HPING(8)

NAME
hping - send (almost) arbitrary TCP/IP packets to network hosts

SYNOPSIS
hping [ -hvnqVDzZ012WrfxykQbFSRPAUXYjJBuTG ] [ -c count ] [ -i wait ] [ --fast ] [ -I interface ] [ -9 signature ] [ -a host ] [ -t ttl ] [ -N ip id ] [ -H ip protocol ] [ -g fragoff ] [ -m mtu ] [ -o tos ] [ -C icmp type ] [ -K icmp code ] [ -s source port ] [ -p[+][+] dest port ] [ -w tcp window ] [ -O tcp offset ] [ -M tcp sequence number ] [ -L tcp ack ] [ -d data size ] [ -E filename ] [ -e signature ] [ --icmp-ipver version ] [ --icmp-iphlen length ] [ --icmp-iplen length ] [ --icmp-ipid id ] [ --icmp-ipproto protocol ] [ --icmp-cksum checksum ] [ --icmp-ts ] [ --icmp-addr ] [ --tcpexitcode ] [ --tcp-timestamp ] [ --tr-stop ] [ --tr-keep-ttl ] [ --tr-no-rtt ] [ --rand-dest ] [ --rand-source ] hostname

DESCRIPTION
hping is a network tool able to send custom TCP/IP packets and to display target replies like ping program does with ICMP replies. hping handle fragmentation, arbitrary packets body and size and can be used in order to transfer files encapsulated under supported protocols. Using hping you are able to perform at least the following stuff:
 - Test firewall rules
 - Advanced port scanning
 - Test net performance using different protocols,
   packet size, TOS (type of service) and fragmentation.
 - Path MTU discovery
 - Transferring files between even really fascist firewall
   rules.
 - Traceroute-like under different protocols.
 - Firewalk-like usage.
 - Remote OS fingerprinting.
 - TCP/IP stack auditing.
 - A lot of others. It's also a good didactic tool to learn TCP/IP. hping is developed and maintained by antirez@invece.org and is licensed under GPL version 2. Development is open so you can send me patches, suggestion and affronts without inhibitions.

HPING SITE
primary site at http://www.hping.org You can found both the stable release and the instruction to download the latest source code at http://www.hping.org/download.html

BASE OPTIONS

-h --help
    Show an help screen on standard output, so you can pipe to less.

-v --version
    Show version information and API used to access to data link layer, linux sock packet or libpcap

-c --count count
    Stop after sending (and receiving) count response packets. After last packet was send hping wait COUNTREACHED_TIMEOUT seconds target host replies. You are able to tune COUNTREACHED_TIMEOUT editing hping.h

-i --interval
    Wait the specified number of seconds or micro seconds between sending each packet. --interval X set wait to X seconds, --interval uX set wait to X micro seconds. The default is to wait one second between each packet. Using hping to transfer files tune this option is really important in order to increase transfer rate. Even using hping to perform idle/spoofing scanning you should tune this option, see HPING-HOWTO for more information.

--fast
    Alias for -i u10000. Hping will send 10 packets for second.

-n --numeric
    Numeric output only, No attempt will be made to lookup symbolic names for host addresses.

-q --quiet
    Quiet output. Nothing is displayed except the summary lines at startup time and when finished.

-I --interface interface name
    By default on linux and BSD systems hping uses default routing interface. In other systems or when there is no default route hping uses the first non-loopback interface. However you are able to force hping to use the interface you need using this option. Note: you don't need to specify the whole name, for example -I et will match eth0 ethernet0 myet1 et cetera. If no interfaces match hping will try to use lo.

-V --verbose
    Enable verbose output. TCP replies will be shown as follows: len=46 ip=192.168.1.1 flags=RA DF seq=0 ttl=255 id=0 win=0 rtt=0.4 ms tos=0 iplen=40 seq=0 ack=1380893504 sum=2010 urp=0

-D --debug
    Enable debug mode, it's useful when you experience some problem with hping. When debug mode is enabled you will get more information about interface detection, data link layer access, interface settings, options parsing, fragmentation, HCMP protocol and other stuff.

-z --bind
    bind CTRL+Z to time to live (TTL) so you will able to increment/decrement ttl of outgoing packets pressing CTRL+Z once or twice.

-Z --unbind
    unbind CTRL+Z so you will able to stop hping

PROTOCOL SELECTION
Default protocol is TCP, by default hping will send tcp headers to target host's port 0 with a winsize of 64 without any tcp flag on. Often this is the best way to do an 'hide ping', useful when target is behind a firewall that drop ICMP. Moreover a tcp null-flag to port 0 has a good probability of not being logged.

-0 --rawip
    RAW IP mode, in this mode hping will send IP header with data appended with --signature and/or --file, see also --ipproto that allows you to set the ip protocol field.

-1 --icmp
    ICMP mode, by default hping will send ICMP echo-request, you can set other ICMP type/code using --icmptype --icmpcode options.

-2 --udp
    UDP mode, by default hping will send udp to target host's port 0. UDP header tunable options are the following: --baseport, --destport, --keep.

-9 --listen signature
    HPING listen mode, using this option hping waits for packet that contain signature and dump from signature end to packet's end. For example if hping --listen TEST reads a packet that contain 234-09sdflkjs45-TESThello_world it will display hello_world.

IP RELATED OPTIONS

-a --spoof hostname
    Use this option in order to set a fake IP source address, this option ensures that target will not gain your real address. However replies will be sent to spoofed address, so you will can't see them. In order to see how it's possible to perform spoofed/idle scanning see the HPING-HOWTO.

--rand-source
    This option enables the random source mode. hping will send packets with random source address. It is interesting to use this option to stress firewall state tables, and other per-ip basis dynamic tables inside the TCP/IP stacks and firewall software.

--rand-dest
    This option enables the random destination mode. hping will send the packets to random addresses obtained following the rule you specify as the target host. You need to specify a numerical IP address as target host like 10.0.0.x. All the occurrences of x will be replaced with a random number in the range 0-255. So to obtain internet IP addresses in the whole IPv4 space use something like hping x.x.x.x --rand-dest. If you are not sure about what kind of addresses your rule is generating try to use the --debug switch to display every new destination address generated. When this option is turned on, matching packets will be accept from all the destinations. Warning: when this option is enabled hping can't detect the right outgoing interface for the packets, so you should use the --interface option to select the desidered outgoing interface.

-t --ttl time to live
    Using this option you can set TTL (time to live) of outgoing packets, it's likely that you will use this with --traceroute or --bind options. If in doubt try ` hping some.host.com -t 1 --traceroute '.

-N --id
    Set ip->id field. Default id is random but if fragmentation is turned on and id isn't specified it will be getpid() & 0xFF , to implement a better solution is in TODO list.

-H --ipproto
    Set the ip protocol in RAW IP mode.

-W --winid
    Windows* id has different byte ordering, if this option is enable hping will properly display windows reply ids.

-r --rel
    Display id increments instead of id. See the HPING-HOWTO for more information. Increments aren't computed as id[N]-id[N-1] but using packet loss compensation. See relid.c for more information.

-f --frag
    Split packets in more fragments, this may be useful in order to test IP stacks fragmentation performance and to test if some packet filter is so weak that can be passed using tiny fragments (anachronistic). Default 'virtual mtu' is 16 bytes. see also --mtu option.

-x --morefrag
    Set more fragments IP flag, use this option if you want that target host send an ICMP time-exceeded during reassembly.

-y --dontfrag
    Set don't fragment IP flag, this can be used to perform MTU path discovery.

-g --fragoff fragment offset value
    Set the fragment offset

-m --mtu mtu value
    Set different 'virtual mtu' than 16 when fragmentation is enabled. If packets size is greater that 'virtual mtu' fragmentation is automatically turned on.

-o --tos hex_tos
    Set Type Of Service (TOS) , for more information try --tos help

-G --rroute
    Record route. Includes the RECORD_ROUTE option in each packet sent and displays the route buffer of returned packets. Note that the IP header is only large enough for nine such routes. Many hosts ignore or discard this option. Also note that using hping you are able to use record route even if target host filter ICMP. Record route is an IP option, not an ICMP option, so you can use record route option even in TCP and UDP mode.

ICMP RELATED OPTIONS

-C --icmptype type
    Set icmp type, default is ICMP echo request (implies --icmp)

-K --icmpcode code
    Set icmp code, default is 0. (implies --icmp)

--icmp-ipver
    Set IP version of IP header contained into ICMP data, default is 4.

--icmp-iphlen
    Set IP header length of IP header contained into ICMP data, default is 5 (5 word of 32 bits).

--icmp-iplen
    Set IP packet length of IP header contained into ICMP data, default is the real length.

--icmp-ipid
    Set IP id of IP header contained into ICMP data, default is random.

--icmp-ipproto
    Set IP protocol of IP header contained into ICMP data, default is TCP.

--icmp-cksum
    Set ICMP checksum, for default is the valid checksum.

--icmp-ts
    Alias for --icmptype 13 (to send ICMP timestamp requests)

--icmp-addr
    Alias for --icmptype 17 (to send ICMP address mask requests)

TCP/UDP RELATED OPTIONS

-s --baseport source port
    hping uses source port in order to guess replies sequence number. It starts with a base source port number, and increase this number for each packet sent. When packet is received sequence number can be computed as replies.dest.port - base.source.port. Default base source port is random, using this option you are able to set different number. If you need that source port not be increased for each sent packet use the -k --keep option.

-p --destport [+][+]dest port
    Set destination port, default is 0. If '+' character precedes dest port number (i.e. +1024) destination port will be increased for each reply received. If double '+' precedes dest port number (i.e. ++1024), destination port will be increased for each packet sent. By default destination port can be modified interactively using CTRL+z.

--keep
    keep still source port, see --baseport for more information.

-w --win
    Set TCP window size. Default is 64.

-O --tcpoff
    Set fake tcp data offset. Normal data offset is tcphdrlen / 4.

-M --tcpseq
    Set the TCP sequence number.

-L --tcpack
    Set the TCP ack.

-Q --seqnum
    This option can be used in order to collect sequence numbers generated by target host. This can be useful when you need to analyze whether TCP sequence number is predictable. Output example: #hping win98 --seqnum -p 139 -S -i u1 -I eth0
    HPING uaz (eth0 192.168.4.41): S set, 40 headers + 0 data bytes
    2361294848 +2361294848
    2411626496 +50331648
    2545844224 +134217728
    2713616384 +167772160
    2881388544 +167772160
    3049160704 +167772160
    3216932864 +167772160
    3384705024 +167772160
    3552477184 +167772160
    3720249344 +167772160
    3888021504 +167772160
    4055793664 +167772160
    4223565824 +167772160
    The first column reports the sequence number, the second difference between current and last sequence number. As you can see target host's sequence numbers are predictable.

-b --badcksum
    send packets with a bad UDP/TCP checksum

--tcp-timestamp
    enable the TCP timestamp option, and try to guess the timestamp update frequency and the remote system uptime.

-F --fin
    set FIN tcp flag.

-S --syn
    set SYN tcp flag.

-R --rst
    set RST tcp flag.

-P --push
    set PUSH tcp flag.

-A --ack
    set ACK tcp flag.

-U --urg
    set URG tcp flag.

-X --xmas
    set Xmas tcp flag.

-Y --ymas
    set Ymas tcp flag.

COMMON OPTIONS

-d --data data size
    set packet body size. Warning, using --data 40 hping will not generate 0 byte packets but protocol_header+40 bytes. hping will display packet size information as first line output, like this: HPING www.yahoo.com (ppp0 204.71.200.67): NO FLAGS are set, 40 headers + 40 data bytes

-E --file filename
    Use filename contents to fill packet's data.

-e --sign signature
    Fill first signature length bytes of data with signature. If the signature length is bigger than data size an error message will be displayed. If you don't specify the data size hping will use the signature size as data size. This option can be used safely with --file filename option, remainder data space will be filled using filename

-j --dump
    Dump received packets in hex.

-J --print
    Dump received packets's printable characters.

-B --safe
    Enable safe protocol, using this option lost packets in file transfers will be resent. For example in order to send file /etc/passwd from host A to host B you may use the following:
    [host_a]
    # hping host_b --udp -p 53 -d 100 --sign signature --safe --file /etc/passwd
    [host_b]
    # hping host_a --listen signature --safe --icmp

-u --end
    If you are using --file filename option, tell you when EOF has been reached. Moreover prevent that other end accept more packets. Please, for more information see the HPING-HOWTO.

-T --traceroute
    Traceroute mode. Using this option hping will increase ttl for each ICMP time to live 0 during transit received. Try hping host --traceroute. This option implies --bind and --ttl 1. You can override the ttl of 1 using the --ttl option. Since 2.0.0 stable it prints RTT information.

--tr-keep-ttl
    Keep the TTL fixed in traceroute mode, so you can monitor just one hop in the route. For example, to monitor how the 5th hop changes or how its RTT changes you can try hping host --traceroute --ttl 5 --tr-keep-ttl.

--tr-stop
    If this option is specified hping will exit once the first packet that isn't an ICMP time exceeded is received. This better emulates the traceroute behavior.

--tr-no-rtt
    Don't show RTT information in traceroute mode. The ICMP time exceeded RTT information aren't even calculated if this option is set.

--tcpexitcode
    Exit with last received packet tcp->th_flag as exit code. Useful for scripts that need, for example, to known if the port 999 of some host reply with SYN/ACK or with RST in response to SYN, i.e. the service is up or down.

TCP OUTPUT FORMAT
The standard TCP output format is the following: len=46 ip=192.168.1.1 flags=RA DF seq=0 ttl=255 id=0 win=0 rtt=0.4 ms len is the size, in bytes, of the data captured from the data link layer excluding the data link header size. This may not match the IP datagram size due to low level transport layer padding. ip is the source ip address. flags are the TCP flags, R for RESET, S for SYN, A for ACK, F for FIN, P for PUSH, U for URGENT, X for not standard 0x40, Y for not standard 0x80. If the reply contains DF the IP header has the don't fragment bit set. seq is the sequence number of the packet, obtained using the source port for TCP/UDP packets, the sequence field for ICMP packets. id is the IP ID field. win is the TCP window size. rtt is the round trip time in milliseconds. If you run hping using the -V command line switch it will display additional information about the packet, example: len=46 ip=192.168.1.1 flags=RA DF seq=0 ttl=255 id=0 win=0 rtt=0.4 ms tos=0 iplen=40 seq=0 ack=1223672061 sum=e61d urp=0 tos is the type of service field of the IP header. iplen is the IP total len field seq and ack are the sequence and acknowledge 32bit numbers in the TCP header. sum is the TCP header checksum value urp is the TCP urgent pointer value

UDP OUTPUT FORMAT
The standard output format is: len=46 ip=192.168.1.1 seq=0 ttl=64 id=0 rtt=6.0 ms The field meaning is just the same as the TCP output meaning of the same fields.

ICMP OUTPUT FORMAT
An example of ICMP output is: ICMP Port Unreachable from ip=192.168.1.1 name=nano.marmoc.net It is very simple to understand. It starts with the string "ICMP" followed by the description of the ICMP error, Port Unreachable in the example. The ip field is the IP source address of the IP datagram containing the ICMP error, the name field is just the numerical address resolved to a name (a dns PTR request) or UNKNOWN if the resolution failed. The ICMP Time exceeded during transit or reassembly format is a bit different: TTL 0 during transit from ip=192.168.1.1 name=nano.marmoc.net TTL 0 during reassembly from ip=192.70.106.25 name=UNKNOWN The only difference is the description of the error, it starts with TTL 0.

AUTHOR
Salvatore Sanfilippo <antirez@invece.org>, with the help of the people mentioned in AUTHORS file and at http://www.hping.org/authors.html

BUGS
Even using the --end and --safe options to transfer files the final packet will be padded with 0x00 bytes.

Data is read without care about alignment, but alignment is enforced in the data structures. This will not be a problem under i386 but, while usually the TCP/IP headers are naturally aligned, may create problems with different processors and bogus packets if there is some unaligned access around the code (hopefully none).

On solaris hping does not work on the loopback interface. This seems a solaris problem, as stated in the tcpdump-workers mailing list, so the libpcap can't do nothing to handle it properly.

SEE ALSO
ping(8), traceroute(8), ifconfig(8), nmap(1)