EXEC, SYSTEM

READLINE
    Uses GNU readline and history on stdio to allow editing and reusing input lines. This requires the GNU readline and history libraries. Note that stdio should be a (pseudo) terminal device, otherwise readline does not seem to work.
    Option groups: FD,READLINE,TERMIOS
    Useful options: history, noecho
    See also: STDIO

SOCKS4:<socks-server>:<host>:<port>
    Connects via <socks-server> [IP address] to <host> [IPv4 address] on <port> [TCP service], using socks version 4 protocol over IP version 4 or 6 depending on address specification, name resolution, or option pf.
    Option groups: FD,SOCKET,IP4,IP6,TCP,SOCKS4,RETRY
    Useful options: socksuser, socksport, sourceport, pf, retry
    See also: SOCKS4A, PROXY, TCP

SOCKS4A:<socks-server>:<host>:<port>
    like SOCKS4, but uses socks protocol version 4a, thus leaving host name resolution to the socks server.
    Option groups: FD,SOCKET,IP4,IP6,TCP,SOCKS4,RETRY

STDERR
    Uses file descriptor 2.
    Option groups: FD (TERMIOS,REG,SOCKET)
    See also: FD

STDIN
    Uses file descriptor 0.
    Option groups: FD (TERMIOS,REG,SOCKET)
    Useful options: readbytes
    See also: FD

STDIO
    Uses file descriptor 0 for reading, and 1 for writing.
    Option groups: FD (TERMIOS,REG,SOCKET)
    Useful options: readbytes
    See also: FD

STDOUT
    Uses file descriptor 1.
    Option groups: FD (TERMIOS,REG,SOCKET)
    See also: FD

SYSTEM:<shell-command>
    Forks a sub process that establishes communication with its parent process and invokes the specified program with system(). Please note that <shell-command> [string] must not contain ',' or "!!", and that shell meta characters may have to be protected. After successful program start, socat writes data to stdin of the process and reads from its stdout.
    Option groups: FD,SOCKET,EXEC,FORK,TERMIOS
    Useful options: path, fdin, fdout, chroot, su, su-d, nofork, pty, stderr, ctty, setsid, pipes, sigint, sigquit
    See also: EXEC

TCP:<host>:<port>
    Connects to <port> [TCP service] on <host> [IP address] using TCP/IP version 4 or 6 depending on address specification, name resolution, or option pf.
    Option groups: FD,SOCKET,IP4,IP6,TCP,RETRY
    Useful options: crnl, bind, pf, connect-timeout, tos, mtudiscover, mss, nodelay, nonblock, sourceport, retry, readbytes
    See also: TCP4, TCP6, TCP-LISTEN, UDP, UNIX-CONNECT

TCP4:<host>:<port>
    Like TCP, but only supports IPv4 protocol.
    Option groups: FD,SOCKET,IP4,TCP,RETRY

TCP6:<host>:<port>
    Like TCP, but only supports IPv6 protocol.
    Option groups: FD,SOCKET,IP6,TCP,RETRY

TCP-LISTEN:<port>
    Listens on <port> [TCP service] and accepts a TCP/IP connection. The IP version is 4 or the one specified with pf. Note that opening this address usually blocks until a client connects.
    Option groups: FD,SOCKET,LISTEN,CHILD,RANGE,IP4,IP6,TCP,RETRY
    Useful options: crnl, fork, bind, range, tcpwrap, pf, backlog, mss, su, reuseaddr, retry, retry
    See also: TCP4-LISTEN, TCP6-LISTEN, UDP-LISTEN, UNIX-LISTEN, OPENSSL-LISTEN

TCP4-LISTEN:<port>
    Like TCP-LISTEN, but only supports IPv4 protocol.
    Option groups: FD,SOCKET,LISTEN,CHILD,RANGE,IP4,TCP,RETRY

TCP6-LISTEN:<port>
    Like TCP-LISTEN, but only supports IPv6 protocol.
    Additional useful option: ipv6only
    Option groups: FD,SOCKET,LISTEN,CHILD,RANGE,IP6,TCP,RETRY

UDP:<host>:<port>
    Connects to <port> [UDP service] on <host> [IP address] using UDP/IP version 4 or 6 depending on address specification, name resolution, or option pf.
    Please note that, due to UDP protocol properties, no real connection is established; data has to be sent for `connecting' to the server, and no end-of-file condition can be transported.
    Option groups: FD,SOCKET,IP4,IP6
    Useful options: ttl, tos, bind, sourceport, pf
    See also: UDP4, UDP6, UDP-LISTEN, TCP, IP

UDP4:<host>:<port>
    Like UDP, but only supports IPv4 protocol.
    Option groups: FD,SOCKET,IP4

UDP6:<host>:<port>
    Like UDP, but only supports IPv6 protocol.
    Option groups: FD,SOCKET,IP6

UDP-LISTEN:<port>
    Waits for a UDP/IP packet arriving on <port> [UDP service] and `connects' back to sender. The accepted IP version is 4 or the one specified with option pf. Please note that, due to UDP protocol properties, no real connection is established; data has to arrive from the peer first, and no end-of-file condition can be transported. Note that opening this address usually blocks until a client connects.
    Option groups: FD,SOCKET,LISTEN,CHILD,RANGE,IP4,IP6
    Useful options: fork, bind, range, pf
    See also: UDP, UDP4-LISTEN, UDP6-LISTEN, TCP-LISTEN

UDP4-LISTEN:<port>
    Like UDP-LISTEN, but only support IPv4 protocol.
    Option groups: FD,SOCKET,LISTEN,CHILD,RANGE,IP4

UDP6-LISTEN:<port>
    Like UDP-LISTEN, but only support IPv6 protocol.
    Option groups: FD,SOCKET,LISTEN,CHILD,RANGE,IP6

UDP-SENDTO:<host>:<port>
    Communicates with the specified peer socket, defined by <port> [UDP service] on <host> [IP address], using UDP/IP version 4 or 6 depending on address specification, name resolution, or option pf. It sends packets to and receives packets from that peer socket only. This is effectively a datagram client. It works well with socat UDP-RECVFROM and UDP-RECV address peers.
    Option groups: FD,SOCKET,IP4,IP6
    Useful options: ttl, tos, bind, sourceport, pf
    See also: UDP4-SENDTO, UDP6-SENDTO, UDP-RECVFROM, UDP-RECV, UDP-CONNECT, UDP-LISTEN, IP-SENDTO

UDP4-SENDTO:<host>:<port>
    Like UDP-SENDTO, but only supports IPv4 protocol.
    Option groups: FD,SOCKET,IP4

UDP6-SENDTO:<host>:<port>
    Like UDP-SENDTO, but only supports IPv6 protocol.
    Option groups: FD,SOCKET,IP6

UDP-RECVFROM:<port>
    Creates a UDP socket on <port> [UDP service] using UDP/IP version 4 or 6 depending on option pf. It receives one packet from an unspecified peer and may send one or more answer packets to that peer. This mode is particularly useful with fork option where each arriving packet - from arbitrary peers - is handled by its own sub process. This allows a behaviour similar to typical UDP based servers like ntpd or named. This address works well with socat SENDTO address peers.
    Option groups: FD,SOCKET,IP4,IP6,CHILD,RANGE
    Useful options: fork, ttl, tos, bind, sourceport, pf
    See also: UDP4-RECVFROM, UDP6-RECVFROM, UDP-SENDTO, UDP-RECV, UDP-CONNECT, UDP-LISTEN, IP-RECVFROM, UNIX-RECVFROM

UDP4-RECVFROM:<port>
    Like UDP-RECVFROM, but only supports IPv4 protocol.
    Option groups: FD,SOCKET,IP4,CHILD,RANGE

UDP6-RECVFROM:<port>
    Like UDP-RECVFROM, but only supports IPv6 protocol.
    Option groups: FD,SOCKET,IP6,CHILD,RANGE

UDP-RECV:<port>
    Creates a UDP socket on <port> [UDP service] using UDP/IP version 4 or 6 depending on option pf. It receives packets from multiple unspecified peers and merges the data. No replies are possible. It can be, e.g., addressed by socat UDP-SENDTO address peers. This address works well with socat SENDTO address peers; it behaves similar to a syslog server.
    Option groups: FD,SOCKET,IP4,IP6,RANGE
    Useful options: fork, pf, bind, sourceport, ttl, tos
    See also: UDP4-RECV, UDP6-RECV, UDP-SENDTO, UDP-RECVFROM, UDP-CONNECT, UDP-LISTEN, IP-RECV, UNIX-RECV

UDP4-RECV:<port>
    Like UDP-RECV, but only supports IPv4 protocol.
    Option groups: FD,SOCKET,IP4,RANGE

UDP6-RECV:<port>
    Like UDP-RECV, but only supports IPv6 protocol.
    Option groups: FD,SOCKET,IP6,RANGE

UNIX-CONNECT:<filename>
    Connects to <filename> assuming it is a UNIX domain socket. If <filename> does not exist, this is an error; if <filename> is not a UNIX domain socket, this is an error; if <filename> is a UNIX domain socket, but no process is listening, this is an error.
    Option groups: FD,SOCKET,NAMED,RETRY
    ) Useful options: bind
    See also: UNIX-LISTEN, UNIX-SENDTO, TCP

UNIX-LISTEN:<filename>
    Listens on <filename> using a UNIX domain stream socket and accepts a connection. If <filename> exists and is not a socket, this is an error. If <filename> exists and is a UNIX domain socket, binding to the address fails (use option unlink-early!). Note that opening this address usually blocks until a client connects. Beginning with socat version 1.4.3, the file system entry is removed when this address is closed (but see option unlink-close).
    Option groups: FD,SOCKET,NAMED,LISTEN,CHILD,RETRY
    Useful options: fork, umask, mode, user, group, unlink-early
    See also: UNIX-CONNECT, UNIX-RECVFROM, UNIX-RECV, TCP-LISTEN

UNIX-SENDTO:<filename>
    Communicates with the specified peer socket, defined by [<filename>] assuming it is a UNIX domain datagram socket. It sends packets to and receives packets from that peer socket only. It works well with socat UNIX-RECVFROM and UNIX-RECV address peers.
    Option groups: FD,SOCKET,NAMED
    Useful options: bind
    See also: UNIX-RECVFROM, UNIX-RECV, UNIX-CONNECT, UDP-SENDTO, IP-SENDTO

UNIX-RECVFROM:<filename>
    Creates a UNIX domain datagram socket [<filename>]. Receives one packet and may send one or more answer packets to that peer. This mode is particularly useful with fork option where each arriving packet - from arbitrary peers - is handled by its own sub process. This address works well with socat UNIX-SENDTO address peers.
    Option groups: FD,SOCKET,NAMED,CHILD
    Useful options: fork
    See also: UNIX-SENDTO, UNIX-RECV, UNIX-LISTEN, UDP-RECVFROM, IP-RECVFROM

UNIX-RECV:<filename>
    Creates a UNIX domain datagram socket [<filename>]. Receives packets from multiple unspecified peers and merges the data. No replies are possible. It can be, e.g., addressed by socat UNIX-SENDTO address peers. It behaves similar to a syslog server. Option groups: FD,SOCKET,NAMED
    See also: UNIX-SENDTO, UNIX-RECVFROM, UNIX-LISTEN, UDP-RECV, IP-RECV

UNIX:<filename>
    Communicates with the specified peer socket, defined by [<filename>] assuming it is a UNIX domain socket. It first tries to connect and, if that fails, assumes it is a datagram socket, thus supporting both types.
    Option groups: FD,SOCKET,NAMED
    Useful options: bind
    See also: UNIX-CONNECT, UNIX-SENDTO, GOPEN

ADDRESS OPTIONS

Address options can be applied to address specifications to influence the process of opening the addresses and the properties of the resulting data channels.

For technical reasons not every option can be applied to every address type; e.g., applying a socket option to a regular file will fail. To catch most useless combinations as early as in the open phase, the concept of option groups was introduced. Each option belongs to one or more option groups. Options can be used only with address types that support at least one of their option groups (but see option -g).

Address options have data types that their values must conform to. Every address option consists of just a keyword or a keyword followed by "=value", where value must conform to the options type. Some address options manipulate parameters of system calls; e.g., option sync sets the O_SYNC flag with the open() call. Other options cause a system or library call; e.g., with option `ttl=value' the setsockopt(fd, SOL_IP, IP_TTL, value, sizeof(int)) call is applied. Other options set internal socat variables that are used during data transfer; e.g., `crnl' causes explicit character conversions. A few options have more complex implementations; e.g., su-d (substuser-delayed) inquires some user and group infos, stores them, and applies them later after a possible chroot() call.

If multiple options are given to an address, their sequence in the address specification has (almost) no effect on the sequence of their execution/application. Instead, socat has built in an option phase model that tries to bring the options in a useful order. Some options exist in different forms (e.g., unlink, unlink-early, unlink-late) to control the time of their execution.

If the same option is specified more than once within one address specification, with equal or different values, the effect depends on the kind of option. Options resulting in function calls like setsockopt() cause multiple invocations. With options that set parameters for a required call like open() or set internal flags, the value of the last option occurrence is effective.

The existence or semantics of many options are system dependent. Socat usually does NOT try to emulate missing libc or kernel features, it just provides an interface to the underlying system. So, if an operating system lacks a feature, the related option is simply not available on this platform.

The following paragraphs introduce just the more common address options. For a more comprehensive reference and to find information about canonical option names, alias names, option phases, and platforms see file xio.help.

FD option group

This option group contains options that are applied to a UN*X style file descriptor, no matter how it was generated. Because all current socat address types are file descriptor based, these options may be applied to any address.
Note: Some of these options are also member of another option group, that provides an other, non-fd based mechanism. For these options, it depends on the actual address type and its option groups which mechanism is used. The second, non-fd based mechanism is prioritized.

cloexec=<bool>
    Sets the FD_CLOEXEC flag with the fcntl() system call to value <bool>. If set, the file descriptor is closed on exec() family function calls. Socat internally handles this flag for the fds it controls, so in most cases there will be no need to apply this option.

setlk
    Tries to set a discretionary lock to the whole file using the fcntl(fd, F_SETLK, ...) system call. If the file is already locked, this call results in an error.

setlkw
    Tries to set a discretionary waiting lock to the whole file using the fcntl(fd, F_SETLKW, ...) system call. If the file is already locked, this call blocks.

flock-ex
    Tries to set a blocking exclusive advisory lock to the file using the flock(fd, LOCK_EX) system call. Socat hangs in this call if the file is locked by another process.

flock-ex-nb
    Tries to set a nonblocking exclusive advisory lock to the file using the flock(fd, LOCK_EX) system call. If the file is already locked, this option results in an error.

flock-sh
    Tries to set a blocking shared advisory lock to the file using the flock(fd, LOCK_SH) system call. Socat hangs in this call if the file is locked by another process.

flock-sh-nb
    Tries to set a nonblocking shared advisory lock to the file using the flock(fd, LOCK_SH|LOCK_NB) system call. If the file is already locked, this option results in an error.

lock
    Sets a blocking lock on the file. Uses the setlk or flock mechanism depending on availability on the particular platform. If both are available, the POSIX variant (setlkw) is selected.

user=<user>
    Sets the <user> (owner) of the stream. If the address is member of the NAMED option group, socat uses the chown() system call after opening the file or binding to the UNIX domain socket (race condition!). Without filesystem entry, socat sets the user of the stream using the fchown() system call. These calls might require root privilege.

user-late=<user>
    Sets the owner of the fd to <user> with the fchown() system call after opening or connecting the channel. This is useful only on file system entries.

group=<group>
    Sets the <group> of the stream. If the address is member of the NAMED option group, socat uses the chown() system call after opening the file or binding to the UNIX domain socket (race condition!). Without filesystem entry, socat sets the group of the stream with the fchown() system call. These calls might require group membership or root privilege.

group-late=<group>
    Sets the group of the fd to <group> with the fchown() system call after opening or connecting the channel. This is useful only on file system entries.

mode=<mode>
    Sets the <mode> [mode_t] (permissions) of the stream. If the address is member of the NAMED option group and uses the open() or creat() call, the mode is applied with these. If the address is member of the NAMED option group without using these system calls, socat uses the chmod() system call after opening the filesystem entry or binding to the UNIX domain socket (race condition!). Otherwise, socat sets the mode of the stream using fchmod(). These calls might require ownership or root privilege.

perm-late=<mode>
    Sets the permissions of the fd to value <mode> [mode_t] using the fchmod() system call after opening or connecting the channel. This is useful only on file system entries.

append=<bool>
    Always writes data to the actual end of file. If the address is member of the OPEN option group, socat uses the O_APPEND flag with the open() system call. Otherwise, socat applies the fcntl(fd, F_SETFL, O_APPEND) call.

nonblock=<bool>
    Tries to open or use file in nonblocking mode. Its only effects are that the connect() call of TCP addresses does not block, and that opening a named pipe for reading does not block. If the address is member of the OPEN option group, socat uses the O_NONBLOCK flag with the open() system call. Otherwise, socat applies the fcntl(fd, F_SETFL, O_NONBLOCK) call.

binary
    Opens the file in binary mode to avoid implicit line terminator conversions (Cygwin).

text
    Opens the file in text mode to force implicit line terminator conversions (Cygwin).

noinherit
    Does not keep this file open in a spawned process (Cygwin).

cool-write
    Takes it easy when write fails with EPIPE or ECONNRESET and logs the message with notice level instead of error. This prevents the log file from being filled with useless error messages when socat is used as a high volume server or proxy where clients often abort the connection.
    This option is experimental.

NAMED option group

These options work on file system entries.
See also options user, group, and mode.

user-early=<user>
    Changes the <user> (owner) of the file system entry before accessing it, using the chown() system call. This call might require root privilege.

group-early=<group>
    Changes the <group> of the file system entry before accessing it, using the chown() system call. This call might require group membership or root privilege.

perm-early=<mode>
    Changes the <mode> [mode_t] of the file system entry before accessing it, using the chmod() system call. This call might require ownership or root privilege.

umask=<mode>
    Sets the umask of the process to <mode> [mode_t] before accessing the file system entry (useful with UNIX domain sockets!). This call might affect all further operations of the socat process!

unlink-early
    Unlinks (removes) the file before opening it and even before applying user-early etc.

unlink
    Unlinks (removes) the file before accessing it, but after user-early etc.

unlink-late
    Unlinks (removes) the file after opening it to make it inaccessible for other processes after a short race condition.

unlink-close
    Removes the addresses file system entry when closing the address. For named pipes, listening unix domain sockets, and the symbolic links of pty addresses, the default is 1; for created files, opened files, generic opened files, and client unix domain sockets the default is 0.

OPEN option group

The OPEN group options allow to set flags with the open() system call. E.g., option `creat' sets the O_CREAT flag.
See also options append and nonblock.

creat=<bool>
    Creates the file if it does not exist.

dsync=<bool>
    Blocks write() calls until metainfo is physically written to media.

excl=<bool>
    With option creat, if file exists this is an error.

largefile=<bool>
    On 32 bit systems, allows a file larger than 2^31 bytes.

noatime
    Sets the O_NOATIME options, so reads do not change the access timestamp.

noctty=<bool>
    Does not make this file the controlling terminal.

nofollow=<bool>
    Does not follow symbolic links.

nshare=<bool>
    Does not allow to share this file with other processes.

rshare=<bool>
    Does not allow other processes to open this file for writing.

rsync=<bool>
    Blocks write() until metainfo is physically written to media.

sync=<bool>
    Blocks write() until data is physically written to media.

rdonly=<bool>
    Opens the file for reading only.

wronly=<bool>
    Opens the file for writing only.

trunc
    Truncates the file to size 0 during opening it.

REG and BLK option group

These options are usually applied to a UN*X file descriptor, but their semantics make sense only on a file supporting random access.

seek=<offset>
    Applies the lseek(fd, <offset>, SEEK_SET) (or lseek64) system call, thus positioning the file pointer absolutely to <offset> [off_t or off64_t].

seek-cur=<offset>
    Applies the lseek(fd, <offset>, SEEK_CUR) (or lseek64) system call, thus positioning the file pointer <offset> [off_t or off64_t] bytes relatively to its current position (which is usually 0).

seek-end=<offset>
    Applies the lseek(fd, <offset>, SEEK_END) (or lseek64) system call, thus positioning the file pointer <offset> [off_t or off64_t] bytes relatively to the files current end.

ftruncate=<offset>
    Applies the ftruncate(fd, <offset>) (or ftruncate64 if available) system call, thus truncating the file at the position <offset> [off_t or off64_t].

secrm=<bool>

unrm=<bool>

compr=<bool>

ext2-sync=<bool>

immutable=<bool>

ext2-append=<bool>

nodump=<bool>

ext2-noatime=<bool>

journal-data=<bool>

notail=<bool>

dirsync=<bool>
    These options change non standard file attributes on operating systems and file systems that support these features, like Linux with ext2fs, ext3fs, or reiserfs. See man 1 chattr for information on these options. Please note that there might be a race condition between creating the file and applying these options.

PROCESS option group

Options of this group change the process properties instead of just affecting one data channel. For EXEC and SYSTEM addresses and for LISTEN and CONNECT type addresses with option FORK, these options apply to the child processes instead of the main socat process.

chroot=<directory>
    Performs a chroot() operation to <directory> after processing the address. This call might require root privilege.

chroot-early=<directory>
    Performs a chroot() operation to <directory> before opening the address. This call might require root privilege.

setgid=<group>
    Changes the primary <group> of the process after processing the address. This call might require root privilege.

setgid-early=<group>
    Changes the primary <group> of the process before opening the address. This call might require root privilege.

setuid=<user>
    Changes the <user> (owner) of the process after processing the address. This call might require root privilege.

setuid-early=<user>
    Changes the <user> (owner) of the process before opening the address. This call might require root privilege.

su=<user>
    Changes the <user> (owner) and groups of the process after processing the address. This call might require root privilege.

su-d=<user>
    Short name for substuser-delayed. Changes the <user> (owner) and groups of the process after processing the address. The user and his groups are retrieved before a possible chroot(). This call might require root privilege.

setpgid=<pid_t>
    Makes the process a member of the specified process group <pid_t>. If no value is given, or if the value is 0 or 1, the process becomes leader of a new process group.

setsid
    Makes the process the leader of a new session.

READLINE option group

These options apply to the readline address type.

history=<filename>
    Reads and writes history from/to <filename>.

noprompt
    Since version 1.4.0, socat per default tries to determine a prompt - that is then passed to the readline call - by remembering the last incomplete line of the output. With this option, socat does not pass a prompt to readline, so it begins line editing in the first column of the terminal.

noecho=<pattern>
    Specifies a regular pattern for a prompt that prevents the following input line from being displayed on the screen and from being added to the history. The prompt is defined as the text that was output to the readline address after the lastest newline character and before an input character was typed. The pattern is a regular expression, e.g. "^[Pp]assword:.*$" or "([Uu]ser:|[Pp]assword:)". See regex(7) for details.

prompt=<string>
    Passes the string as prompt to the readline function. readline prints this prompt when stepping through the history. If this string matches a constant prompt issued by an interactive program on the other socat address, consistent look and feel can be archieved.

APPLICATION option group

This group contains options that work at data level. Note that these options only apply to the "raw" data transferred by socat, but not to protocol data used by addresses like PROXY.

cr  Converts the default line termination character NL ('\n', 0x0a) to/from CR ('\r', 0x0d) when writing/reading on this channel.

crnl
    Converts the default line termination character NL ('\n', 0x0a) to/from CRNL ("\r\n", 0x0d0a) when writing/reading on this channel. Note: socat simply strips all CR characters.

ignoreeof
    When EOF occurs on this channel, socat ignores it and tries to read more data (like "tail -f").

readbytes=<bytes>
    socat reads only so many bytes from this address (the address provides only so many bytes for transfer and pretends to be at EOF afterwards). Must be greater than 0.

lockfile=<filename>
    If lockfile exists, exits with error. If lockfile does not exist, creates it and continues, unlinks lockfile on exit.

waitlock=<filename>
    If lockfile exists, waits until it disappears. When lockfile does not exist, creates it and continues, unlinks lockfile on exit.

SOCKET option group

These options are intended for all kinds of sockets, e.g. IP or UNIX domain. Most are applied with a setsockopt() call.

bind=<sockname>
    Binds the socket to the given socket address using the bind() system call. The form of <sockname> is socket domain dependent: IP4 and IP6 allow the form [hostname|hostaddress][:(service|port)], UNIX domain sockets require <filename>.

connect-timeout=<seconds>
    Abort the connection attempt after <seconds> [timeval] with error status.

interface=<interface>
    Binds the socket to the given <interface>. This option might require root privilege.

broadcast
    For datagram sockets, allows sending to broadcast addresses and receiving packets addressed to broadcast addresses.

bsdcompat
    Emulates some (old?) bugs of the BSD socket implementation.

debug
    Enables socket debugging.

dontroute
    Only communicates with directly connected peers, does not use routers.

keepalive
    Enables sending keepalives on the socket.

linger=<seconds>
    Blocks shutdown() or close() until data transfers have finished or the given timeout [int] expired.

oobinline
    Places out-of-band data in the input data stream.

priority=<priority>
    Sets the protocol defined <priority> [<int>] for outgoing packets.

rcvbuf=<bytes>
    Sets the size of the receive buffer after the socket() call to <bytes> [int]. With TCP sockets, this value corresponds to the socket's maximal window size.

rcvbuf-late=<bytes>
    Sets the size of the receive buffer when the socket is already connected to <bytes> [int]. With TCP sockets, this value corresponds to the socket's maximal window size.

rcvlowat=<bytes>
    Specifies the minimum number of received bytes [int] until the socket layer will pass the buffered data to socat.

rcvtimeo=<seconds>
    Sets the receive timeout [timeval].

reuseaddr
    Allows other sockets to bind to an address even if parts of it (e.g. the local port) are already in use by socat.

sndbuf=<bytes>
    Sets the size of the send buffer after the socket() call to <bytes> [int].

sndbuf-late=<bytes>
    Sets the size of the send buffer when the socket is connected to <bytes> [int].

sndlowat=<bytes>
    Specifies the minimum number of bytes in the send buffer until the socket layer will send the data to <bytes> [int].

sndtimeo=<seconds>
    Sets the send timeout to seconds [timeval].

type=<type>
    Sets the type of the socket, usually as argument to the socket() or socketpair() call, to <type> [int]. Under Linux, 1 means stream oriented socket, 2 means datagram socket, and 3 means raw socket.

pf=<string>
    Forces the use of the specified IP version. <string> can be something like "ip4" or "ip6".

IP4 and IP6 option groups

These options can be used with IPv4 and IPv6 based sockets.

tos=<tos>
    Sets the TOS (type of service) field of outgoing packets to <tos> [byte] (see RFC 791).

ttl=<ttl>
    Sets the TTL (time to live) field of outgoing packets to <ttl> [byte].

ipoptions=<data>
    Sets IP options like source routing. Must be given in binary form, recommended format is a leading "x" followed by an even number of hex digits. This option may be used multiple times, data are appended. E.g., to connect to host 10.0.0.1 via some gateway using a loose source route, use the gateway as address parameter and set a loose source route using the option ipoptions=x8307040a000001.
    IP options are defined in RFC 791.

mtudiscover=<0|1|2>
    Takes 0, 1, 2 to never, want, or always use path MTU discover on this socket.

res-debug

res-aaonly

res-usevc

res-primary

res-igntc

res-recurse

res-defnames

res-stayopen

res-dnsrch
    These options set the corresponding resolver (name resolution) option flags. Append "=0" to clear a default option. See man resolver(5) for more information on these options. Note: these options are valid only for the address they are applied to.

IP6 option group

These options can only be used on IPv6 based sockets. See IP options for options that can be applied to both IPv4 and IPv6 sockets.

ipv6only=<bool>
    Sets the IPV6_V6ONLY socket option. If 0, the TCP stack will also accept connections using IPv4 protocol on the same port. The default is system dependent.

TCP option group

These options may be applied to TCP sockets. They work by invoking setsockopt() with the appropriate parameters.

cork
    Doesn't send packets smaller than MSS (maximal segment size).

defer-accept
    While listening, accepts connections only when data from the peer arrived.

keepcnt=<count>
    Sets the number of keepalives before shutting down the socket to <count> [int].

keepidle=<seconds>
    Sets the idle time before sending the first keepalive to <seconds> [int].

keepintvl=<seconds>
    Sets the intervall between two keepalives to <seconds> [int].

linger2=<seconds>
    Sets the time to keep the socket in FIN-WAIT-2 state to <seconds> [int].

mss=<bytes>
    Sets the MSS (maximum segment size) after the socket() call to <bytes> [int]. This value is then proposed to the peer with the SYN or SYN/ACK packet.

mss-late=<bytes>
    Sets the MSS of the socket after connection has been established to <bytes> [int].

nodelay
    Turns off the Nagle algorithm for measuring the RTT (round trip time).

rfc1323
    Enables RFC1323 TCP options: TCP window scale, round-trip time measurement (RTTM), and protect against wrapped sequence numbers (PAWS) (AIX).

stdurg
    Enables RFC1122 compliant urgent pointer handling (AIX).

syncnt=<count>
    Sets the maximal number of SYN retransmits during connect to <count> [int].

md5sig
    Enables generation of MD5 digests on the packets (FreeBSD).

noopt
    Disables use of TCP options (FreeBSD, MacOSX).

nopush
    sets the TCP_NOPUSH socket option (FreeBSD, MacOSX).

sack-disable
    Disables use the selective acknowledge feature (OpenBSD).

signature-enable
    Enables generation of MD5 digests on the packets (OpenBSD).

abort-threshold=<milliseconds>
    Sets the time to wait for an answer of the peer on an established connection (HP-UX).

conn-abort-threshold=<milliseconds>
    Sets the time to wait for an answer of the server during the initial connect (HP-UX).

keepinit
    Sets the time to wait for an answer of the server during connect() before giving up. Value in half seconds, default is 150 (75s) (Tru64).

paws
    Enables the "protect against wrapped sequence numbers" feature (Tru64).

sackena
    Enables selective acknowledge (Tru64).

tsoptena
    Enables the time stamp option that allows RTT recalculation on existing connections (Tru64).

UDP and TCP option groups

Here we find options that are related to the network port mechanism and that thus can be used with UDP and TCP, client and server addresses.

sourceport=<port>
    For outgoing (client) TCP and UDP connections, it sets the source <port> using an extra bind() call. With TCP or UDP listen addresses, socat immediately shuts down the connection if the client does not use this sourceport.

lowport
    Outgoing (client) TCP and UDP connections with this option use an unused random source port between 640 and 1023 incl. On UNIX class operating systems, this requires root privilege, and thus indicates that the client process is authorized by local root. TCP and UDP listen addresses with this option immediately shut down the connection if the client does not use a sourceport <= 1023. This mechanism can provide limited authorization under some circumstances.

SOCKS option group

When using SOCKS type addresses, some socks specific options can be set.

socksport=<tcp service>
    Overrides the default "socks" service or port 1080 for the socks server port with <TCP service>.

socksuser=<user>
    Sends the <user> [string] in the username field to the socks server. Default is the actual user name ($LOGNAME or $USER).

HTTP option group

Options that can be provided with HTTP type addresses. The only HTTP address currently implemented is proxy-connect.

proxyport=<TCP service>
    Overrides the default HTTP proxy port 8080 with <TCP service>.

ignorecr
    The HTTP protocol requires the use of CR+NL as line terminator. When a proxy server violates this standard, socat might not understand its answer. This option directs socat to interprete NL as line terminator and to ignore CR in the answer. Nevertheless, socat sends CR+NL to the proxy.

proxyauth=<username>:<password>
    Provide "basic" authentication to the proxy server. The argument to the option is used with a "Proxy-Authorization: Base" header in base64 encoded form.
    Note: username and password are visible for every user on the local machine in the process list; username and password are transferred to the proxy server unencrypted (base64 encoded) and might be sniffed.

resolve
    Per default, socat sends to the proxy a CONNECT request containing the target hostname. With this option, socat resolves the hostname locally and sends the IP address.

RANGE option group

These options check if a connecting client is granted access. They can be applied to listening and receiving network sockets. tcp-wrappers options fall into this group.

range=<address-range>
    After accepting a connection, tests if the peer is within range. For IPv4 addresses, address-range takes the form ww.xx.yy.zz/bits, e.g. 10.0.0.0/8; for IPv6, it is [ip6-address/bits], e.g. [::1/128]. If the client address does not match, socat issues a warning and keeps listening/receiving.

tcpwrap[=<name>]
    Uses Wietse Venema's libwrap (tcpd) library to determine if the client is allowed to connect. The configuration files are /etc/hosts.allow and /etc/hosts.deny per default, see "man 5 hosts_access" for more information. The optional <name> (type string) is passed to the wrapper functions as daemon process name. If omitted, the basename of socats invocation (argv[0]) is passed. If both tcpwrap and range options are applied to an address, both conditions must be fulfilled to allow the connection.

allow-table=<filename>
    Takes the specified file instead of /etc/hosts.allow.

deny-table=<filename>
    Takes the specified file instead of /etc/hosts.deny.

tcpwrap-etc=<directoryname>
    Looks for hosts.allow and hosts.deny in the specified directory. Is overridden by options hosts-allow and hosts-deny.

LISTEN option group

Options specific to listening sockets.

backlog=<count>
    Sets the backlog value passed with the listen() system call to <count> [int]. Default is 5.

CHILD option group

Options for addresses with multiple connections via child processes.

fork
    After establishing a connection, handles its channel in a child process and keeps the parent process attempting to produce more connections, either by listening or by connecting in a loop.
    SSL-CONNECT and SSL-LISTEN differ in when they actually fork off the child: SSL-LISTEN forks before the SSL handshake, while SSL-CONNECT forks afterwards. RETRY and FOREVER options are not inherited by the child process.

EXEC option group

Options for addresses that invoke a program.

path=<string>
    Overrides the PATH environment variable for searching the program with <string>. This $PATH value is effective in the child process too.

login
    Prefixes argv[0] for the execvp() call with '-', thus making a shell behave as login shell.

FORK option group

EXEC or SYSTEM addresses invoke a program using a child process and transfer data between socat and the program. The interprocess communication mechanism can be influenced with the following options. Per default, a socketpair() is created and assigned to stdin and stdout of the child process, while stderr is inherited from the socat process, and the child process uses file descriptors 0 and 1 for communicating with the main socat process.

nofork
    Does not fork a subprocess for executing the program, instead calls execvp() or system() directly from the actual socat instance. This avoids the overhead of another process between the program and its peer, but introduces a lot of restrictions:

o   this option can only be applied to the second socat address.

o   it cannot be applied to a part of a dual address.

o   the first socat address cannot be OPENSSL or READLINE

o   socat options -b, -t, -D, -l, -v, -x become useless

o   for both addresses, options ignoreeof, cr, and crnl become useless

o   for the second address (the one with option nofork), options append, cloexec, flock, user, group, mode, nonblock, perm-late, setlk, and setpgid cannot be applied. Some of these could be used on the first address though.

pipes
    Creates a pair of unnamed pipes for interprocess communication instead of a socket pair.

openpty
    Establishes communication with the sub process using a pseudo terminal created with openpty() instead of the default (socketpair or ptmx).

ptmx
    Establishes communication with the sub process using a pseudo terminal created by opening /dev/ptmx or /dev/ptc instead of the default (socketpair).

pty Establishes communication with the sub process using a pseudo terminal instead of a socket pair. Creates the pty with an available mechanism. If openpty and ptmx are both available, it uses ptmx because this is POSIX compliant.

ctty
    Makes the pty the controlling tty of the sub process.

stderr
    Directs stderr of the sub process to its output channel by making stderr a dup() of stdout.

fdin=<fdnum>
    Assigns the sub processes input channel to its file descriptor <fdnum> instead of stdin (0). The program started from the subprocess has to use this fd for reading data from socat.

fdout=<fdnum>
    Assigns the sub processes output channel to its file descriptor <fdnum> instead of stdout (1). The program started from the subprocess has to use this fd for writing data to socat.

sighup, sigint, sigquit
    Has socat pass an eventual signal of this type to the sub process. If no address has this option, socat terminates on these signals.

TERMIOS option group

For addresses that work on a tty (e.g., stdio, file:/dev/tty, exec:...,pty), the terminal parameters defined in the UN*X termios mechanism are made available as address option parameters. Please note that changes of the parameters of your interactive terminal remain effective after socat's termination, so you might have to enter "reset" or "stty sane" in your shell afterwards. For EXEC and SYSTEM addresses with option PTY, these options apply to the pty by the child processes.

b0  Disconnects the terminal.

b19200
    Sets the serial line speed to 19200 baud. Some other rates are possible; use something like socat -hh |grep ' b[1-9]' to find all speeds supported by your implementation.
    Note: On some operating systems, these options may not be available. Use ispeed or ospeed instead.

echo=<bool>
    Enables or disables local echo.

icanon=<bool>
    Sets or clears canonical mode, enabling line buffering and some special characters.

raw Sets raw mode, thus passing input and output almost unprocessed.

ignbrk=<bool>
    Ignores or interpretes the BREAK character (e.g., ^C)

brkint=<bool>

bs0

bs1

bsdly=<0|1>

clocal=<bool>

    .LP .nf cr0 cr1 cr2 cr3 .fi .IP Sets the carriage return delay to 0, 1, 2, or 3, respectively. 0 means no delay, the other values are terminal dependent.

crdly=<0|1|2|3>

cread=<bool>

crtscts=<bool>

    .LP .nf cs5 cs6 cs7 cs8 .fi .IP Sets the character size to 5, 6, 7, or 8 bits, respectively.

csize=<0|1|2|3>

cstopb=<bool>
    Sets two stop bits, rather than one.

dsusp=<byte>
    Sets the value for the VDSUSP character that suspends the current foreground process and reactivates the shell (all except Linux).

echoctl=<bool>
    Echos control characters in hat notation (e.g. ^A)

echoe=<bool>

echok=<bool>

echoke=<bool>

echonl=<bool>

echoprt=<bool>

eof=<byte>

eol=<byte>

eol2=<byte>

erase=<byte>

discard=<byte>

ff0

ff1

ffdly=<bool>

flusho=<bool>

hupcl=<bool>

icrnl=<bool>

iexten=<bool>

igncr=<bool>

ignpar=<bool>

imaxbel=<bool>

inlcr=<bool>

inpck=<bool>

intr=<byte>

isig=<bool>

ispeed=<unsigned-int>
    Set the baud rate for incoming data on this line.
    See also: ospeed, b19200 dif(istrip=<bool>)

iuclc=<bool>

ixany=<bool>

ixoff=<bool>

ixon=<bool>

kill=<byte>

lnext=<byte>

min=<byte>

nl0 Sets the newline delay to 0.

nl1

nldly=<bool>

noflsh=<bool>

ocrnl=<bool>

ofdel=<bool>

ofill=<bool>

olcuc=<bool>

onlcr=<bool>

onlret=<bool>

onocr=<bool>

opost=<bool>
    Enables or disables output processing; e.g., converts NL to CR-NL.

ospeed=<unsigned-int>
    Set the baud rate for outgoing data on this line.
    See also: ispeed, b19200

parenb=<bool>
    Enable parity generation on output and parity checking for input.

parmrk=<bool>

parodd=<bool>

pendin=<bool>

quit=<byte>

reprint=<byte>

sane
    Brings the terminal to something like a useful default state.

start=<byte>

stop=<byte>

susp=<byte>

swtc=<byte>

tab0

tab1

tab2

tab3

tabdly=<unsigned-int>

time=<byte>

tostop=<bool>

vt0

vt1

vtdly=<bool>

werase=<byte>

xcase=<bool>

xtabs

PTY option group

These options are intended for use with the pty address type.

link=<filename>
    Generates a symbolic link that points to the actual pseudo terminal (pty). This might help to solve the problem that ptys are generated with more or less unpredictable names, making it difficult to directly access the socat generated pty automatically. With this option, the user can specify a "fix" point in the file hierarchy that helps him to access the actual pty. Beginning with socat version 1.4.3, the symbolic link is removed when the address is closed (but see option unlink-close).

wait-slave
    Blocks the open phase until a process opens the slave side of the pty. Usually, socat continues after generating the pty with opening the next address or with entering the transfer loop. With the wait-slave option, socat waits until some process opens the slave side of the pty before continuing. This option only works if the operating system provides the poll() system call. And it depends on an undocumented behaviour of pty's, so it does not work on all operating systems. It has successfully been tested on Linux, FreeBSD, NetBSD, and on Tru64 with openpty.

pty-intervall=<seconds>
    When the wait-slave option is set, socat periodically checks the HUP condition using poll() to find if the pty's slave side has been opened. The default polling intervall is 1s. Use the pty-intervall option [timeval] to change this value.

OPENSSL option group

These options apply to the openssl and openssl-listen address types.

cipher=<cipherlist>
    Selects the list of ciphers that may be used for the connection. See the man page of ciphers, section CIPHER LIST FORMAT, for detailed information about syntax, values, and default of <cipherlist>.
    Several cipher strings may be given, separated by ':'. Some simple cipher strings:

3DES
    Uses a cipher suite with triple DES.

MD5 Uses a cipher suite with MD5.

aNULL
    Uses a cipher suite without authentication.

NULL
    Does not use encryption.

HIGH
    Uses a cipher suite with "high" encryption. Note that the peer must support the selected property, or the negotiation will fail.

method=<ssl-method>
    Sets the protocol version to be used. Valid strings (not case sensitive) are:

SSLv2
    Select SSL protocol version 2.

SSLv3
    Select SSL protocol version 3.

SSLv23
    Select SSL protocol version 2 or 3. This is the default when this option is not provided.

TLSv1
    Select TLS protocol version 1.

verify=<bool>
    Controls check of the peer's certificate. Default is 1 (true) for client and 0 (false) for server addresses. Disabling verify might open your socket for everyone!

cert=<filename>
    Specifies the file with the certificate and private key for authentication. The certificate must be in OpenSSL format (*.pem). With openssl-listen, use of this option is strongly recommended. Except with cipher aNULL, "no shared ciphers" error will occur when no certificate is given.

key=<filename>
    Specifies the file with the private key. The private key may be in this file or in the file given with the cert option. The party that has to proof that it is the owner of a certificate needs the private key.

dhparams=<filename>
    Specifies the file with the Diffie Hellman parameters. These parameters may also be in the file given with the cert option in which case the dhparams option is not needed.

cafile=<filename>
    Specifies the file with the trusted (root) authority certificates. The file must be in PEM format and should contain one or more certificates. The party that checks the authentication of its peer trusts only certificates that are in this file.

capath=<dirname>
    Specifies the directory with the trusted (root) certificates. The directory must contain certificates in PEM format and their hashes (see OpenSSL documentation)

egd=<filename>
    On some systems, openssl requires an explicit source of random data. Specify the socket name where an entropy gathering daemon like egd provides random data, e.g. /dev/egd-pool.

pseudo
    On systems where openssl cannot find an entropy source and where no entropy gathering daemon can be utilized, this option activates a mechanism for providing pseudo entropy. This is archieved by taking the current time in microseconds for feeding the libc pseudo random number generator with an initial value. openssl is then feeded with output from random() calls.
    NOTE:This mechanism is not sufficient for generation of secure keys!

fips
    Enables FIPS mode if compiled in. For info about the FIPS encryption implementation standard see http://oss-institute.org/fips-faq.html. This mode might require that the involved certificates are generated with a FIPS enabled version of openssl. Setting or clearing this option on one socat address affects all OpenSSL addresses of this process.

RETRY option group

Options that control retry of some system calls, especially connection attempts.

retry=<num>
    Number of retries before the connection or listen attempt is aborted. Default is 0, which means just one attempt.

intervall=<timespec>
    Time between consecutive attempts (seconds, [timespec]). Default is 1 second.

forever
    Performs an unlimited number of retry attempts.

DATA VALUES

This section explains the different data types that address parameters and address options can take.

address-range
    Is currently only implemented for IPv4 and IPv6. See address-option `range'

bool
    "0" or "1"; if value is omitted, "1" is taken.

byte
    An unsigned int number, read with strtoul(), lower or equal to UCHAR_MAX.

command-line
    A string specifying a program name and its arguments, separated by single spaces.

data
    A raw data specification following dalan syntax. The only documented form is a string starting with 'x' followed by an even number of hex digits.

directory
    A string with usual UN*X directory name semantics.

facility
    The name of a syslog facility in lower case characters.

fdnum
    An unsigned int type, read with strtoul(), specifying a UN*X file descriptor.

filename
    A string with usual UN*X filename semantics.

group
    If the first character is a decimal digit, the value is read with strtoul() as unsigned integer specifying a group id. Otherwise, it must be an existing group name.

int A number following the rules of the strtol() function with base "0", i.e. decimal number, octal number with leading "0", or hexadecimal number with leading "0x". The value must fit into a C int.

interface
    A string specifying the device name of a network interface, e.g. "eth0".

IP address
    An IPv4 address in numbers-and-dots notation, an IPv6 address in hex notation enclosed in brackets, or a hostname that resolves to an IPv4 or an IPv6 address.
    Examples: 127.0.0.1, [::1], www.dest-unreach.org, dns1

IPv4 address
    An IPv4 address in numbers-and-dots notation or a hostname that resolves to an IPv4 address.
    Examples: 127.0.0.1, www.dest-unreach.org, dns2

IPv6 address
    An iPv6 address in hexnumbers-and-colons notation enclosed in brackets, or a hostname that resolves to an IPv6 address.
    Examples: [::1], [1234:5678:9abc:def0:1234:5678:9abc:def0], ip6name.domain.org

long
    A number read with strtol(). The value must fit into a C long.

long long
    A number read with strtoll(). The value must fit into a C long long.

off_t
    An implementation dependend signed number, usually 32 bits, read with strtol or strtoll.

off64_t
    An implementation dependend signed number, usually 64 bits, read with strtol or strtoll.

mode_t
    An unsigned integer, read with strtoul(), specifying mode (permission) bits.

pid_t
    A number, read with strtol(), specifying a process id.

port
    A uint16_t (16 bit unsigned number) specifying a TCP or UDP port, read with strtoul().

protocol
    An unsigned 8 bit number, read with strtoul().

size_t
    An unsigned number with size_t limitations, read with strtoul.

sockname
    A socket address. See address-option `bind'

string
    A sequence of characters, not containing '\0' and, depending on the position within the command line, ':', ',', or "!!". Note that you might have to escape shell meta characters in the command line.

TCP service
    A service name, not starting with a digit, that is resolved by getservbyname(), or an unsigned int 16 bit number read with strtoul().

timeval
    A double float specifying seconds; the number is mapped into a struct timeval, consisting of seconds and microseconds.

timespec
    A double float specifying seconds; the number is mapped into a struct timespec, consisting of seconds and nanoseconds.

UDP service
    A service name, not starting with a digit, that is resolved by getservbyname(), or an unsigned int 16 bit number read with strtoul().

unsigned int
    A number read with strtoul(). The value must fit into a C unsigned int.

user
    If the first character is a decimal digit, the value is read with strtoul() as unsigned integer specifying a user id. Otherwise, it must be an existing user name.

EXAMPLES

socat - TCP4:www.domain.org:80

    Transfers data between STDIO (-) and a TCP4 connection to port 80 of host www.domain.org. This example results in an interactive connection similar to telnet or netcat. The stdin terminal parameters are not changed, so you may close the relay with ^D or abort it with ^C.

    .LP .nf socat -d -d READLINE,history=$HOME/.http_history \ TCP4:www.domain.org:www,crnl .fi

    This is similar to the previous example, but you can edit the current line in a bash like manner (READLINE) and use the history file .http_history; socat prints messages about progress (-d -d). The port is specified by service name (www), and correct network line termination characters (crnl) instead of NL are used.

socat TCP4-LISTEN:www TCP4:www.domain.org:www

    Installs a simple TCP port forwarder. With TCP4-LISTEN it listens on local port "www" until a connection comes in, accepts it, then connects to the remote host (TCP4) and starts data transfer. It will not accept a second connection.

    .LP .nf socat -d -d -lmlocal2 \ TCP4-LISTEN:80,bind=myaddr1,su=nobody,fork,range=10.0.0.0/8,reuseaddr \ TCP4:www.domain.org:80,bind=myaddr2 .fi

    TCP port forwarder, each side bound to another local IP address (bind). This example handles an almost arbitrary number of parallel or consecutive connections by fork'ing a new process after each accept(). It provides a little security by su'ing to user nobody after forking; it only permits connections from the private 10 network (range); due to reuseaddr, it allows immediate restart after master process's termination, even if some child sockets are not completely shut down. With -lmlocal2, socat logs to stderr until successfully reaching the accept loop. Further logging is directed to syslog with facility local2.

    .LP .nf socat TCP4-LISTEN:5555,fork,tcpwrap=script \ EXEC:/bin/myscript,chroot=/home/sandbox,su-d=sandbox,pty,stderr .fi

    A simple server that accepts connections (TCP4-LISTEN) and fork's a new child process for each connection; every child acts as single relay. The client must match the rules for daemon process name "script" in /etc/hosts.allow and /etc/hosts.deny, otherwise it is refused access (see "man 5 hosts_access"). For EXEC'uting the program, the child process chroot's to /home/sandbox, su's to user sandbox, and then starts the program /home/sandbox/bin/myscript. Socat and myscript communicate via a pseudo tty (pty); myscript's stderr is redirected to stdout, so its error messages are transferred via socat to the connected client.

    .LP .nf socat EXEC:"mail.sh target@domain.com",fdin=3,fdout=4 \ TCP4:mail.relay.org:25,crnl,bind=alias1.server.org,mss=512 .fi

    mail.sh is a shell script, distributed with socat, that implements a simple SMTP client. It is programmed to "speak" SMTP on its FDs 3 (in) and 4 (out). The fdin and fdout options tell socat to use these FDs for communication with the program. Because mail.sh inherits stdin and stdout while socat does not use them, the script can read a mail body from stdin. Socat makes alias1 your local source address (bind), cares for correct network line termination (crnl) and sends at most 512 data bytes per packet (mss).

socat - /dev/ttyS0,raw,echo=0,crnl

    Opens an interactive connection via the serial line, e.g. for talking with a modem. raw and echo set ttyS0's terminal parameters to practicable values, crnl converts to correct newline characters. Consider using READLINE instead of `-'.

    .LP .nf socat UNIX-LISTEN:/tmp/.X11-unix/X1,fork \ SOCKS4:host.victim.org:127.0.0.1:6000,socksuser=nobody,sourceport=20 .fi

    With UNIX-LISTEN, socat opens a listening UNIX domain socket /tmp/.X11-unix/X1. This path corresponds to local XWindow display :1 on your machine, so XWindow client connections to DISPLAY=:1 are accepted. Socat then speaks with the SOCKS4 server host.victim.org that might permit sourceport 20 based connections due to an FTP related weakness in its static IP filters. Socat pretends to be invoked by socksuser nobody, and requests to be connected to loopback port 6000 (only weak sockd configurations will allow this). So we get a connection to the victims XWindow server and, if it does not require MIT cookies or Kerberos authentication, we can start work. Please note that there can only be one connection at a time, because TCP can establish only one session with a given set of addresses and ports.

socat -u /tmp/readdata,seek-end=0,ignoreeof -

    This is an example for unidirectional data transfer (-u). Socat transfers data from file /tmp/readdata (implicit address GOPEN), starting at its current end (seek-end=0 lets socat start reading at current end of file; use seek=0 or no seek option to first read the existing data) in a "tail -f" like mode (ignoreeof). The "file" might also be a listening UNIX domain socket (do not use a seek option then).

    .LP .nf (sleep 5; echo PASSWORD; sleep 5; echo ls; sleep 1) | socat - EXEC:'ssh -l user server',pty,setsid,ctty .fi

    EXEC'utes an ssh session to server. Uses a pty for communication between socat and ssh, makes it ssh's controlling tty (ctty), and makes this pty the owner of a new process group (setsid), so ssh accepts the password from socat.

    .LP .nf socat -u TCP4-LISTEN:3334,reuseaddr,fork \ OPEN:/tmp/in.log,creat,append .fi

    Implements a simple network based message collector. For each client connecting to port 3334, a new child process is generated (option fork). All data sent by the clients are append'ed to the file /tmp/in.log. If the file does not exist, socat creat's it. Option reuseaddr allows immediate restart of the server process.

socat READLINE,noecho='[Pp]assword:' EXEC:'ftp ftp.server.com',pty,setsid,ctty

    Wraps a command line history (READLINE) around the EXEC'uted ftp client utility. This allows editing and reuse of FTP commands for relatively comfortable browsing through the ftp directory hierarchy. The password is echoed! pty is required to have ftp issue a prompt. Nevertheless, there may occur some confusion with the password and FTP prompts.

socat PTY,link=$HOME/dev/vmodem0,raw,echo=0,waitslave exec:'

    Generates a pseudo terminal device (PTY) on the client that can be reached under the symbolic link $HOME/dev/vmodem0. An application that expects a serial line or modem can be configured to use $HOME/dev/vmodem0; its traffic will be directed to a modemserver via ssh where another socat instance links it with /dev/ttyS0.

    .LP .nf socat TCP4-LISTEN:2022,reuseaddr,fork \ PROXY:proxy:www.domain.org:22,proxyport=3128,proxyauth=user:pass .fi

    starts a forwarder that accepts connections on port 2022, and directs them through the proxy daemon listening on port 3128 (proxyport) on host proxy, using the CONNECT method, where they are authenticated as "user" with "pass" (proxyauth). The proxy should establish connections to host www.domain.org on port 22 then.

echo |socat -u - file:/tmp/bigfile,create,largefile,seek=100000000000

    creates a 100GB sparse file; this requires a file system type that supports this (ext2, ext3, reiserfs, jfs; not minix, vfat). The operation of writing 1 byte might take long (reiserfs: some minutes; ext2: "no" time), and the resulting file can consume some disk space with just its inodes (reiserfs: 2MB; ext2: 16KB).

socat tcp-l:7777,reuseaddr,fork system:'filan -i 0 -s >&2',nofork

    listens for incoming TCP connections on port 7777. For each accepted connection, invokes a shell. This shell has its stdin and stdout directly connected to the TCP socket (nofork). The shell starts filan and lets it print the socket addresses to stderr (your terminal window).

echo -e

    functions as primitive binary editor: it writes the 4 bytes 000 014 000 000 to the executable /usr/bin/squid at offset 0x00074420 (this is a real world patch to make the squid executable from Cygwin run under Windows, actual per May 2004).

socat - tcp:www.blackhat.org:31337,readbytes=1000

    connect to an unknown service and prevent being flooded.

DIAGNOSTICS

Socat uses a logging mechanism that allows to filter messages by severity. The severities provided are more or less compatible to the appropriate syslog priority. With one or up to four occurrences of the -d command line option, the lowest priority of messages that are issued can be selected. Each message contains a single uppercase character specifying the messages severity (one of F, E, W, N, I, or D)

FATAL:
    Conditions that require unconditional and immediate program termination.

ERROR:
    Conditions that prevent proper program processing. Usually the program is terminated (see option -s).

WARNING:
    Something did not function correctly or is in a state where correct further processing cannot be guaranteed, but might be possible.

NOTICE:
    Interesting actions of the program, e.g. for supervising socat in some kind of server mode.

INFO:
    Description of what the program does, and maybe why it happens. Allows to monitor the lifecycles of file descriptors.

DEBUG:
    Description of how the program works, all system or library calls and their results.

Log messages can be written to stderr, to a file, or to syslog.

On exit, socat gives status 0 if it terminated due to EOF or inactivity timeout, with a positive value on error, and with a negative value on fatal error.

FILES

/usr/local/bin/socat
/usr/local/bin/filan
/usr/local/bin/procan

ENVIRONMENT VARIABLES

SOCAT_DEFAULT_LISTEN_IP
    (Values 4 or 6) Sets the IP version to be used for listen, recv, and recvfrom addresses if no pf (protocol-family) option is given. Is overridden by socat options -4 or -6.

SOCAT_PREFERRED_RESOLVE_IP
    (Values 0, 4, or 6) Sets the IP version to be used when resolving target host names when version is not specified by address type, option pf (protocol-family), or address format. If name resolution does not return a matching entry, the first result (with differing IP version) is taken. With value 0, socat always selects the first record and its IP version.

SOCAT_FORK_WAIT
    Specifies the time (seconds) to sleep the parent and child processes after successful fork(). Useful for debugging.

HOSTNAME
    Is used to determine the hostname for logging (see -lh).

LOGNAME
    Is used as name for the socks client user name if no socksuser is given.
    With options su and su-d, LOGNAME is set to the given user name.

USER
    Is used as name for the socks client user name if no socksuser is given and LOGNAME is empty.
    With options su and su-d, USER is set to the given user name.

SHELL
    With options su and su-d, SHELL is set to the login shell of the given user.

PATH
    Can be set with option path for exec and system addresses.

HOME
    With options su and su-d, HOME is set to the home directory of the given user.

CREDITS

The work of the following groups and organizations was invaluable for this project:

The FSF (GNU, http://www.fsf.org/ project with their free and portable development software and lots of other useful tools and libraries.

The Linux developers community (http://www.linux.org/) for providing a free, open source operating system.

Sourceforge (http://www.sourceforge.net/) for providing a compile farm with Solaris, FreeBSD, and MacOS X machines, making these ports possible.

The Open Group (http://www.unix-systems.org/) for making their standard specifications available on the Internet for free.

VERSION

This man page describes version 1.5.0 of socat.

BUGS

Addresses cannot be nested, so a single socat process cannot, e.g., drive ssl over socks.

Address option ftruncate without value uses default 1 instead of 0.

Verbose modes (-x and/or -v) display line termination characters inconsistently when address options cr or crnl are used: They show the data after conversion in either direction.

The data transfer blocksize setting (-b) is ignored with address readline.

Send bug reports to <socat@dest-unreach.org>

SEE ALSO

nc(1), netcat6(1), sock(1), rinetd(8), cage(1), socks.conf(5), openssl(1), stunnel(8), pty(1), rlwrap(1), setsid(1)

Socat home page http://www.dest-unreach.org/socat/

AUTHOR

Gerhard Rieger <rieger@dest-unreach.org>